Owing to deep industry knowledge and skilled professionals, we are constantly engaged in manufacturing superior range of GRP pipes since the time of our inception. We make sure that our products are always prepared or manufactured based on current market trends by opting for latest tools and technologies.

SALIENT FEATURES

• Long, Effective service life materials
• Corrosion Resistance
• No need for linings, coatings, cathodic protection, wraps or other forms of additional corrosion
• Light in weight, Hence low transport costs
• Eliminates need for expensive handling equipment
• Standard length up to 12 meter, Hence fewer joints reduce installation time
• Extremely smooth inner bore, Hence low friction loss in pipelines means less pumping energy needs and lower operating costs
• High Resistance to Surge Pressure
• Low Thermal Conductivity
• UV Resistance
• Better Hydraulic Efficiency
• Low maintenance cost

TECHNICAL SPECIFICATION

Our pipes, fittings and liners are ID based and cover a wide range of applications and sizes.

DESIGN STANDARDS

• DN - Diameters from 25 mm to 3000 mm
• Major Design Standards: API 15LR, ASTMD 2992, AWWA M45, ASTMD 2996, IS0 14692, ASME B 31.3

CLASS

• PN - Pressure Classes 3, 6, 9, 12 & 15 Bar. Availability of higher pressure classes on request upto 70 Bar
• SN - Stiffness Classes 62, 124, 248 & 496 kPa. Availability of higher stiffness classes on request

SIZE

L - Length from 2 mtrs to 12 mtrs

MATERIAL OF CONSTRUCTION

• Epoxy Resin
• Fiberglass

QUALITY SPECIFICATIONS

• As per AWWA Specifications: AWWA C 950
• For High Pressure Applications: ASTM D 2996
• For Hydrostatic Design Base: ASTM D 2992
• For Oil & Petroleum Sector: API 15 LR up to 1000 PSI

SALIENT FEATURES

• Light weight and long service life up to 50 years
• Excellent resistance against corrosive material and erosive natural soil
• Several Precision Joining Mechanisms Available
  • Butt & Wrap Lamination Type
  • Flange End Type
• Selection of compatible Resin based on fluid application
• Capability to sustain high pressure and buckling for UG application
• High amount of UV Stabilization and Low Thermal Application for AG application & Flexibility of modification within a short duration
• Superior hydraulic characteristics
• Fast execution & Completion of projects in time

TECHNICAL SPECIFICATIONDESIGN STANDARDS

Major Design Standards (As Applicable): BS 7159, IS0 14692, API 15LR, ASMEB 31.3, DIN 16965 & 16966

DN, PN Class

• Process Pipe Diameter Ranges : 25 mm to 1200 mm
• Pressure Range: 1 Bar to 32 Bar (Higher Pressure Class available as per customer requirement)

SIZE

Pipes are available in various lengths from 3.0 meter to 12.0 meter as required.

MATERIAL OF CONSTRUCTION

• Polyester Resin
• Vinyl Ester Resin
• Superior Grade Vinyl Ester Resin
• Isophthalic Resin
• Epoxy Resin
• Fiberglass

QUALITY SPECIFICATIONS

• As per AWWA Specifications: AWWA C 950
• As per ISO Specifications: ISO 14692
• For High Pressure Applications: ASTM D 2996
• For Oil & Petroleum Sector: API 15 LR up to 1000 PSI
• For Thermoplastic Liner with GRP: DIN 16965 & DIN 16966

SALIENT FEATURES

• Light weight and long service life up to 50 years
• Excellent resistance against corrosive material and erosive natural soil
• No need for linings, coatings, cathodic protection, wraps or other forms of additional corrosion
• Selection of compatible Resin based on fluid application
• Capability to sustain high pressure and buckling for UG application
• High amount of UV Stabilization and Low Thermal Application for AG application
• Flexibility of modification within a short duration
• Superior hydraulic characteristics
• Easy installation using coupler joints
• Fast execution & Completion of projects in time

TECHNICAL SPECIFICATION

Our pipes, fittings and liners are ID based and cover a wide range of applications and sizes.

