Write a Review
Our Products
Air Vents
1 Products availablePlumbing Traps
1 Products availableSeparating Machines
1 Products availableSwivel Fittings
1 Products availableOur product range contains a wide range of SS Inverted Bucket Trap and steam specialties
| Principle :: | ||||||||||
| SSAE Series and AEBFH air eliminators operate on difference in density between gas and liquid while TAV300 operates on difference in temperature between steam and air. SSAE and AEBFH are used for liquid and TAV300 is used for steam. | ||||||||||
| ::Body Material :: | ||||||||||
| ||||||||||
| ::End Connection :: | ||||||||||
|
|
| Principle :: | ||||||||
| SSLE Series and CABFH liquid drainers operates on difference in density between gas and liquid. | ||||||||
| ::Body Material :: | ||||||||
| ||||||||
| ::End Connection :: | ||||||||
|
| Series | Description | Flow | Sizes | Body Materials | End Conn | PMA |
| SSLE | Top Inlet Bottom Outlet | 1/2"-1" | AISI 304 | Screwed/ Flanged | 400 PSI (28 Bar) |
| Principle :: | ||||
| The flow velocity of the steam, air or gas is significantly reduced as it enters the body and a series of baffles change its flow direction several times. The relatively heavy water droplets impact on the internal baffles and are accumulated. Gravity allows the accumulated water droplets and other foreign particles to fall to the drain and removed from the system using either a steam trap, or when used on air or gas distribution system, a liquid drainer. | ||||
| ::Body Material :: | ||||
| ||||
| ::End Connection :: | ||||
|
| Series | Description | Flow | Sizes | Body Materials | End Conn | PMO |
| SP01 | Side Inlet Side Outlet | 1/2"- 1" | Cast Iron | Screwed | 13.8 Bar (200 PSI) | |
| SP02 | Side Inlet Side Outlet | 1.1/4"- 2" | Cast Iron | Screwed |
10 Bar |
|
| SP03 | Side Inlet Side Outlet | 2"- 4" | Cast Iron | Flanged | 10 Bar (145 PSI) |
|
| Salient Features :: | |
| | Simple but rugged design - minimum moving parts |
| | The long composite bearing provides adequate support to Stainless Steel Rotor to run it smooth and 'true' |
| | Better resistance against vibrations, shock and water hammering |
| | Unrestricted full flow capacity |
| | Easy repairability |
| | Available in both Monoflow and Duoflow models |
| | Standard Sizes available are 3/4" (19mm) and 1"(25mm). Other sizes available upon request |
| Description :: | ||||||||||
| XL Rotary Pressure Joints have ductile iron body and self lubricating, imperious carbon guide ring and carbon/carbon impregnated PTFE seal rings. They have accurately machined Nipple radius duly processed with ENP ensuring perfect seat with the seal ring and longer life. | ||||||||||
| ::Salient Features :: | ||||||||||
| ||||||||||
| ::Application :: | ||||||||||
| In chemical and chemical based industries on various types of Processing Machines havingdrying/heating/cooling rotating cylinders. |
| Salient Features:: | ||||||||||||||
| | Self - aligning, Self - adjusting and Self - lubricating. | |||||||||||||
| | Compact in design. | |||||||||||||
| | Suitable for working pressure upto 500 psi. | |||||||||||||
| | Available in 90 and straight body styles. | |||||||||||||
| | Ball and Nut made of Stainless Steel ASTM A 743 Gr CA40 (Investment Cast) preventing rust deposition on wearing surface. Suitable material forworking media other than steam / water could also be offered. | |||||||||||||
| | Radiuses portion of SS Nut is also available duly processed with ESCOLYTE which imparts surface hardness of 50 RC | |||||||||||||
| | Adopted as Original Equipment by renowned manufacturers of Tyre machinery and Bag-O-Matic Presses. | |||||||||||||
| | Standardised by Users of repute-Leaders in their Field. | |||||||||||||
| ::'XL' Bag -O-Matic Bladder Connection:: | ||||||||||||||
| Our common/Ball Joint Couplings Model XLBJ, normally available in 1/2" and 3/4" size, are suitable for bladder connection for Bag-O-Matic presses. Their total angular flexibility of 38 and compact design make installation in the bottom area of Bag-O-Matic press easy.
| ||||||||||||||
| Principle :: | ||||||
| Inverted Bucket Steam Traps operate on difference in density between gas and liquid. Steam enters the inverted submerged bucket and it imparts buoyancy to the bucket, as a result of which, it is lifted and closes the discharge valve. When condensate enters the Trap and reaches a certain level, the weight of the bucket multiplied by leverage exceeds the differential pressure holding the valve to seat and bucket sinks and opens the valve to discharge condensate. Accumulated air, CO2and other non-condensable gases are discharged first prior to condensate. | ||||||
| ::Body Material :: | ||||||
| ||||||
| ::End Connection :: | ||||||
| ||||||
| ::Options :: | ||||||
|
| Series | Description | Flow | Sizes | Body Materials | End Conn | PMO |
| SSIBH | Sealed Stainless Steel Steam trap having Side Inlet Side Outlet | 1/2"-1" | AISI 304 | Screwed/ Flanged/ SW | 650 PSI (45 Bar) | |
| SSIBU | Sealed Stainless Steel Steam trap Able to handle any flow direction with Universal Connector | 1/2"-1" | AISI 304 | Screwed/ Flanged/ SW | 650 PSI (45 Bar) | |
| SSIBV | Welded Stainless Steel trap having Bottom Inlet Top Outlet | 1/2"-1" | AISI 304 | Screwed/ Flanged/ SW | 650 PSI (45 Bar) |
| Description :: | ||||||||||
| SEALOK Rotary Joints satisfy the demanding requirements of the Paper, Rubber, Textile, Chemical, Plastic and Food Processing Industries, providing dependable service under extremities and even on high speed cylinders. They are available in a size range from 1/2" to 4" and are suitable for working pressures upto 150 psi. Heavier series for higher pressures is also available. | ||||||||||
| ::A Joint Witha Difference:: | ||||||||||
|
Jagdish Mashruwala (Esco Exports)
308-309, Shangrila Arcade, Nr. Shyamal Cross Road Anandnagar Road, Satellite Ahmedabad 380015 INDIA, Gujarat
Share us via
