Prolon 59, is a carnauba wax based mold release and maintenance systems.

• Wide coverage, easy to spread and lift, provides excellent gloss
• Excellent compatibility with a wide range of resins and gelcoats
• Capable of Multiple release per application
• Cost effective, increased productivity
• Minimizes friction, increases life of mold
• Reduction in time for mold preparation
• Less build up on mold results in extended mold maintenance cycle
• Highly versatile, can be used on all mold surfaces
• Contains no chlorinated solvents, making it environment friendly

Prolonmanufactures semi-permanent andwax based mold release and maintenance systems. Our products increase the performance of fibreglass reinforced plastic production by forming cross-linking durable coating on molds surface providing multiple releases, hence greatly improving manufacturing ease and economics.

L 455, Release Agentfor epoxies, polyester resins, thermoplastics, adhesives, and elastomeric products.

• Easy to use, optimal drying
• In most cases, a single application provides releases through numerous multiple cycles
• Provides a glossy finish to the surface
• No build-up on molds and dies
• Provides a heat stable parting film stable at temperatures exceeding most molding processes
• Lowers adhesion energy of the mold
• Highly versatile and can be used on all mold surfaces
• No interference with bonding and post finishes
• Minimizes friction and increases the life of mold
• No CFC

S 725, Mold Sealeris a high-performance liquid sealer to seal and condition the mold in fabricating plastic parts, for epoxies, melamines, methacrylates, phenolic, polyesters and polyurethanes.

• Removes porosity present on the mold
• Provides protection to mold and enhances performance of the mold release
• No build up on molds and dies
• Provides a heat stable parting film stable at temperatures exceeding most molding processes
• Highly versatile and can be used on all mold surfaces
• No CFC

CLR 500, Mold Cleaneris a proprietary solvent system to clean molds. It is a multi-purpose cleaner to remove any traces of wax, release agents, sealers and buffing compounds.

Prolonmanufactures semi-permanent andwax based mold release and maintenance systems. Our products increase the performance of fibreglass reinforced plastic production by forming cross-linking durable coating on molds surface providing multiple releases, hence greatly improving manufacturing ease and economics.

L 455, Release Agentfor epoxies, polyester resins, thermoplastics, adhesives, and elastomeric products.

• Easy to use, optimal drying
• In most cases, a single application provides releases through numerous multiple cycles
• Provides a glossy finish to the surface
• No build-up on molds and dies
• Provides a heat stable parting film stable at temperatures exceeding most molding processes
• Lowers adhesion energy of the mold
• Highly versatile and can be used on all mold surfaces
• No interference with bonding and post finishes
• Minimizes friction and increases the life of mold
• No CFC

S 725, Mold Sealeris a high-performance liquid sealer to seal and condition the mold in fabricating plastic parts, for epoxies, melamines, methacrylates, phenolic, polyesters and polyurethanes.

• Removes porosity present on the mold
• Provides protection to mold and enhances performance of the mold release
• No build up on molds and dies
• Provides a heat stable parting film stable at temperatures exceeding most molding processes
• Highly versatile and can be used on all mold surfaces
• No CFC

CLR 500, Mold Cleaneris a proprietary solvent system to clean molds. It is a multi-purpose cleaner to remove any traces of wax, release agents, sealers and buffing compounds.

RST-5 is an aqueous cleaner, which replaces solvents being used to remove uncured polyester & epoxy resins, paints, printing inks, greases, silicones and other sealants.RST-5 is a universal-cleaning agent diluted in water. It is todays most environmentally sound alternative for all who wish to strike a healthy balance between ecology and economics when it comes to cleaning surfaces and tools. RST-5 is a revolutionary soap that is:

• Free of any solvents
• Non flammable
• Easy storage or transportation as highly concentrated 1:20
• Low cost, it can be re-used and does not evaporate
• Harmless to humans and environment
• Self separating, resin particles separate from cleaner

Prolon 59, is a carnauba wax based mold release and maintenance systems.