DESIGN STANDARDS

• Major Design Standards (As Applicable):AWWA M45, BS 6464, BS 7159, ASTMD 3982, IS0 14692, API 15LR, ASMEB 31.3, DIN 16965 & 16966, AS 2634

DN, PN, SN CLASS

• As per BIS code Diameter Range: 200 mm to 3000 mm
• As per AWWA code Diameter Range: 25 mm to 3600 mm
• As per ISO code Diameter Range: 50 mm to 4000mm
• As per BIS code Pressure Range: 3, 6, 9, 12 & 15 Bar
• As per AWWA Pressure Range: 50 psig to 450 psig (0.345 Mpa to 3.103 Mpa)
• As per ISO code Pressure Range: 1 Bar to 32 Bar
• As per BIS code Stiffness Class: 62, 124, 248, 496 Kpa (A, B, C & D respectively)
• As per AWWA Stiffness Class: 62, 124, 248, 496 Kpa (A, B, C & D respectively)
• As per ISO code Stiffness Class: 630 (only for special applications), 1250 (only for special applications), 2500, 5000, 10000 N/m2 (supplied based on requirements)

SIZE

Pipes are available in various lengths from 3.0 meter to 12.0 meter as required.

MATERIAL OF CONSTRUCTION

• Polyester Resin
• Vinyl Ester Resin
• Superior Grade Vinyl Ester Resin
• Isophthalic Resin
• Epoxy Resin
• Fiberglass

QUALITY SPECIFICATIONS

• As per BIS Specifications: IS 12709 & IS 14402
• As per AWWA Specifications: AWWA C 950
• As per ISO Specifications: ISO 10639 & ISO 10467
• For High Pressure Applications: ASTM D 2996
• For Oil & Petroleum Sector: API 15 LR up to 1000 PSI
• For Thermoplastic Liner with GRP: DIN 16965 & DIN 16966

FRP pipes suit adverse soil or weather conditions too. They have the capabilities to work under high temperatures and pressure when installed in adverse conditions. The most common applications of FRP pipes include water supplies, irrigation system, gas or chemical industries etc. They are taken as best product solution for petrochemical industries.

Owing to deep industry knowledge and skilled professionals, we are constantly engaged in manufacturing superior range of GRP pipes since the time of our inception. We make sure that our products are always prepared or manufactured based on current market trends by opting for latest tools and technologies.

SALIENT FEATURES

• Long, Effective service life materials
• Corrosion Resistance
• No need for linings, coatings, cathodic protection, wraps or other forms of additional corrosion
• Light in weight, Hence low transport costs
• Eliminates need for expensive handling equipment
• Standard length up to 12 meter, Hence fewer joints reduce installation time
• Extremely smooth inner bore, Hence low friction loss in pipelines means less pumping energy needs and lower operating costs
• High Resistance to Surge Pressure
• Low Thermal Conductivity
• UV Resistance
• Better Hydraulic Efficiency
• Low maintenance cost

TECHNICAL SPECIFICATION

Our pipes, fittings and liners are ID based and cover a wide range of applications and sizes.

DESIGN STANDARDS

• DN - Diameters from 25 mm to 3000 mm
• Major Design Standards: API 15LR, ASTMD 2992, AWWA M45, ASTMD 2996, IS0 14692, ASME B 31.3

CLASS

• PN - Pressure Classes 3, 6, 9, 12 & 15 Bar. Availability of higher pressure classes on request upto 70 Bar
• SN - Stiffness Classes 62, 124, 248 & 496 kPa. Availability of higher stiffness classes on request

SIZE

L - Length from 2 mtrs to 12 mtrs

MATERIAL OF CONSTRUCTION

• Epoxy Resin
• Fiberglass

QUALITY SPECIFICATIONS

• As per AWWA Specifications: AWWA C 950
• For High Pressure Applications: ASTM D 2996
• For Hydrostatic Design Base: ASTM D 2992
• For Oil & Petroleum Sector: API 15 LR up to 1000 PSI

