Erich Magnetics

Patparganj, Delhi

We are involved in manufacturing, exporting and supplying of heavy-duty Circular Lifting Magnet. It is extremely convenient and economical. It is used for handling different kinds of scrap such as pig-iron, steel turnings, ingots, slab, cut-pieces of plates, channel beams, etc. The lifting capacity of the magnet depends upon the size of the magnet, shape and size and typical bulk density of scrap material, and various other factors. We make available Circular Lifting Magnet at very affordable rates.

 

Magnet Body : The Magnet body is designed so as to generate optimum magnetic field and at the same time to provide the most efficient magnetic circuit, keeping the magnet weight to the minimum, without loss of performance making these magnets most suitable for attaching to the mobile cranes in the scrap yard. The magnet body is fabricated from high permeability low carbon steel for minimum leakage and maximum magnetic lifting & holding efficiency with utmost toughness. Heat treated fully annealed centre pole, integrated outer pole, terminal box, and extra heavy duty lifting lugs are parts of the magnet body.

 

Center Pole : This is cast from high permeability low carbon steel for minimum leakage and maximum lifting capacity.

 

Coil : The coil is of Copper or Aluminium material and is designed for 'H' class insulation. The coil is insulated from the body by high quality epoxy compound having excellent thermal properties so as to withstand high temperatures.

 

Magnet Chain : The standard 3 legged alloy steel chains for maximum safety and life with common bull ring has been designed to suit all normal duty loads as well as for extra heavy lifting such as slab handling is provided.

 

Duty Cycle : The permissible relative duty cycle is 70%/ 10 minutes i.e. 7 minutes ON and 3 minutes OFF in 10 minutes.

 

Erich Circular lifting magnets are available in 3 Models : Light Duty, Heavy Duty and Extra Heavy Duty and diameters from 400mm to 2200mm.

 

Magnet Accessories : Cable Reeling Drum: ERICH make spring operated CRD'S which find wide application in supplying power to the lifting magnets. The selection of the CRD'S depends on the magnet KW and height of lift. These CRD'S are provided with slip rings and carbon brush with holder of adequate rating.

We are the renowned Manufacturer, Exporter & Supplier of high performance Permanent Lifting Magnet. The magnets that we offer are powerful and tested to hold over three times the rated load for maximum safety. Our Permanent Lifting Magnet helps in eliminating the dangerous straps and slings. Permanent Lifting Magnet that we offer ensures continuous and complete magnetic power, even after years of intensive use.

 

Application : Compact Permanent Lifting magnets, turned ON and OFF manually by a lever, provide smooth operation for hundreds of lifting and positioning applications. The ERICH Permanent Lift Magnets are ideally suited for in plant handling, loading and unloading of machine tools, in machine shops, plastic moulds, machined components, etc.

 

Features :

• Powerful magnets tested to hold over three times the rated load for maximum safety.
• Eliminates dangerous straps and slings.
• No electricity needed, no batteries to recharge or replace don’t threaten safety.
• Guarantees a continuous, complete magnetic power, even after years of intensive use.
• Available with ‘V’ face for pipes, rods and other hard-to-handle shapes. Withstand temperature up to 80^odegree C.

Powerful Erich Small Electro Magnets that is used in varied applications. Ideal for use in machine mechanisms, automation, applications with remote hold/release requirement. AttributesPowerfulRange of sizes from diameter 25mm to 145mm. and 6, 12, 24 and 48 V DC.Optimum performanceUsed with Erich armature platesSuitable for holding any smooth ferrous surface of adequate thicknessZinc plated magnet bodyArmature platesMagnets mounted on rear faceCenter tapped holes or 3 tapped holes on PCDApplicationsHolding/ energizing or releasing / de-energizedMachine mechanismsDoor guard lockingElectrical connection by free leadsNon magnetic shim between magnet and armature

We are offering permanent suspended magnets. Erich permanent suspended magnets are widely used for removal of tramp iron from raw or finished material carrying over a belt conveyor of considerable depth but relatively small percentage of tramp iron. Since a suspension magnet needs to be cleaned periodically, it is used in installation which affords access to the magnet area. If the percentage of iron is high erich (self cleaning) over band magnetic separators should be installed. The obms is basically consists of a belt conveyor into which is fitted a suspension magnet. The trapped iron remains on the belt surface which takes it beyond magnetic path and discharge it into a chute. attributesuseful to remove undesired metaleffective on dry or wet, fine or coarse materialmaintenance freeno requirement of power source.

Making available the highly durable, efficient and cost effective Permanent Plate Magnets; we are one of the prominent Manufacturers, Exporters and Suppliers of the same. With the help of sophisticated technology and ultra-modern machines, we are capable of bringing forth the precisely manufactured Permanent Plate Magnets. These magnets provide a powerful, dependable and economical protection against the danger of fine iron and tramp iron damage in processing lines. Our dexterous team members test the Permanent Plate Magnets on various quality parameters so as to ensure the proper manufacturing. Our Permanent Plate Magnets can be installed in chutes, spouts, ducts, feed table and housings as well as in suspension over non-magnetic screens, conveyors, etc.

 

Installed In

• Spouts
• Ducts
• Feed table
• Housings
• Suspension over non-magnetic screens, chutes, conveyors etc.

 

Available in

• Three magnetic strengths
• Sizes from 4 to 60 inches (102 to 1524 mm) width.
• Stainless steel side and face with two stepped poles, only back is Milled steel
• Whole stainless magnetic poles construction also available.
• Available in tow types i.e. Ferrite and high power rare earth magnetic materials

Known for its weatherproof construction, our Rectangular Lifting Magnets are used for handling sheets, plates, rounds or square bars, bundles, billets and ingots. We are an eminent Manufacturer, Supplier and Exporter of Lifting Magnets from Delhi. To cater the bulk and urgent requirements of the buyers, we maintain a large stock of the Lifting Magnets in our state-of-the-art warehouse. One can obtain the Lifting Magnets at affordable rates from us.

We are the known Manufacturer, Exporter & Supplier of high quality Permanent Suspension Magnets. These magnets automatically remove large amounts of ferrous from non–ferrous materials conveyed in heavy burden depths present on almost any type of conveyor or chute. Made from high-grade materials, our Permanent Suspension Magnets are appreciated for their minimum operating cost, minimum maintenance cost, simple installation and uninterrupted magnetic protection.

 

Features :

• No operating cost
• No electrical maintenance
• No costly shutdowns
• Simple installation
• Uninterrupted magnetic protection

We are offering suspension magnets. Erich suspension magnets either permanent or electromagnetic are used to separate tramp iron from raw or finished non-magnetic materials conveyed on conveyors. As the product on a conveyor belt flows under the powerful magnetic field, ferrous material is pulled out of the product flow and held to the face of the magnet. featuresremove damaging tramp metal fromflow of coallimestonesandgravelwood productsrecycled materials self- cleaning models / over band magnetic separators (obms)heavy duty cleated beltcarries the collected metal outside of the magnetic field.

We are offering small electro magnet. We are into dealing with high grade small electro magnet that is used in varied applications related to mechanical work. Our small electro magnet helps in various types of welding, painting, fixtures and clamping applications.