APPLICATION :'A-SEAL' is a versatile material with many uses. It is very useful for sealing, repairing, joining, insulating and water proofing of a variety of materials like ferrous and non-ferrous metals, wood, glass, asbestos, R.C.C, ceramics, and most of the plastics.

FOUNDRIES : 'A-SEAL'is ideal for sealing and plugging of blow-holes. Patterns and Moulds can also be repaired.

ELECTRICAL :'A-SEAL' is ideal for moisture proofing the cable joints made with C.I Boxes, sealing leakages in transformers, repairing chipped porcelain insulator, & bushings, etc.

AUTOMOBILES :It is suitable for filling up dents on Automobile bodies, repairing broken silencers pipes and muffler joints. Leakage anywhere in the Engine, Radiator, Fuel Tank can also be sealed.

PLUMBING :Joints of C.I pipes can be sealed with 'A-SEA:'

HOUSEHOLD :'A-SEAL' is most suitable for stopping leakages in pipes, overheads tanks, roofing of asbestos , tin, or R.C.C Articles like Washbasins, Bathtubs, Commodes, Cisterns, Corroded corners of refigerators & coolers can be very easily reparied with 'A-SEAL'.

PRECAUTIONS :
*Mix only the required quantity and apply immediately.* Repack the Unmixed Material in the Wrapper* Do Not use A-SEAL on the surface which is in contact with direct flame / food or drinking water.* Wash hands with soap and water immediately after use

A-Seal Metal filled epoxy compounds are two components epoxy formulation(Resin and Hardener). The Resin component is an admixture of a liquid resin and metal powder and the hardener is also in liquid form. Metal filled compounds are available in a variety for specific application such as Steel filled, Brass filled, Aluminium filled, Copper filled etc. and for enabling repaired portions to have a surface match with that of the parent metal. The resin and hardener components are required to be mixed in the ratio 10:1 by weight.

INTRODUCTION :'A-SEAL' Asbestos filled compound is based on Epoxy Systems. It is a two component product (Resin & Hardner) supplied in two different containers.

RATIO :RESIN : 1 KG, HARDNER : 100 GM.

APPLICATIONS :It is a verstile material for repairing, joining, sealing and fixing of asbestos sheets. A broken or cracked sheet need not replacement, it can be raepaired on the place where it is fixed. It is a non-sagging material and can be used on vertical surfaces as well.

HOW TO USE :Mix thoroughly resin and hardner in ratio of 10:1 clean the surface and apply the mixed compound with a putty knife or with hand to cover the cracked sheet. To cover a hole in the sheet a little bigger piece of asbestos sheet can be patched on it with the of A-SEAL asbestos filled.

PRECAUTIONS:Before application :* The surface to be rapaired should be free from rust, dust, moisture, oil and bitumen. Adhesion will improve by roughening the surface by sand paper.* Mix only the required quantity at a time which can be used within 10 minutes.* Wash hands with soap and water after applying the compound.

APPLICATION :'A-SEAL' is a versatile material with many uses. It is very useful for sealing, repairing, joining, insulating and water proofing of a variety of materials like ferrous and non-ferrous metals, wood, glass, asbestos, R.C.C, ceramics, and most of the plastics.

FOUNDRIES : 'A-SEAL'is ideal for sealing and plugging of blow-holes. Patterns and Moulds can also be repaired.

ELECTRICAL :'A-SEAL' is ideal for moisture proofing the cable joints made with C.I Boxes, sealing leakages in transformers, repairing chipped porcelain insulator, & bushings, etc.

AUTOMOBILES :It is suitable for filling up dents on Automobile bodies, repairing broken silencers pipes and muffler joints. Leakage anywhere in the Engine, Radiator, Fuel Tank can also be sealed.

PLUMBING :Joints of C.I pipes can be sealed with 'A-SEA:'

HOUSEHOLD :'A-SEAL' is most suitable for stopping leakages in pipes, overheads tanks, roofing of asbestos , tin, or R.C.C Articles like Washbasins, Bathtubs, Commodes, Cisterns, Corroded corners of refigerators & coolers can be very easily reparied with 'A-SEAL'.

PRECAUTIONS :
*Mix only the required quantity and apply immediately.* Repack the Unmixed Material in the Wrapper* Do Not use A-SEAL on the surface which is in contact with direct flame / food or drinking water.* Wash hands with soap and water immediately after use

A-Seal Metal filled epoxy compounds are two components epoxy formulation(Resin and Hardener). The Resin component is an admixture of a liquid resin and metal powder and the hardener is also in liquid form. Metal filled compounds are available in a variety for specific application such as Steel filled, Brass filled, Aluminium filled, Copper filled etc. and for enabling repaired portions to have a surface match with that of the parent metal. The resin and hardener components are required to be mixed in the ratio 10:1 by weight.

INTRODUCTION :'A-SEAL' Asbestos filled compound is based on Epoxy Systems. It is a two component product (Resin & Hardner) supplied in two different containers.

RATIO :RESIN : 1 KG, HARDNER : 100 GM.

APPLICATIONS :It is a verstile material for repairing, joining, sealing and fixing of asbestos sheets. A broken or cracked sheet need not replacement, it can be raepaired on the place where it is fixed. It is a non-sagging material and can be used on vertical surfaces as well.

HOW TO USE :Mix thoroughly resin and hardner in ratio of 10:1 clean the surface and apply the mixed compound with a putty knife or with hand to cover the cracked sheet. To cover a hole in the sheet a little bigger piece of asbestos sheet can be patched on it with the of A-SEAL asbestos filled.

PRECAUTIONS:Before application :* The surface to be rapaired should be free from rust, dust, moisture, oil and bitumen. Adhesion will improve by roughening the surface by sand paper.* Mix only the required quantity at a time which can be used within 10 minutes.* Wash hands with soap and water after applying the compound.