• Wide coverage, easy to spread and lift, provides excellent gloss
• Excellent compatibility with a wide range of resins and gelcoats
• Capable of Multiple release per application
• Cost effective, increased productivity
• Minimizes friction, increases life of mold
• Reduction in time for mold preparation
• Less build up on mold results in extended mold maintenance cycle
• Highly versatile, can be used on all mold surfaces
• Contains no chlorinated solvents, making it environment friendly

Prolonmanufactures semi-permanent andwax based mold release and maintenance systems. Our products increase the performance of fibreglass reinforced plastic production by forming cross-linking durable coating on molds surface providing multiple releases, hence greatly improving manufacturing ease and economics.

L 455, Release Agentfor epoxies, polyester resins, thermoplastics, adhesives, and elastomeric products.

• Easy to use, optimal drying
• In most cases, a single application provides releases through numerous multiple cycles
• Provides a glossy finish to the surface
• No build-up on molds and dies
• Provides a heat stable parting film stable at temperatures exceeding most molding processes
• Lowers adhesion energy of the mold
• Highly versatile and can be used on all mold surfaces
• No interference with bonding and post finishes
• Minimizes friction and increases the life of mold
• No CFC

S 725, Mold Sealeris a high-performance liquid sealer to seal and condition the mold in fabricating plastic parts, for epoxies, melamines, methacrylates, phenolic, polyesters and polyurethanes.

• Removes porosity present on the mold
• Provides protection to mold and enhances performance of the mold release
• No build up on molds and dies
• Provides a heat stable parting film stable at temperatures exceeding most molding processes
• Highly versatile and can be used on all mold surfaces
• No CFC

CLR 500, Mold Cleaneris a proprietary solvent system to clean molds. It is a multi-purpose cleaner to remove any traces of wax, release agents, sealers and buffing compounds.

Prolonmanufactures semi-permanent andwax based mold release and maintenance systems. Our products increase the performance of fibreglass reinforced plastic production by forming cross-linking durable coating on molds surface providing multiple releases, hence greatly improving manufacturing ease and economics.

L 455, Release Agentfor epoxies, polyester resins, thermoplastics, adhesives, and elastomeric products.

• Easy to use, optimal drying
• In most cases, a single application provides releases through numerous multiple cycles
• Provides a glossy finish to the surface
• No build-up on molds and dies
• Provides a heat stable parting film stable at temperatures exceeding most molding processes
• Lowers adhesion energy of the mold
• Highly versatile and can be used on all mold surfaces
• No interference with bonding and post finishes
• Minimizes friction and increases the life of mold
• No CFC

S 725, Mold Sealeris a high-performance liquid sealer to seal and condition the mold in fabricating plastic parts, for epoxies, melamines, methacrylates, phenolic, polyesters and polyurethanes.

• Removes porosity present on the mold
• Provides protection to mold and enhances performance of the mold release
• No build up on molds and dies
• Provides a heat stable parting film stable at temperatures exceeding most molding processes
• Highly versatile and can be used on all mold surfaces
• No CFC

CLR 500, Mold Cleaneris a proprietary solvent system to clean molds. It is a multi-purpose cleaner to remove any traces of wax, release agents, sealers and buffing compounds.

RST-5 is an aqueous cleaner, which replaces solvents being used to remove uncured polyester & epoxy resins, paints, printing inks, greases, silicones and other sealants.RST-5 is a universal-cleaning agent diluted in water. It is todays most environmentally sound alternative for all who wish to strike a healthy balance between ecology and economics when it comes to cleaning surfaces and tools. RST-5 is a revolutionary soap that is:

• Free of any solvents
• Non flammable
• Easy storage or transportation as highly concentrated 1:20
• Low cost, it can be re-used and does not evaporate
• Harmless to humans and environment
• Self separating, resin particles separate from cleaner