Our Products
Saws, Chainsaws & Saw Blades
2 Products availableGrinders, Drills & Power Tools
1 Products availableRoll Forming & Bending Machines
1 Products availableGrinding Machine
1 Products availableMilling Machines
1 Products availableHydraulic Machines
1 Products availableCrusher, Shredder & Presses
1 Products availableLathe Machines
1 Products availableGrinding & Milling Tools & Machinery
1 Products availableTechnical Specification Of Leader Lathe Machine
Bed length Ft. | 4.1/2" | 8" | 6" | 10" | 12" | 14" | 16" | 18" | 20" | 22" | 24" | 30" | 36" | 40" | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Width of Bed | 12" | 14" | 16" | 18" | 20" | 22" | 24" | 26" | 28" | 30" | 32" | 36" | 40" | 48" | |
Height of Centre | 10" | 12" | 14" | 16" | 18" | 20" | 22" | 24" | 26" | 28" | 30" | 34" | 38" | 46" | |
Spindle Bore | 2.1/2" | 3" | 3" | 4- | 4- | - | 4- | 4- | 4- | 4- | 4- | 4- | 4- | 4- | |
Swing in Gap | 32" | 36" | 42" | 52" | 55" | 60" | 68" | 72" | 76" | 80" | 84" | 92" | 100" | 116" | |
Swing over Bed | 20" | 24" | 28" | 32" | 36" | 40" | 44" | 48" | 52" | 56" | 60" | 68" | 76" | 92" | |
No. of Spindle Spindle | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
Admit between Centre | 30" | 38" | 54" | 72" | 96" | 120" | 138" | 150" | 174" | 198" | 222" | 294" | 254" | 402" | |
Leading Screw Dia. | 1.1/2" | 1.1/2" | 1.1/2" | 1.1/2" | 2" | 2" | 2.1/2" | 2.1/2" | 2.1/2" | 2.1/2" | 3" | 3.1/2" | 3" | 3" | |
H.P. Required | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 5 | 7.1/2 | 10 | 15 | 20 | 25 | 25 |
Technical Data
Inches | mm | Inches | mm | Inches | mm | |
---|---|---|---|---|---|---|
Adjustability of Stroke | 18 | 459 | 26 | 663 | 30 | 765 |
Length of Ram | 39 | 995 | 52 | 1326 | 55 | 1402 |
Tool head diameter | 7-1/4 | 184 | 8Ã�½ | 217 | 8Ã�½ | 217 |
Tool head feed | 6 | 153 | 7 | 178 | 7 | 178 |
Tool holds in Tool holder | 3/4 | 19 | 7/8x13/4 | 22x43 | 7/8x13/4 | 22x3 |
Nos. of speed | 3 | 3 | 3 | 3 | 3 | 3 |
Type of belts | Vee | Vee | Vee | Vee | Vee | |
Size of table | 11x15x12 | 280x382x306 | 14x20½x14 | 357x52x357 | 15x16x24½ | 388x408x624 |
T-solts | 1/2 | 12 | 5/8 | 31-1/2 | 5/8 | 15 |
Vertical & Horizontal Traverse | 14x18 | 357x452 | 14½x32 | 368x816 | 15x32 | 382x796 |
Overall Dimension | 52x42x60 | 1326x1061x1530 | 78x48x55 | 1989x1224x1402 | 86x60x55 | 2193x1530x1402 |
Specification of Vice | 8½x21/4 x16½ | 215x58x420 | 9½x2½x22 | 242x64x561 | 9½x22 | 242x64x561 |
Weight Approximate | 1010 kgs. | 1650 kgs. | 2250 kgs. | |||
H.P. Required | 2H.P. | 3 H.P. | 5 H.P. |
