Eteily Technologies India Pvt Ltd

Vidya Nagar, Bhopal, Madhya Pradesh

A 4G screw mount antenna that comes with an RG174 cable, specifically with a length of 3 meters (L-3MTR). Here’s a detailed breakdown of what you might be dealing with:

4G Screw Mount Antenna

• Design: This type of antenna is generally designed for robust outdoor or indoor use. The "screw mount" refers to how the antenna attaches—it typically screws into a mounting bracket or panel.
• Frequency: It’s optimized for 4G LTE frequencies, which means it’s designed to work with 4G networks, providing enhanced signal reception and transmission.
• Mounting: The screw mount feature makes it versatile for different installation locations, including vehicles, buildings, or other structures.

RG174 Cable

• Cable Type: RG174 is a coaxial cable known for its flexibility and is often used in applications where space is limited. It's suitable for higher frequency signals, like those used in 4G networks.
• Length (L-3MTR): The cable length is 3 meters (approximately 10 feet), which provides some flexibility in positioning the antenna away from the device it's connected to.

Connector Types

While the cable and antenna combination is often specified, the exact type of connector might vary. Common connectors include:

• SMA (Male or Female): Often used for connecting antennas to devices.
• TS9: Sometimes used in mobile broadband equipment.
• MCX or MMCX: Smaller connectors used in some specific applications.

Installation

1. Mounting: Secure the antenna to a suitable surface using the screw mount. Ensure it’s positioned where it can receive the best signal.
2. Cable Routing: Run the RG174 cable from the antenna to your device. Be mindful of cable routing to avoid kinks and ensure optimal signal transmission.
3. Connecting: Attach the cable to the device or router using the appropriate connector. Ensure a snug fit to avoid signal loss.

Applications

• Fixed Installations: Enhances signal strength in fixed locations, such as home or office setups.
• Vehicles: Provides better connectivity for mobile hotspots or other devices in vehicles.

A 4G screwable puck antenna that's designed for use with RG174 coaxial cable and has an SMA (Male) straight connector. Here’s a breakdown of the components:

1. 4G Screwable Puck Antenna: This type of antenna is typically used for mobile and fixed wireless communications. The "puck" shape often refers to its compact, circular design. The 4G designation means it's optimized for 4G LTE networks.

2. RG174 Cable (L-3MTR): RG174 is a type of coaxial cable that’s relatively thin and flexible. The "L-3MTR" indicates the length of the cable is 3 meters (approximately 10 feet).

3. SMA (M) Straight Connector: This is a common type of RF connector. The "M" stands for Male, meaning it has a protruding center pin. The straight design refers to the connector being linear, as opposed to angled.

4. 46mm: This could refer to the diameter of the antenna or a component of the connector.

This setup is often used in various wireless applications, including enhancing signal reception for 4G LTE devices or routers. If you have any specific questions or need help with installation, feel free to ask!

a 3G screw mount antenna system. Here’s a quick overview of the components and what they imply:

1. 3G Screw Mount Antenna: This type of antenna is often designed for mounting on surfaces like walls or poles, using screws. The "3G" indicates that it's optimized for 3G mobile network frequencies. The "cup shaped" part might refer to the design of the antenna, which can sometimes be a more compact, rounded form.

2. RG174 (L-3MTR) Cable: RG174 is a type of coaxial cable used for low-loss transmission in RF applications. It’s generally thinner and more flexible than RG58. The "L-3MTR" means the cable is 3 meters long, providing flexibility in positioning the antenna.

3. SMA Male St. Connector (Cup Shaped): The SMA (SubMiniature version A) connector is used to connect the coaxial cable to the antenna. The "Male St." (Straight) denotes the connector type, and "Cup Shaped" might refer to the physical design of the connector.

This setup is suitable for improving 3G signal reception or transmission. The screw mount allows for secure installation on various surfaces, and the RG174 cable offers flexibility and low-loss transmission over shorter distances. The SMA male connector ensures compatibility with devices that accept SMA connectors.

When installing, aim the antenna towards the strongest signal source and ensure that the cable and connector are properly connected to avoid signal loss.

A 915MHz screw mount antenna is designed for applications that operate at 915 MHz, a frequency commonly used in RF communications like RFID, IoT devices, and certain types of wireless systems. Here's a breakdown of the key features and what they mean:

1. 915MHz: This is the operating frequency of the antenna, suitable for devices that communicate at this specific UHF (Ultra High Frequency) range.

2. Screw Mount: This indicates that the antenna is designed to be secured with a screw or mounting hardware. It usually involves a threaded base or a mount that allows it to be attached to a panel or enclosure. This type of mount is beneficial for more permanent installations where a stable and secure connection is desired.

