Essential Industrial Services

Masjid Bunder, Mumbai, Maharashtra

Molykote 1000, is the most versatile product for Antisieze from Dupont. Molykote 1000 is an antisieze compound is basically applied to Bolts, or Studs, which are subjected to high temperature, so that these can be removed effortlessly and can be reused again, even after a very long period. Applying Molykote 1000 Antiseize compound to a Bolt or Studs saves time and effort while loosening and retightening them from Flanges or other Bolted joints. Good for High load carrying capacity.

Temperature range of Molykote 1000-30Degc to +650 DegC

ContainsCopper, Graphite and White solids.

Molykote Z powder is the perfect lubricant for use as a solid lubricant. It contains MOS2 ( Molybdenum Disulphide).
Molykote Z powder can be rubbed onto Metal surfaces, where heavy load and slow speed applications are there.

Stag B Jointing compound is a high temperature sealant, used in Turbine and high temperature applications. It can be used on Threading and also on Flanges. It is dark reddish in colour. It can withstand temperatures of upto 650DegC.
If used on screwed joints, it is recommended for use on fittings with a diameter of 13-38mm (1/2 to 1, 1/2″ BSP). For fittings larger than 38mm it is advisable to incorporate hemp or Fibre reinforcement, suitably wetted with StagB, into the threads.
Stag B jointing paste is applied by Brush on surface free of Dirt, Oil and Grease. In normal circumstances StagB can be used with or without packing, in accordance with normal pipe fitting practice. However, being thermoplastic these jointings should be reinforced with Hemp or wick, when the joint is liable to extremes of temperature and pressure.

P37 Antiseize paste extremely pure. Molykote P37 is a extremely pure Antiseize paste. Contains no lead, nickel, sulfur, chlorine or fluorine. Molykote P37 is widely used in High temperature applications like Gas Turbines, where temperature range is very high, and special heat resistant steels are used. Molykote P37 does not corrode or creation abrasion to such metals, and is highly safe to be used.