Excel Magnetics

Madhapar, Rajkot, Gujarat

The hopper magnet protects molding machinery and other processing equipment from damaging ferous metal separation can be conveniently monitored through the transparent drawer face. Slide gate shuts off product flow and is provided as a standadr deature. an easy clean desing is availabel. Hopper magnets remove small particles of frrous metal from free flowing powders and granular materials. These permanent magnetic separators are a very cost effective way to remov damaging tramp metal and light concentrations of ferrous contaminant from chmical, pharmaceutical, cosmetics, plastics, food, grain, fertilizer, sand, clay adn minerals.

Rare Earth Rod Magnets are extremely efficient at removing fine iron contamination from free flowing products such as ceramics slurry sugar, grain, tea, flour, granulate and any other types of powder with low moisture content. This item can be supplied with blank, tapped or studded ends for ease of installation. Rods are 25.4mm (1") in diameter, 32 mm diameter, 40 mm diameter and 50 mm diameter. Rods are particularly useful for those engineers who wish to build their own separator units or have severe room restrictions and are not able to accommodate a conventional unit. This product contact parts are manufactured using 304 & 316 grade stainless steel

Multi Stage Open Drawer Magnets which are available in different styles to suit specific application needs. Drawer Magnets consist of rows of round magnetic tubes that are assembled into drawers. The tubes of the drawer magnets are aligned on alternating centers from the row directly above or below it. The powerful magnets at the neck of the molding machine stops the flow of the tramp material directly into the machine parts. Our drawer magnets are very essential engineering products which are used for protecting injection molding machines, molds and dies.

Powder drawer Magnets provide excellent equipment and product protection of medium and fine ferrous contaminants in dry, free flowing products under gravity flow. Multiple staggered rows provide maximum contact area for product flow. As product flows through the stainless steel housing, it cascades over the staggered rows of magnetic tubes.

Drawer Magnets should be cleaned periodically for the most efficient performance. To clean the magnetic tubes, release the latch assembly and open the door. Remove the grate assemblies one at a time. Remove the tramp metal by hand. Use extreme caution and wear gloves during the process. Rare earth magnets are extremely powerful and tramp metal is very difficult to remove by hand.

Plate Magnets are designed for use in chutes and suspension over conveyed product. Installed on the bottom side of a chute, a Plate Magnet will provide maximum protection as product travels through the powerful magnetic circuit. The magnetic field projects from the face of the Plate Magnet reaching into the product stream and pulling the ferrous contaminants to the magnet face. The magnetic field on a Plate Magnet is strongest at the surface and gets weaker the further you move away.

Permanent Magnetic Plates are designed in various sizes & strengths to meet with specific operation & plant conditions. Magnetic Plates are widely used for removing Tramp iron such as Bolts, Nuts, Bits of Wire, Nails and other casual containmination from free flowing materials to protect against occasional damage to the plant caused by bits of iron.

Plate Magnets can ideally be used to remove tramp iron from the moving material carried in chutes ducts, spouts or on conveyor belts, screens and feed trays. Whether the material is plastic or paper pulp, food or fertilizer, Oil seeds or gains the result is sure protection of processing machinery and iron free final products

This unit simply suspendeds above the conveyor belt or the head pulley and lifts tramp metal from the product burden as it passes through the powerful magnetic field. Four eyebolts are provided for suspension (suspension chain not included). Cleaning is achieved by manually removing the collected tramp metal from the face of the magnet. E-Z CLEAN options are available to simplify cleaning. Available in permanent and electromagnetic designs.

Suspension Type Magnets use is recommended for low contamination products.Over band type Magnetic Separator is recommended for this type of application. The capacity of suspended magnet is 20 inch coverage area.

The principal applications are for processing of bulk products such as Culets, Glass, Cofee, Cereals, Minerals, Coal and Sugar etc.

Rare Earth Magnets are the most sturdy type of magnets available at present. These magnets are manufactured by us using several rare earth elements. Owing to the brittle nature of these magnets, we properly coat them with nickel to provide extra firmness. These magnets are widely used in computer hard drives, fishing reel brakes, audio speakers, bicycle dynamos, and so. We produce two primary varieties of rare earth magnets, i.e., Neodymium and Samarium-cobalt. Out of these, neodymium type rare earth magnet is comparatively cheaper. Samarium variety of rare earth magnet is a little expensive due to their complex manufacturing process and their special quality to withstand high temperatures.

Hump Magnets generally consist of two Plate Magnets mounted in an offset housing and are installed in vertical spouts. As product enters the housing it impacts directly on the face of the first Plate Magnet, travels through the offset angle of the housing and impacts directly on the face of the second Plate Magnet Hump magnet is a unique permanent magnetic equipment to remove tramp iron pieces from gravity flow or pneumatically conveyed mixtures, the surest way to protect your costly machinery from damages. A mist for cattle feed fertilizers food processing, salt in grain handling plants. Made from high coercively permanent magnets. Very powerful magnetic plates hinged on sturdy, M. S Housing arrest all the ferrous particles from the material and prevent damage to the machinery. The plates can be easily swung open and cleaned.

We are offering drawer magnets. multi stage open drawer magnets which are available in different styles to suit specific application needs. Drawer magnets consist of rows of round magnetic tubes that are assembled into drawers. The tubes of the drawer magnets are aligned on alternating centers from the row directly above or below it. The powerful magnets at the neck of the molding machine stops the flow of the tramp material directly into the machine parts. Our drawer magnets are very essential engineering products which are used for protecting injection molding machines, molds and dies. For more details please visit our website: http:goo.glr33upx

Grill magnets are important magnetic separators, used for separating tramp iron or ferrous contaminants from free flowing granular materials. Our grill magnet are made of rare earth magnets or ceramic magnets. The magnetic grills are aligned in certain angles that attracts the contaminants. Available in various shapes and sizes, our grill magnets have wide applicability in various industries like chemical industries, food processing industries, mining and mineral industries plastic and ceramic industries etc. Grill magnets offer excellent protection from metal contamination. As product flows over the magnetic tubes, captured metal contaminants are pushed to the underside of the tube where they are now out of contact with the product flow preventing was hoff back in to the clean material.For more details please visit

This unit suspended magnet simply suspended above the conveyor belt or the head pulley and lifts tramp metal from the product burden as it passes through the powerful magnetic field. Four eyebolts are provided for suspension (suspension chain not included). Cleaning is achieved by manually removing the collected tramp metal from the face of the magnet. E-z clean options are available to simplify cleaning. Available in permanent and electromagnetic designs. Suspension type magnets use is recommended for low contamination products. Over band type magnetic separator is recommended for this type of application. The capacity of suspended magnet is 20 inch coverage area. The principal applications are for processing of bulk products such as culets, glass, coffee, cereals, minerals, coal and sugar etc.

Lifting Magnets are excellently mandatory for lifting applications in the industries and handling them particularly ferrous objects. We manufacture them as required by our clients apart from standards specifications. Our clients can avail from us these products depending on their Weight, Stiffness, flexibility as well as shape of the load in addition to the area to be lifted.