These magnets are advantageously used to solve may welding and transportation problems. it can develop a strong magnetic power despite its rather small dimensions. If used as clamping magnet when welding steel plates, section iron, beams and heavy steel construction, time consuming alignment of the components can be saved. When preparing profiles or sheets for welding, the magnet is put on the parting line. After current is switched ON, the magnet pulls both components on the same level so that an exact welding operation can be performed. Cross joints and connection plates are firmly held for convenient welding, marking and drilling. By eliminating slings, some advantages are in fact attained, such as quick lifting of some pieces difficult to be reached, direct and precise positioning of the pieces to be worked, automatic feeding of the machines, the handling of some parts which are not easily lifted mechanically or which could be damaged by the use of chains or other tools. To satisfy the above mentioned needs, we have engineered the ERICH ELECTROMAGNETIC LIFTERS (ELM) set consisting of: --superior class "H" insulated moisture proof excitation copper coils. ----strong outer frame of pure iron. The Electromagnets are supplied ready for service including Rectifier, ON -OFF switch, fuse, indicating lamp, cable and crane eye bolt. It is generally designed for 220 Volt AC Single Phase 50 Hz. On request it may be supplied for different voltages.

Clean tramp iron, machine chips, nails, bolts, etc. from factory aisles, machine shop, parking lots, quickly and easily. They are light in weight and highly Manu arable and operate at normal walking speed. Used In :

• Factory aisles
• Machine shop
• Drive ways airports
• Parking lots
• Flat space
• Indoors or out

Attributes :

• Light in weight
• Highly maneuverable
• Operate at normal walking speed
• Available in 5 different sweeping widths :
  • 300 mm
  • 450 mm
  • 600 mm
  • 750 mm
  • 900mm
  • floor cleaning 50 mm
• Handle and two rubber roller bearing wheels
• Sweeping from 1200 mm to 2400 mm

Variety :

• Trailers Models
• Fork lift models
• Heavy Duty Trailing models

We are in the business of manufacturing, exporting and supplying highly efficient Magnetic Sweepers. Easily and quickly clean-up tramp iron from factory aisles, machine shop, driveways, parking lots or any flat surface indoors or out with the help of our ERICH model-SRD permanent magnetic floor sweepers. Our Magnetic Sweepers are helpful in removing machining chips, nails, staples, wire and all sorts of dangerous tramp iron.

We manufacture, export and supply excellent quality and efficient Magnetic Sheet Floaters. These are faster and much safer alternative for handling stacks of sheet stock. Our Erich Permanent Magnetic Sheet Floaters provide a constant, powerful magnetic force that automatically fans sheets apart without causing any risk of electrical hazards. The machine operators and robotic arms can safely remove one sheet at a time, thus eliminating the chance of jamming or damaging the machinery.

Our Magnetic Sheet Floaters consist of a stainless steel casing with an anisotropic magnet system installed inside. The casing and the magnets are held in position with a steel back plate. Each unit can be mounted on the workplace or can be free standing. Choosing the right floater depends on the various factors such as thickness of the sheet, dimensions of the sheet, height of the pile, surface quality of the sheet, sheet conditions, etc. The floater must be higher than the pile of sheets in order to achieve the correct separation. These floaters are available in various sizes and magnetic strength. We also design and manufacture as per customer’s specific requirement.

We are offering magnetic base, v block. we bring forth premium quality magnetic base & v block that is widely demanded by the clients for their smooth and easy operation. Our magnetic base & v block possesses various attributes which makes it popular amidst the customers. attributes :high quality dial gauge indicator holderenergized base and two sideseasy gripping of flat surface and round surfacespush button control turning on and offscriber can be fitted in place of dial indicatorregulator type on and off systemthree magnetic surfacesfirm holdtop and bottom with 90 'v' angleend surface opposite to switchused in :tool rooms for drillinggrinding of round jobs

Erich Plate Type De-magnetizers are ideal for tool room use to effectively remove surface residual magnetism from high speed steel, carbon steel, die steel, cutting tools, drills, taps etc. Attributes :

• Ideal for tool room
• Effectively remove surface residual magnetism
• Aperture / tunnel type Demagnetizer
• Negligible current consumption
• Operated from any normal socket outlet of 220 volts A.C mains

Used For :

• High Speed Steel
• Spring Steel
• Die Steel etc.
• Demagnetizing a workplace
• Material of very small to very large Dimensions

Standard Sizes :

• W- 41/2 x 6"
• W-a" 6"
• W-41/2" x 12"

Owing to our rich industry experience, we are counted among the preeminent Manufacturers, Suppliers and Exporters of Rectangular Lifting Electromagnets from Delhi. The Rectangular Lifting Electromagnets we make available are manufactured in adherence with set industrial norms. We maintain a large stock of the Lifting Electromagnets in our spacious warehouse, to cater the bulk and urgent requirements of the buyers. One can obtain the Magnets at nominal rates.

