Our Products
Air Vents
1 Products availablePlumbing Traps
1 Products availableSeparating Machines
1 Products availableSwivel Fittings
1 Products availableOur product range contains a wide range of Piston Valves, Inverted Bucket Steam Traps, Balanced Pressure Thermostatic Steam Traps, Inverted Bucket Steam Trap and Thermostatic Steam Traps
| |||||||||||||||||||
::Body Material :: | |||||||||||||||||||
|
Principle :: | ||||||
Inverted Bucket Steam Traps operate on difference in density between gas and liquid. Steam enters the inverted submerged bucket and it imparts buoyancy to the bucket, as a result of which, it is lifted and closes the discharge valve. When condensate enters the Trap and reaches a certain level, the weight of the bucket multiplied by leverage exceeds the differential pressure holding the valve to seat and bucket sinks and opens the valve to discharge condensate. Accumulated air, CO2 and other non-condensable gases are discharged first prior to condensate. | ||||||
::Body Material :: | ||||||
| ||||||
::End Connection :: | ||||||
| ||||||
::Options :: | ||||||
|
Series | Description | Flow | Sizes | Body Materials | End Conn | PMA |
IBH | Side Inlet Side Outlet | 1/2"- 2.1/2" | Cast Iron | Screwed/ Flanged | 250 PSI (17.5 Bar) |
|
IBH(C) | Side Inlet Side Outlet | 1/2"- 2.1/2" | Cast Steel | Screwed/ Flanged/SW | 600 PSI (42 Bar) |
|
IBH SG | Side Inlet Side Outlet | 1/2"- 2.1/2" | Ductile Iron | Screwed/ Flanged | 250 PSI (17.5 Bar) |
|
Principle :: | ||||||
Balanced Pressure Thermostatic Steam Traps operate on difference in temperature between steam and condensate. The welded stainless steel Bellow (Element) is self-adjusting over its entire range of operating pressure. This element will discharge the condensate at approx 20 C or 10 C below steam saturation temperature depending upon the type of filling filled in the Element. The Element is also resistant to water-hammer. | ||||||
::Body Material :: | ||||||
| ||||||
::End Connection :: | ||||||
|
Series | Description | Sizes | Body Materials | End Conn | PMO |
TST 300 |
Thermostatic Steam Trap with built-in strainer |
1/2"-1" | Forged Steel | Screwed/ Flanged/ SW | 300 PSI (21 Bar) |
TST-13AX | Themostatic Steam Trap with built strainer - Angle Type | 1/2"-3/4" | Brass/Gun Metal | Screwed | 225 PSI (16 Bar) |
TST-13SX | Thermostatic Steam Trap with built in strainer - Straight Type | 1/2"-3/4" | Brass/Gun Metal | Screwed | 225 PSI (16 Bar) |
Principle :: | ||||||||
Ball Float & Thermostatic Steam Traps are mechanical Traps and operate on difference in desity between steam and codensate. Condensate entering the Trap causes the Ball Float to rise and lifts the valve thru leverage off the seat discharging condensate continuously at steam temperature. Air, CO2 and other non-condensable gases are released thru separate balanced pressure type Thermostatic Air Vent provided in the Trap. | ||||||||
::Body Material :: | ||||||||
| ||||||||
::End Connection :: | ||||||||
| ||||||||
::Options :: | ||||||||
|