MODEL | ESSKAY TP-10 | ESSKAY TP-20 | ESSKAY TP-30 | ESSKAY TP-50 | ESSKAY TP-75 | ESSKAY TP-100 | ESSKAY TP-150 | ESSKAY TP-200 | ESSKAY TP-250 | ESSKAY TP-300 |
---|---|---|---|---|---|---|---|---|---|---|
BED SIZE | 306*355 | 355*410 | 410*460 | 460*510 | 522*575 | 586*640 | 640*690 | 765*820 | 865*920 | 650*1050 |
BED TO RAM | 230 | 255 | 295 | 300 | 382 | 435 | 460 | 510 | 612 | 625 |
BOLSTER THICKNESS | 57 | 57 | 63 | 70 | 78 | 83 | 90 | 102 | 108 | 112 |
CRANK SHAFT DIA | 75 | 85 | 100 | 120 | 135 | 170 | 185 | 204 | 230 | 250 |
STROKE LENGTH | 52 | 63 | 90 | 95 | 125 | 125 | 150 | 140 | 152 | 150 |
GEAR DIA | 458 | 560 | 615 | 665 | 765 | 910 | 1020 | 1225 | 1275 | 1350 |
FLY WHEEL DIA | 535 | 665 | 765 | 841 | 920 | 1070 | 1148 | 1275 | 1326 | 1500 |
HOLE IN RAM FOR CLAMPING DIE | 25 | 28 | 32 | 38 | 45 | 51 | 56 | 56 | 63 | 63 |
FLOOR TO TOP OF BED | 625 | 625 | 652 | 652 | 663 | 663 | 690 | 715 | 715 | 800 |
NO. OF STROKES IN MINUTE | 65 | 60 | 55 | 45 | 40 | 35 | 30 | 30 | 30 | 30 |
MOTOR RPM | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 |
MOTOR POWER REQUIRED IN HP | 1 | 2 | 3 | 3 | 5 | 7.5 | 10 | 15 | 20 | 25 |
Specifications
TECHNICAL SPECIFICATION | MODEL ESSKAY BH-618 | MODEL ESSKAY BH-1024 |
---|---|---|
Maximum Table grinding WxL | 150x450 mm | 250 x 620 mm |
G leas Count of Vertical Feed Hand wheel | 0.01 mm | 0.01 mm |
Least Count of Cross Feed Hand Wheel | 0.005 mm | 0.05 mm |
Q Microfeed Movement | 0.002 mm | 0.002 mm |
Maximum Grinding Hight under Wheel | 225 mm | 250 mm |
Grinding Wheel Speed | 2800 RPM | 2800 RPM |
Grinding Wheel Size (DxWxB) | 180x13x31.75 mm | 200x20x 31.75mm |
Q Grinding Wheel Head Motor | 1 HP/3 Phase | 1.5 HP/3 Phase |
Hydraulic Pump Motor | 1 HP | 1 HP |
Q Working Pressure | 12 Kg/cm2 | 12 kg/cm 2 |
Hydraulic Tank Capacity (Telus-68) | 35 Ltrs. | 60 Ltrs. |
Net Weight | 1,100 Kgs. | 1,500 Kgs. |
Wooden Case Dimension LXDXH (In mm ) | 1050x1500x1700 | 1200x2100x1800 |
Technical Data | ESSKAY-200A |
---|---|
Cutting Capacity Round Dia. ( mm.) | 200 |
Cutting Capacity Rectangle ( mm.) | 200x200 |
Main Drive H.P. ( 1440 Rpm.) | 3 |
Hydraulic Motor H.P. ( 1440 Rpm.) | 1.0 |
Coolant Motor H.P. ( 1440 Rpm.) | 0.14 |
Cutting Speed ( m / min ) | 15-95 |
Blade Size | 3760x27x0.9 |
Floor Space Size Lx WxH mm | 200x2100x1800 |
Single Indexing Stock ( mm ) | 0 to 400 |
Multiple Indexing Stock ( mm ) | 9 times |
Band Tension | Hydraulic |
Saw Feed Control | Hydraulic |
Hydraulic Tank Capacity ( Litre ) | 70 |
Coolant Tank Capacity ( Litre ) | 30 |
Net Weight. ( approx. ) Kg. | 1400 |
Total Power H.P. | 4.14 |
Cutting Taper Accuracy, for En-8 mm / 100 mm | ±0.2 |
Cutting Length Accuracy mm / Index | ±0.2 |