 

Attributes

• Powerful
• Range of sizes from diameter 25mm to 145mm. and 6, 12, 24 and 48 V DC.
• Optimum performance
• Used with Erich armature plates
• Suitable for holding any smooth ferrous surface of adequate thickness
• Zinc plated magnet body
• Armature plates
• Magnets mounted on rear face
• Center tapped holes or 3 tapped holes on PCD

Applications

• Holding/ energizing or releasing / de-energized
• Machine mechanisms
• Door guard locking
• Electrical connection by free leads
• Non magnetic shim between magnet and armature

We are instrumental in manufacturing, exporting and supplying of Magnetic Coolant Cleaners. The Magnetic Coolant Cleaners we deal in are appreciated by various industry experts, owing to the excellent features. We make sure that the Magnetic Coolant Cleaners meet the customers’ satisfaction level thus we use cutting edge technology and optimum raw material. We have excellent logistics facilities available for timely delivery of Magnetic Coolant Cleaners.

 

Attributes :

• Continuous cleaning magnetic separator
• Removes ferrous material from the coolant flow
• Deposits it into a disposable bin
• Remove fine ferrous chips
• Grindings from machine coolant systems
• Ensures improved life of coolant
• Capacity from 50 to 1000 liters per minute

We are one of the most reliable and preferred names in the industry. We have been catering to the diverse requirements of the customers by offering premium-grade and quality assured Demagnetizer and that too at the most competitive prices. Excellent and ultra-modern production facilities help us in delivering the engineer precision Demagnetizer. Our Erich Plate Type Demagnetizers are ideal for tool room use as they effectively remove surface residual magnetism from high speed steel, spring steel, die steel, etc. Before the final dispatch, we test the Demagnetizer on various quality parameters. To demagnetize a workplace (whatever be its length) slide it slowly across the top plate at a low and constant speed or by moving it away from the center of the tunnel where the filed at a maximum. Aperture or tunnel type demagnetizer is suitable for demagnetization of material of very small to very large dimensions. Thick object may be de-magnetized by applying both ends to the demagnetizers. The current consumption is negligible and the unit can be operated from any normal socket outlet of 220 volts A.C 50 Hz. mains.

 

Attributes :

• Ideal for tool room
• Effectively remove surface residual magnetism
• Aperture / tunnel type Demagnetizer
• Negligible current consumption
• Operated from any normal socket outlet of 220 volts A.C mains

Used For :

• High Speed Steel
• Spring Steel
• Die Steel etc.
• Demagnetizing a workplace
• Material of very small to very large Dimensions

Highly acclaimed for its long lasting magnetic power, our Permanent Magnetic Drums are an integral part of processing drums. We are a well-known Manufacturer, Supplier and Exporter of Permanent Magnetic Drums from Delhi. Erich Permanent Magnetic Drum Type Separator is most useful for separating tramp iron from non-magnetic material possessed in bulk quantity, for the purity of end products, recovery of metal having commercial value and protection of processing plant and machinery. Buyers are free to place bulk orders of the Magnetic Drums with us and expect their timely delivery.

These drums are widely used in all processing industry for separation of iron contamination from minerals, chemicals, food, flour, plastics, grains, sand, cement, fertilizers, abrasives, glass, slag, ores, rock, refractory and many other products. Our drums are available in diameters ranging from 200 to 1000mm and length from 200 to 2000mm. Our drums are made using permanent magnets, which are long lasting in quality and ensure longer functional life. The power of these permanent magnets does not reduce during normal use. Volume of material that can be handled by these drums depends up on the diameter and length of the drum.