• Stable Mounting: The screw mount design ensures that the antenna is securely attached, reducing the risk of it becoming dislodged or shifting, which can impact performance.

• Durability: Often, screw mount antennas are built with more robust materials and are intended for more permanent installations compared to other types of mounts. This makes them suitable for industrial or outdoor environments.

• Customization: Screw mount antennas can often be customized or replaced without needing to replace the entire device. The threaded mount allows for different antennas to be used as needed for specific applications.

• Reduced Interference: A fixed, securely mounted antenna can provide better performance and reduced signal interference compared to more flexible or temporary mounting solutions.

• Industrial Equipment: Used in various industrial settings where reliable and stable RF communication is needed.

• RFID Systems: Common in RFID applications where a robust, permanent antenna setup is necessary.

• IoT Devices: Useful in Internet of Things devices that require consistent connectivity.

• Communications Systems: Suitable for systems where the antenna needs to be securely attached to ensure optimal signal reception and transmission.

When selecting a 915MHz screw mount antenna, ensure that it matches the connector type and mounting requirements of your device. This will help you achieve the best performance and reliability for your RF application.

Elevate your 5G connectivity with our high-performance 5G Screw Mount Puck Antenna, designed to deliver exceptional signal reception and durability. Ideal for both indoor and outdoor applications, this antenna provides reliable connectivity for a variety of 5G-enabled devices.

Key Features:

• 5G Connectivity: Optimized for 5G networks, this antenna ensures robust signal strength and high-speed data transfer, enhancing the performance of your 5G applications.
• Screw Mount Design: The puck-style antenna features a secure screw mount, providing stable installation on any flat surface. This design ensures optimal signal reception and minimizes interference.
• RG141 Cable: Comes with a 3-meter RG141 cable, known for its low signal loss and high durability. The cable's length offers flexibility in antenna placement and installation.
• SMA (M) Straight Connector: Includes an SMA male straight connector for a secure and reliable connection to your device or system. This connector ensures easy integration and robust signal integrity.
• Durable Construction: The 80mm diameter puck antenna is built to withstand harsh environmental conditions, making it suitable for a wide range of installations, from outdoor setups to industrial environments.

Applications:

• 5G Network Equipment
• Cellular Routers and Modems
• IoT Devices
• Wireless Communication Systems
• Remote and Outdoor Installations

4G LTE 4dBi screw mount duck-type antenna with an RG174 cable and an SMA (Male) straight connector. Here's a detailed breakdown of each component and what it means:

• 4G LTE: The antenna is designed to operate on 4G LTE networks, enhancing signal reception and transmission for devices that use this technology.
• 4dBi: This refers to the antenna's gain, which is 4 decibels relative to an isotropic radiator (dBi). The gain indicates how well the antenna can amplify the signal; in general, a higher dBi means better performance and signal reach. A 4dBi antenna provides a good balance between signal range and coverage.
• Screw Mount: This design allows the antenna to be securely attached to a mount or surface via a screw. This can be useful for fixed installations where stability is crucial.
• Duck Type: This describes the antenna's shape, which resembles a duck's head. Duck-type antennas are compact and often used for their ease of installation and decent performance in a variety of applications.

• RG174: This is a type of coaxial cable known for its flexibility and suitability for higher frequency signals. It's often used in applications where space constraints are a consideration.
• L-3MTR: Indicates that the cable length is 3 meters (approximately 10 feet), providing some flexibility in positioning the antenna relative to the device.

• SMA (Male): This connector type has a protruding center pin and is commonly used in RF applications. It’s designed to connect the antenna to a device with an SMA (Female) port.
• Straight Connector: The connector is straight rather than angled, which typically means it provides a direct connection with no bend or curve.

1. Mounting the Antenna: Secure the screw mount antenna to a stable surface using the provided screw or mounting hardware. Ensure it’s placed in a location that maximizes signal reception.

2. Connecting the Cable: Attach one end of the RG174 cable to the antenna and the other end to the device. Ensure the connections are tight to avoid signal loss.

3. Positioning: The performance of the antenna can be affected by its positioning. Ideally, place it in a location with minimal obstructions and where it can receive the best possible signal.

4. Testing: After installation, test the signal strength and performance to ensure the antenna is functioning optimally. Adjust the placement if necessary.

• Fixed Installations: Enhances signal strength for stationary devices such as routers, modems, or network equipment.
• Vehicles: Can be used in vehicles to improve connectivity for mobile internet devices or other communication systems.

Overview: The 868MHz Screw Mount Antenna with RG174 Cable and SMA Male Connector is a versatile and robust solution for enhancing wireless communication systems operating in the 868 MHz frequency band. Ideal for applications requiring reliable connectivity and ease of installation, this antenna is designed to provide strong performance and durability.