Standard Accessories | Optional Accessories |
---|---|
Hydraulic Band Tension | Material Support Roller Stand |
Auto Saw frame Height Adjustment | Hydraulic Bundled Clamping |
Hydraulic Full Stroke Clamping | Infinitely Variable Speed Drive |
Stepless Cutting Feed Regulation | Chip Conveyor |
Carbide & Roller Blade Guide | Variable Vice Pressure |
Complete Hydraulic System | Multiple Indexing Attachment |
Complete Electrical System | Preset Piece Counter |
Complete Coolant System | Hydraulic Sealed Kit |
Power Driven Chip Brush | Tool Kit & Maintenance Kit |
Precise Length Setting | PLC Control System |
Hard Chrome & Ground Solid Guide Rods | Bellow / Sleeves for Columns |
Imported Self Lubricating Bearings Bush | Machine Lamp |
Fast approach of blade | Motorised Lubricating System |
Step Pulley with 'V' Belt | Infinitely variable AC frequency drive |
Split Front Vice | Power Operated Material Feed Roller Unit. |
Machine Instruction Manual | Driven Band Wheel Rotation Sensor |
1 No. Bimetal Bandsaw Blade | Machine Lamp. |
Technical Specification
ESSKAY I40B | ESSKAY I-40C | ESSKAY I-50B | ESSKAY I-50C | ESSKAY I-65B | ESSKAY 1-75B | |
---|---|---|---|---|---|---|
Drill Head | ||||||
Drilling Capacity (In steel/cast iron) | 40/50 | 40/50 | 50/60 | 50/60 | 65/75 | 75/85 |
Drilling Depth | 180 | 180 | 225 | 250 | 325 | 355 |
Taper Spindle Nose Socket | MT-4 | MT-4 | MT-5 | MT-5 | MT-5 | MT-6 |
No. of Spindle Speed/ range (RPM) | 6(55-665) | 12(56-1000) | 9(45-695) | 12(45-1000) | 12(18-810) | 12(18-810) |
No. of Spindle Feed/ Range (RPM) | 3(0.1 to 0.2) | 3(0.1 to 0.2) | 3(0.1 to 0.2) | 6(0.125 to 1.25) | 6(0.125 to 1.25) | 6(0.125 to 1.25) |
Drill Power | 1.5 KW | 2.2 KW | 2.2 KW | 3.7 KW | 3.7 KW | 5.5 KW |
Capacity | ||||||
Drilling Radius Max(A) Min.(B) | 1050 375 | 1050 375 | 1100 450 | 1300 450 | 1700 500 | 1900 500 |
Drilling Head Traverse (C) | 675 | 675 | 650 | 850 | 1200 | 1300 |
Distance Base Plate to Spindle Max(P) Min.(M) | 1000 225 | 1000 225 | 1300 225 | 1300 325 | 1500 300 | 1750 400 |
Diameter of Column Sleeve (D) | 255 | 255 | 310 | 310 | 355 | 405 |
Working Surface of The Base Plate GxH | 900x680 | 900x680 | 920x830 | 1120x830 | 1500x1020 | 1850x1160 |
Dimensions of Base Plate | ||||||
LengthxWidthxHeight (TxUxV) | 1480x700x200 | 1480x700x200 | 1585x850x200 | 1800x850x200 | 2265x1040x225 | 2650x1180x225 |
Arm Elevator Motor | 0.75 KW | 0.75 KW | 1.5 KW | 1.5 KW | 2.2 KW | 3.7 KW |
Standar Box Table (XxYxZ) | 400x350x350 | 550x420x420 | 550x420x420 | 550x420x420 | 600x500x500 | 600x500x500 |
Approximate Weight of Machine | 1700 Kgs. | 1850 Kgs. | 3000 Kgs. | 3500 Kgs. | 4800 Kgs. | 6500 Kgs. |