We are Delhi (India)-based Manufacturer, Exporter and Supplier of Magnetic Funnel Filters. We have ultra modern production facilities; well-equipped with the latest machines and technology. This helps us in bringing forth the qualitative range of Magnetic Funnel Filters, accessible from us at the market-leading prices. We test the Funnel Filters on the grounds of quality, durability and design. We deliver the Magnetic Funnel Filters, as we have excellent transportation facilities.

 

Qualities :

• Uniform flow
• Easily removable magnetic assemblies
• Easily cleaned
• Specially designed for ceramic slurries and glazes
• Separate fine iron particles, scales etc

Available in :

• Ferrite
• Alnica
• High power
• Rare – earth magnets
• Complete stainless steel 304 construction

Lifting Electromagnet that we offer are ideal to be used in machine mechanisms, door guard locking and applications with remote hold/release requirement. Erich Small Electro Magnets are very useful machine mechanism that is used for door guard locking, automation, remote hold or release requirements. We offer Lifting Electromagnet in a range of sizes and voltage for holding or energizing as well as releasing or de-energised. It provides optimum performance when used with Erich armature plates (available separately) but suitable for holding any smooth ferrous surface of adequate thickness. It provides electrical connection by free leads. Coils are continuously rated at the specified supply voltage, AC or DC. It has zinc plated magnet body and armature plates. Magnets are mounted on rear face by center tapped holes or 3 tapped holes on PCD. Remanence (approx. 5% of holding force) may be reduced by fitting nonmagnetic shim between magnet and armature.

 

Details :

• Erich Small Electro Magnets are very useful machine mechanism, door guard locking, automation, remote hold / release requirement.
• Erich Powerful Electro-magnets in a range of sizes and voltage for holding/ energizing or releasing/ de-energised. Ideal for use in machine mechanisms, door guard locking and applications with remote hold/release requirement.
• Optimum performance when used with Erich armature plates (available separately) but suitable for holding any smooth ferrous surface of adequate thickness. Electrical connection by free leads. Coils are continuously rated at the specified supply voltage, AC or dC.
• Zinc plated magnet body and armature plates. Magnets mounted on rear face by center tapped holes or 3 tapped holes on PCD. Remanence (approx. 5% of holding force) may be reduced by fitting non magnetic shim between magnet and armature.

The best choice for welding purpose and workshop use, our Electromagnetic Lifters and Positions are manufactured in sync with set industrial norms.  The company is a trusted Manufacturer, Supplier and Exporter of Electromagnetic Lifters and Positions from Delhi. Our Electromagnetic Lifters and Positions are available with and without rectifier. Strict quality-tests ensure that only defect-free products reach the buyers. We hold the expertise of delivering bulk orders of the Lifters and Positions within the allocated time.

 

Features

• Available with or without rectifier.
• Perfect for workshop use and welding purpose
• Diameters from 100 mm to 500 mm
• Available for AC and DC power source

We are the renowned Manufacturer, Exporter and Supplier of high performance Permanent Magnetic Pulley. Our ERICH Permanent Magnetic Pulleys separators are typically installed as head pulleys in conveyor systems. They provide effective, automatic and continuous removal of tramp iron from a material flow. Our pulley is used in industries such as waste recovery, mining, foundry, coal, stone crushing and bulk material processing. Erich Magnetic pulleys improve product’s purity and protect costly equipment from metal damage.

 

Operation : As the belt conveyed product travels over the magnetic head pulley, any ferrous metal that is mixed in the product is attracted and held firmly on the belt until it reaches the underside of the magnetic pulley where it passes out of the magnetic field and is discharged separately into a chute/bin from the conveyed product which continues on its normal trajectory. Erich Magnetic Pulleys are supplied complete with shaft for ease of installation, where conveyor is alreadyexist, shaft details can be machined to suit.

Features :

• Continuously, self cleaning when belt is running.
• Removable Grade EN-8 steel shaft ( stainless steel shaft optional).
• Stainless steel 304 outer shell ensures longer life.
• Powerful Axial magnetic circuit design (Radial pole Magnetic circuit as per request).
• Quick and easy to install.
• Totally maintenance free, no costly power supply, no running cost.
• Custom built units available upon request.
• Erich Magnetic Pulley sizes available from 151mm (6”) up to 1000mm (40”) diameters and width up to 2000mm ( 80”).
• Guarantee on magnetic performance.