Key Features:

• Frequency Band: Optimized for the 868 MHz frequency, which is widely used in IoT, M2M, and other wireless communication technologies.
• Antenna Type: Screw mount design allows for secure attachment and stable performance, making it suitable for both permanent and temporary installations.
• Cable: Includes a 1-meter RG174 cable, known for its flexibility and low signal loss, which ensures effective transmission of signals between the antenna and your device.
• Connector Type: Features an SMA Male connector with a cup-shaped design for a reliable and easy connection to compatible devices.
• Design: The compact and efficient design of the antenna and cable assembly ensures minimal interference and optimal signal strength.

Applications:

• IoT Devices: Ideal for smart devices, sensors, and other IoT applications requiring stable and reliable wireless connectivity.
• Wireless Networking: Enhances the performance of wireless communication systems, including data acquisition and telemetry systems.
• M2M Communication: Provides effective communication for machine-to-machine applications in various industrial and commercial settings.

Installation:

• Mounting: The screw mount design allows for secure installation on surfaces such as walls, panels, or enclosures. Ensure proper alignment and tightening to maintain a stable connection.
• Cable Management: The included RG174 cable offers flexibility for easy routing and connection, reducing strain on the antenna and connector.

Benefits:

• Reliable Connectivity: Ensures strong and consistent signal reception and transmission for improved communication performance.
• Ease of Installation: The screw mount and SMA Male connector provide a straightforward installation process, suitable for both DIY and professional setups.
• Durable Construction: Designed to withstand various environmental conditions, ensuring long-term reliability and performance.

The GSM GPRS 5dBi Screw Mount Antenna with RG174 (L-3Mtr) + SMA (M) Straight Connector is an antenna system designed for use with GSM (Global System for Mobile Communications) and GPRS (General Packet Radio Service) communication systems. Here's a breakdown of its components and specifications:

1. GSM GPRS 5dBi Antenna:

   • The antenna is designed to operate in the GSM/GPRS frequency bands, typically ranging from 850 MHz to 1900 MHz (depending on the specific model), which are standard frequencies used by mobile networks for voice and data transmission.
   • The antenna has a 5dBi gain, which means it provides a moderate level of signal amplification compared to a simple dipole antenna (0 dBi). The higher gain improves the signal reception or transmission distance, making it suitable for communication devices where reliable GSM/GPRS signal is needed.

2. Screw Mount Design:

   • The screw mount feature allows for secure and stable installation of the antenna. This makes it ideal for use in devices or enclosures that require the antenna to be firmly attached, such as outdoor units, base stations, or industrial equipment.

3. RG174 Cable (L-3Mtr):

   • The antenna is connected to a 3-meter long RG174 cable. RG174 is a flexible coaxial cable often used in low-power, short-distance RF connections, such as mobile communications or GPS systems. It has a small diameter, making it easy to handle and integrate into compact devices.
   • The 3-meter length offers flexibility in positioning the antenna, allowing for better placement relative to the GSM/GPRS equipment or the area that needs coverage.

4. SMA (M) Straight Connector:

   • The antenna features an SMA male (M) straight connector. The SMA connector is widely used in RF systems due to its compact size and reliable performance. The male connector means it will plug into an SMA female jack, which is common in GSM/GPRS modules, routers, or communication equipment.
   • The straight design of the connector is ideal for situations where the cable needs to extend in a direct line from the device.

• GSM/GPRS modules: Used in wireless communication devices, mobile modems, and IoT systems that require GSM/GPRS connectivity.
• Base stations: Ideal for use in stationary equipment that needs a stable connection with mobile networks.
• Embedded systems: Great for integration into devices that require mobile data communication but need a dedicated external antenna for better range and performance.
• Outdoor applications: The screw mount and robust cable make it suitable for outdoor or industrial uses where antenna stability is important.

• Higher signal gain: The 5dBi gain ensures better signal reception and transmission over longer distances or in areas with weak signal.
• Secure installation: The screw mount provides a stable and durable connection, preventing the antenna from dislodging or being affected by vibrations.
• Flexible cable length: The 3-meter RG174 cable gives users flexibility in positioning the antenna for optimal signal strength and coverage.
• Wide compatibility: The SMA male connector is compatible with many GSM/GPRS modules, routers, and wireless communication equipment.

This GSM GPRS 5dBi Screw Mount Antenna with RG174 cable and SMA (M) straight connector is a versatile, high-performance solution for enhancing GSM/GPRS communication in various applications. Its moderate gain, secure mounting, and flexible installation options make it ideal for both indoor and outdoor use in GSM/GPRS-based systems, ensuring reliable mobile connectivity over a stable signal range.