SALIENT FEATURES

• Light weight and long service life up to 50 years
• Excellent resistance against corrosive material and erosive natural soil
• Several Precision Joining Mechanisms Available
  • Butt & Wrap Lamination Type
  • Flange End Type
• Selection of compatible Resin based on fluid application
• Capability to sustain high pressure and buckling for UG application
• High amount of UV Stabilization and Low Thermal Application for AG application & Flexibility of modification within a short duration
• Superior hydraulic characteristics
• Fast execution & Completion of projects in time

TECHNICAL SPECIFICATIONDESIGN STANDARDS

Major Design Standards (As Applicable): BS 7159, IS0 14692, API 15LR, ASMEB 31.3, DIN 16965 & 16966

DN, PN Class

• Process Pipe Diameter Ranges : 25 mm to 1200 mm
• Pressure Range: 1 Bar to 32 Bar (Higher Pressure Class available as per customer requirement)

SIZE

Pipes are available in various lengths from 3.0 meter to 12.0 meter as required.

MATERIAL OF CONSTRUCTION

• Polyester Resin
• Vinyl Ester Resin
• Superior Grade Vinyl Ester Resin
• Isophthalic Resin
• Epoxy Resin
• Fiberglass

QUALITY SPECIFICATIONS

• As per AWWA Specifications: AWWA C 950
• As per ISO Specifications: ISO 14692
• For High Pressure Applications: ASTM D 2996
• For Oil & Petroleum Sector: API 15 LR up to 1000 PSI
• For Thermoplastic Liner with GRP: DIN 16965 & DIN 16966

SALIENT FEATURES

• Light weight and long service life up to 50 years
• Excellent resistance against corrosive material and erosive natural soil
• No need for linings, coatings, cathodic protection, wraps or other forms of additional corrosion
• Selection of compatible Resin based on fluid application
• Capability to sustain high pressure and buckling for UG application
• High amount of UV Stabilization and Low Thermal Application for AG application
• Flexibility of modification within a short duration
• Superior hydraulic characteristics
• Easy installation using coupler joints
• Fast execution & Completion of projects in time

TECHNICAL SPECIFICATION

Our pipes, fittings and liners are ID based and cover a wide range of applications and sizes.

DESIGN STANDARDS

• Major Design Standards (As Applicable):AWWA M45, BS 6464, BS 7159, ASTMD 3982, IS0 14692, API 15LR, ASMEB 31.3, DIN 16965 & 16966, AS 2634

DN, PN, SN CLASS

• As per BIS code Diameter Range: 200 mm to 3000 mm
• As per AWWA code Diameter Range: 25 mm to 3600 mm
• As per ISO code Diameter Range: 50 mm to 4000mm
• As per BIS code Pressure Range: 3, 6, 9, 12 & 15 Bar
• As per AWWA Pressure Range: 50 psig to 450 psig (0.345 Mpa to 3.103 Mpa)
• As per ISO code Pressure Range: 1 Bar to 32 Bar
• As per BIS code Stiffness Class: 62, 124, 248, 496 Kpa (A, B, C & D respectively)
• As per AWWA Stiffness Class: 62, 124, 248, 496 Kpa (A, B, C & D respectively)
• As per ISO code Stiffness Class: 630 (only for special applications), 1250 (only for special applications), 2500, 5000, 10000 N/m2 (supplied based on requirements)

SIZE

Pipes are available in various lengths from 3.0 meter to 12.0 meter as required.

MATERIAL OF CONSTRUCTION

• Polyester Resin
• Vinyl Ester Resin
• Superior Grade Vinyl Ester Resin
• Isophthalic Resin
• Epoxy Resin
• Fiberglass

QUALITY SPECIFICATIONS

• As per BIS Specifications: IS 12709 & IS 14402
• As per AWWA Specifications: AWWA C 950
• As per ISO Specifications: ISO 10639 & ISO 10467
• For High Pressure Applications: ASTM D 2996
• For Oil & Petroleum Sector: API 15 LR up to 1000 PSI
• For Thermoplastic Liner with GRP: DIN 16965 & DIN 16966

FRP pipes suit adverse soil or weather conditions too. They have the capabilities to work under high temperatures and pressure when installed in adverse conditions. The most common applications of FRP pipes include water supplies, irrigation system, gas or chemical industries etc. They are taken as best product solution for petrochemical industries.