Electromagnetic Drums that we manufacture, export and supply are widely in demand amongst buyers. Our Permanent Magnetic Drum Separators are essential in processing industry and are widely used for the separation of iron contamination from minerals, chemicals, food, flour, sugar, grains, plastics, sand, cement, fertilizers, rock, boring and many other gravity or conveyer transported product. Buyers can obtain our Electromagnetic Drums at market leading rates from us.

Our Electromagnetic Pulley is the best choice for efficient removal of tramp iron.  We are a renowned Manufacturer, Supplier and Exporter of Electromagnetic Pulleys from Delhi. The Electromagnetic Pulleys we make available are manufactured using the finest quality components and advanced technology. Buyers are free to place bulk orders of the Electromagnetic Pulleys with us and we ensure their timely execution. Buyers can obtain the Pulley at reasonable rates from us.

 

Availability and Composition

• These are built up with disc poles of high permeability steel between which coils are mounted. The coils are covered by non-magnetic covers. One end of the shaft carries slip rings for supply of current, while the other end which is provided with key-way, can be fitted to the customers driving mechanism.
• Coils made from aluminum or copper wires or strips with class “H” insulation
• Direct current usually 110V or 220V
• Diameters from 250 to 1500mm
• Length up to 2000mm

We have established ourselves as prominent Manufacturers, Exporters and Suppliers of the Electromagnetic Drill Stand. We deal in tested, certified, precisely designed and developed Electromagnetic Drill Stand. The offered Electromagnetic Drill Stand is manufactured using sophisticated machines and latest technology. Before final dispatch, our dexterous team members test and examine the Electromagnetic Drill Stand on quality parameters such as durability, performance and design.

 

Features :

• Strong magnet base
• Forged from special steel
• Holds the drilling unit safely
• Easily readable position scale and pointer
• Quick drilling of holes to an accurate depth
• Swivel positioner
• Turning radius of 330^o
• Precision alignment at the bit or tap
• Safety chain in the case of power cut

Used for :

• Close tolerance drilling
• Tapping
• Reaming in vertical, horizontal or over head positions

Electromagnetic Pulley Electromagnetic Pulley Electromagnetic Pulley Electromagnetic Pulley

These magnets are advantageously used to solve may welding and transportation problems. it can develop a strong magnetic power despite its rather small dimensions. If used as clamping magnet when welding steel plates, section iron, beams and heavy steel construction, time consuming alignment of the components can be saved. When preparing profiles or sheets for welding, the magnet is put on the parting line. After current is switched ON, the magnet pulls both components on the same level so that an exact welding operation can be performed. Cross joints and connection plates are firmly held for convenient welding, marking and drilling. By eliminating slings, some advantages are in fact attained, such as quick lifting of some pieces difficult to be reached, direct and precise positioning of the pieces to be worked, automatic feeding of the machines, the handling of some parts which are not easily lifted mechanically or which could be damaged by the use of chains or other tools. To satisfy the above mentioned needs, we have engineered the ERICH ELECTROMAGNETIC LIFTERS (ELM) set consisting of: --superior class "H" insulated moisture proof excitation copper coils. ----strong outer frame of pure iron. The Electromagnets are supplied ready for service including Rectifier, ON -OFF switch, fuse, indicating lamp, cable and crane eye bolt. It is generally designed for 220 Volt AC Single Phase 50 Hz. On request it may be supplied for different voltages.

Clean tramp iron, machine chips, nails, bolts, etc. from factory aisles, machine shop, parking lots, quickly and easily. They are light in weight and highly Manu arable and operate at normal walking speed. Used In :

• Factory aisles
• Machine shop
• Drive ways airports
• Parking lots
• Flat space
• Indoors or out

Attributes :

• Light in weight
• Highly maneuverable
• Operate at normal walking speed
• Available in 5 different sweeping widths :
  • 300 mm
  • 450 mm
  • 600 mm
  • 750 mm
  • 900mm
  • floor cleaning 50 mm
• Handle and two rubber roller bearing wheels
• Sweeping from 1200 mm to 2400 mm

Variety :

• Trailers Models
• Fork lift models
• Heavy Duty Trailing models

We are in the business of manufacturing, exporting and supplying highly efficient Magnetic Sweepers. Easily and quickly clean-up tramp iron from factory aisles, machine shop, driveways, parking lots or any flat surface indoors or out with the help of our ERICH model-SRD permanent magnetic floor sweepers. Our Magnetic Sweepers are helpful in removing machining chips, nails, staples, wire and all sorts of dangerous tramp iron.

We manufacture, export and supply excellent quality and efficient Magnetic Sheet Floaters. These are faster and much safer alternative for handling stacks of sheet stock. Our Erich Permanent Magnetic Sheet Floaters provide a constant, powerful magnetic force that automatically fans sheets apart without causing any risk of electrical hazards. The machine operators and robotic arms can safely remove one sheet at a time, thus eliminating the chance of jamming or damaging the machinery.

Our Magnetic Sheet Floaters consist of a stainless steel casing with an anisotropic magnet system installed inside. The casing and the magnets are held in position with a steel back plate. Each unit can be mounted on the workplace or can be free standing. Choosing the right floater depends on the various factors such as thickness of the sheet, dimensions of the sheet, height of the pile, surface quality of the sheet, sheet conditions, etc. The floater must be higher than the pile of sheets in order to achieve the correct separation. These floaters are available in various sizes and magnetic strength. We also design and manufacture as per customer’s specific requirement.

We are offering magnetic base, v block. we bring forth premium quality magnetic base & v block that is widely demanded by the clients for their smooth and easy operation. Our magnetic base & v block possesses various attributes which makes it popular amidst the customers. attributes :high quality dial gauge indicator holderenergized base and two sideseasy gripping of flat surface and round surfacespush button control turning on and offscriber can be fitted in place of dial indicatorregulator type on and off systemthree magnetic surfacesfirm holdtop and bottom with 90 'v' angleend surface opposite to switchused in :tool rooms for drillinggrinding of round jobs

Erich Plate Type De-magnetizers are ideal for tool room use to effectively remove surface residual magnetism from high speed steel, carbon steel, die steel, cutting tools, drills, taps etc. Attributes :

• Ideal for tool room
• Effectively remove surface residual magnetism
• Aperture / tunnel type Demagnetizer
• Negligible current consumption
• Operated from any normal socket outlet of 220 volts A.C mains

Used For :

• High Speed Steel
• Spring Steel
• Die Steel etc.
• Demagnetizing a workplace
• Material of very small to very large Dimensions

Standard Sizes :

• W- 41/2 x 6"
• W-a" 6"
• W-41/2" x 12"

Owing to our rich industry experience, we are counted among the preeminent Manufacturers, Suppliers and Exporters of Rectangular Lifting Electromagnets from Delhi. The Rectangular Lifting Electromagnets we make available are manufactured in adherence with set industrial norms. We maintain a large stock of the Lifting Electromagnets in our spacious warehouse, to cater the bulk and urgent requirements of the buyers. One can obtain the Magnets at nominal rates.

 

Attributes

• Powerful
• Range of sizes from diameter 25mm to 145mm. and 6, 12, 24 and 48 V DC.
• Optimum performance
• Used with Erich armature plates
• Suitable for holding any smooth ferrous surface of adequate thickness
• Zinc plated magnet body
• Armature plates
• Magnets mounted on rear face
• Center tapped holes or 3 tapped holes on PCD

Applications

• Holding/ energizing or releasing / de-energized
• Machine mechanisms
• Door guard locking
• Electrical connection by free leads
• Non magnetic shim between magnet and armature

We are instrumental in manufacturing, exporting and supplying of Magnetic Coolant Cleaners. The Magnetic Coolant Cleaners we deal in are appreciated by various industry experts, owing to the excellent features. We make sure that the Magnetic Coolant Cleaners meet the customers’ satisfaction level thus we use cutting edge technology and optimum raw material. We have excellent logistics facilities available for timely delivery of Magnetic Coolant Cleaners.

 

Attributes :

• Continuous cleaning magnetic separator
• Removes ferrous material from the coolant flow
• Deposits it into a disposable bin
• Remove fine ferrous chips
• Grindings from machine coolant systems
• Ensures improved life of coolant
• Capacity from 50 to 1000 liters per minute

We are one of the most reliable and preferred names in the industry. We have been catering to the diverse requirements of the customers by offering premium-grade and quality assured Demagnetizer and that too at the most competitive prices. Excellent and ultra-modern production facilities help us in delivering the engineer precision Demagnetizer. Our Erich Plate Type Demagnetizers are ideal for tool room use as they effectively remove surface residual magnetism from high speed steel, spring steel, die steel, etc. Before the final dispatch, we test the Demagnetizer on various quality parameters. To demagnetize a workplace (whatever be its length) slide it slowly across the top plate at a low and constant speed or by moving it away from the center of the tunnel where the filed at a maximum. Aperture or tunnel type demagnetizer is suitable for demagnetization of material of very small to very large dimensions. Thick object may be de-magnetized by applying both ends to the demagnetizers. The current consumption is negligible and the unit can be operated from any normal socket outlet of 220 volts A.C 50 Hz. mains.

 

Attributes :

• Ideal for tool room
• Effectively remove surface residual magnetism
• Aperture / tunnel type Demagnetizer
• Negligible current consumption
• Operated from any normal socket outlet of 220 volts A.C mains

Used For :

• High Speed Steel
• Spring Steel
• Die Steel etc.
• Demagnetizing a workplace
• Material of very small to very large Dimensions

Highly acclaimed for its long lasting magnetic power, our Permanent Magnetic Drums are an integral part of processing drums. We are a well-known Manufacturer, Supplier and Exporter of Permanent Magnetic Drums from Delhi. Erich Permanent Magnetic Drum Type Separator is most useful for separating tramp iron from non-magnetic material possessed in bulk quantity, for the purity of end products, recovery of metal having commercial value and protection of processing plant and machinery. Buyers are free to place bulk orders of the Magnetic Drums with us and expect their timely delivery.

These drums are widely used in all processing industry for separation of iron contamination from minerals, chemicals, food, flour, plastics, grains, sand, cement, fertilizers, abrasives, glass, slag, ores, rock, refractory and many other products. Our drums are available in diameters ranging from 200 to 1000mm and length from 200 to 2000mm. Our drums are made using permanent magnets, which are long lasting in quality and ensure longer functional life. The power of these permanent magnets does not reduce during normal use. Volume of material that can be handled by these drums depends up on the diameter and length of the drum.

We are Delhi (India)-based Manufacturer, Exporter and Supplier of Magnetic Funnel Filters. We have ultra modern production facilities; well-equipped with the latest machines and technology. This helps us in bringing forth the qualitative range of Magnetic Funnel Filters, accessible from us at the market-leading prices. We test the Funnel Filters on the grounds of quality, durability and design. We deliver the Magnetic Funnel Filters, as we have excellent transportation facilities.

 

Qualities :

• Uniform flow
• Easily removable magnetic assemblies
• Easily cleaned
• Specially designed for ceramic slurries and glazes
• Separate fine iron particles, scales etc

Available in :

• Ferrite
• Alnica
• High power
• Rare – earth magnets
• Complete stainless steel 304 construction

Lifting Electromagnet that we offer are ideal to be used in machine mechanisms, door guard locking and applications with remote hold/release requirement. Erich Small Electro Magnets are very useful machine mechanism that is used for door guard locking, automation, remote hold or release requirements. We offer Lifting Electromagnet in a range of sizes and voltage for holding or energizing as well as releasing or de-energised. It provides optimum performance when used with Erich armature plates (available separately) but suitable for holding any smooth ferrous surface of adequate thickness. It provides electrical connection by free leads. Coils are continuously rated at the specified supply voltage, AC or DC. It has zinc plated magnet body and armature plates. Magnets are mounted on rear face by center tapped holes or 3 tapped holes on PCD. Remanence (approx. 5% of holding force) may be reduced by fitting nonmagnetic shim between magnet and armature.

 

Details :

• Erich Small Electro Magnets are very useful machine mechanism, door guard locking, automation, remote hold / release requirement.
• Erich Powerful Electro-magnets in a range of sizes and voltage for holding/ energizing or releasing/ de-energised. Ideal for use in machine mechanisms, door guard locking and applications with remote hold/release requirement.
• Optimum performance when used with Erich armature plates (available separately) but suitable for holding any smooth ferrous surface of adequate thickness. Electrical connection by free leads. Coils are continuously rated at the specified supply voltage, AC or dC.
• Zinc plated magnet body and armature plates. Magnets mounted on rear face by center tapped holes or 3 tapped holes on PCD. Remanence (approx. 5% of holding force) may be reduced by fitting non magnetic shim between magnet and armature.

The best choice for welding purpose and workshop use, our Electromagnetic Lifters and Positions are manufactured in sync with set industrial norms.  The company is a trusted Manufacturer, Supplier and Exporter of Electromagnetic Lifters and Positions from Delhi. Our Electromagnetic Lifters and Positions are available with and without rectifier. Strict quality-tests ensure that only defect-free products reach the buyers. We hold the expertise of delivering bulk orders of the Lifters and Positions within the allocated time.

 

Features

• Available with or without rectifier.
• Perfect for workshop use and welding purpose
• Diameters from 100 mm to 500 mm
• Available for AC and DC power source

We are the renowned Manufacturer, Exporter and Supplier of high performance Permanent Magnetic Pulley. Our ERICH Permanent Magnetic Pulleys separators are typically installed as head pulleys in conveyor systems. They provide effective, automatic and continuous removal of tramp iron from a material flow. Our pulley is used in industries such as waste recovery, mining, foundry, coal, stone crushing and bulk material processing. Erich Magnetic pulleys improve product’s purity and protect costly equipment from metal damage.

 

Operation : As the belt conveyed product travels over the magnetic head pulley, any ferrous metal that is mixed in the product is attracted and held firmly on the belt until it reaches the underside of the magnetic pulley where it passes out of the magnetic field and is discharged separately into a chute/bin from the conveyed product which continues on its normal trajectory. Erich Magnetic Pulleys are supplied complete with shaft for ease of installation, where conveyor is alreadyexist, shaft details can be machined to suit.

Features :

• Continuously, self cleaning when belt is running.
• Removable Grade EN-8 steel shaft ( stainless steel shaft optional).
• Stainless steel 304 outer shell ensures longer life.
• Powerful Axial magnetic circuit design (Radial pole Magnetic circuit as per request).
• Quick and easy to install.
• Totally maintenance free, no costly power supply, no running cost.
• Custom built units available upon request.
• Erich Magnetic Pulley sizes available from 151mm (6”) up to 1000mm (40”) diameters and width up to 2000mm ( 80”).
• Guarantee on magnetic performance.

Electromagnetic Drums that we manufacture, export and supply are widely in demand amongst buyers. Our Permanent Magnetic Drum Separators are essential in processing industry and are widely used for the separation of iron contamination from minerals, chemicals, food, flour, sugar, grains, plastics, sand, cement, fertilizers, rock, boring and many other gravity or conveyer transported product. Buyers can obtain our Electromagnetic Drums at market leading rates from us.

Our Electromagnetic Pulley is the best choice for efficient removal of tramp iron.  We are a renowned Manufacturer, Supplier and Exporter of Electromagnetic Pulleys from Delhi. The Electromagnetic Pulleys we make available are manufactured using the finest quality components and advanced technology. Buyers are free to place bulk orders of the Electromagnetic Pulleys with us and we ensure their timely execution. Buyers can obtain the Pulley at reasonable rates from us.

 

Availability and Composition

• These are built up with disc poles of high permeability steel between which coils are mounted. The coils are covered by non-magnetic covers. One end of the shaft carries slip rings for supply of current, while the other end which is provided with key-way, can be fitted to the customers driving mechanism.
• Coils made from aluminum or copper wires or strips with class “H” insulation
• Direct current usually 110V or 220V
• Diameters from 250 to 1500mm
• Length up to 2000mm

We have established ourselves as prominent Manufacturers, Exporters and Suppliers of the Electromagnetic Drill Stand. We deal in tested, certified, precisely designed and developed Electromagnetic Drill Stand. The offered Electromagnetic Drill Stand is manufactured using sophisticated machines and latest technology. Before final dispatch, our dexterous team members test and examine the Electromagnetic Drill Stand on quality parameters such as durability, performance and design.

 

Features :

• Strong magnet base
• Forged from special steel
• Holds the drilling unit safely
• Easily readable position scale and pointer
• Quick drilling of holes to an accurate depth
• Swivel positioner
• Turning radius of 330^o
• Precision alignment at the bit or tap
• Safety chain in the case of power cut

Used for :

• Close tolerance drilling
• Tapping
• Reaming in vertical, horizontal or over head positions

Electromagnetic Pulley Electromagnetic Pulley Electromagnetic Pulley Electromagnetic Pulley