The epax-series of special purposes tabletop equipments from epoint technologies are suitable for measuring attenuation, crosstalk and impedance of cables especially instrumentation cables , telecommunication cables, signaling cables etc. The test is conducted @ 1khz sinusoidal ac voltage and the reading is directly expressed in db for fast analysis. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing. Features:> direct reading in db for attenuation & crosstalk > auto ranging from 0 to 120 db. > micro computing.> single button direct db measurement.> self stripping clips for cable connection, no need to remove cable insulation.> superhedrodyne selective level meter.

The EPAX-series of special purposes tabletop equipments from ePoint Technologies are suitable for measuring Attenuation, Crosstalk and Impedance of cables especially Instrumentation Cables , Telecommunication Cables, Signaling Cables etc. The test is conducted @ 1KHz sinusoidal AC voltage and the reading is directly expressed in dB for fast analysis. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing.

Features :  

• Direct reading in dB for Attenuation & Crosstalk  
• Auto Ranging from 0 to 120 dB.  
• Micro computing.  
• Single button direct dB measurement.  
• Self stripping clips for cable connection, no need to remove cable insulation.

The EPCZ-series of special purposes tabletop equipments from ePoint Technologies are suitable for measuring Characteristic Impedance of cables especially Instrumentation Cables , Telecommunication Cables, Signaling Cables etc. The test is conducted @ 1MHz sinusoidal AC voltage and the reading is directly expressed in Ohm for fast analysis. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing.

Features :  

• Direct reading of Characteristic Impedance.  
• Auto Ranging  
• Micro computing.  
• Single button direct measurement.  
• Self stripping clips for cable connection, no need to remove cable insulation.

The EPCZ-series of special purposes tabletop equipments from ePoint Technologies are suitable for measuring Characteristic Impedance of cables especially Instrumentation Cables , Telecommunication Cables, Signaling Cables etc. The test is conducted 1KHz sinusoidal AC voltage and the reading is directly expressed in Ohm for fast analysis. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing.

Features:  

• Direct reading of Characteristic Impedance.  
• Auto Ranging  
• Micro computing.  
• Single button direct measurement.  
• Self stripping clips for cable connection, no need to remove cable insulation.

EPNR-1390UC (Noise Rejection Ratio Meter) is a special purpose table top equipment suitable for measuring shield efficiency of cables especially instrumentation cables. The test is conducted @ 1kHz and the reading is directly expressed in dB for fast analysis. The parameter is also called 'Static Noise Rejection Ratio' measurement. The instrumentation is well embedded with a stable test voltage source, in- built wide range digital micro volt meter and a microcomputer for digital signal processing. This instrument is equally useful for measuring shield efficiency in multicore as well as single core shielded cables

The EPCU-series of special purposes tabletop equipments from ePoint Technologies are suitable for measuring capacitance unbalances in the cable pairs, especially Instrumentation Cables , Telecommunication Cables, Signaling Cables etc. The test is conducted @ 1KHz sinusoidal AC voltage and the reading is directly shown on LED display. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing. Features: 1.Direct reading for Capacitance Unbalance pair to pair (CUPP) (K1) and Capacitance Unbalance pair to ground (CUPG) E1 and E2 2 Pair Test jig with self-stripping clips.

Offered by us in several specifications, our products are in complete compliance with the quality standards. We are backed with highly experience packaging experts and team members; they ensure that the packaging is done with utmost proficiency and keeping in mind the globally accepted norms.

 

Features :

• No Manual balancing is required
• Any type of up-gradation in the existing system can be possible

The epax-series of special purposes tabletop equipments from epoint technologies are suitable for measuring attenuation, crosstalk and impedance of cables especially instrumentation cables , telecommunication cables, signaling cables etc. The test is conducted @ 1khz sinusoidal ac voltage and the reading is directly expressed in db for fast analysis. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing. Features:> direct reading in db for attenuation & crosstalk > auto ranging from 0 to 120 db. > micro computing.> single button direct db measurement.> self stripping clips for cable connection, no need to remove cable insulation.> superhedrodyne selective level meter.

The EPAX-series of special purposes tabletop equipments from ePoint Technologies are suitable for measuring Attenuation, Crosstalk and Impedance of cables especially Instrumentation Cables , Telecommunication Cables, Signaling Cables etc. The test is conducted @ 1KHz sinusoidal AC voltage and the reading is directly expressed in dB for fast analysis. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing.

Features :  

• Direct reading in dB for Attenuation & Crosstalk  
• Auto Ranging from 0 to 120 dB.  
• Micro computing.  
• Single button direct dB measurement.  
• Self stripping clips for cable connection, no need to remove cable insulation.

The EPCZ-series of special purposes tabletop equipments from ePoint Technologies are suitable for measuring Characteristic Impedance of cables especially Instrumentation Cables , Telecommunication Cables, Signaling Cables etc. The test is conducted @ 1MHz sinusoidal AC voltage and the reading is directly expressed in Ohm for fast analysis. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing.

Features :  

• Direct reading of Characteristic Impedance.  
• Auto Ranging  
• Micro computing.  
• Single button direct measurement.  
• Self stripping clips for cable connection, no need to remove cable insulation.

The EPCZ-series of special purposes tabletop equipments from ePoint Technologies are suitable for measuring Characteristic Impedance of cables especially Instrumentation Cables , Telecommunication Cables, Signaling Cables etc. The test is conducted 1KHz sinusoidal AC voltage and the reading is directly expressed in Ohm for fast analysis. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing.

Features:  

• Direct reading of Characteristic Impedance.  
• Auto Ranging  
• Micro computing.  
• Single button direct measurement.  
• Self stripping clips for cable connection, no need to remove cable insulation.

EPNR-1390UC (Noise Rejection Ratio Meter) is a special purpose table top equipment suitable for measuring shield efficiency of cables especially instrumentation cables. The test is conducted @ 1kHz and the reading is directly expressed in dB for fast analysis. The parameter is also called 'Static Noise Rejection Ratio' measurement. The instrumentation is well embedded with a stable test voltage source, in- built wide range digital micro volt meter and a microcomputer for digital signal processing. This instrument is equally useful for measuring shield efficiency in multicore as well as single core shielded cables

The EPCU-series of special purposes tabletop equipments from ePoint Technologies are suitable for measuring capacitance unbalances in the cable pairs, especially Instrumentation Cables , Telecommunication Cables, Signaling Cables etc. The test is conducted @ 1KHz sinusoidal AC voltage and the reading is directly shown on LED display. The instrument is well embedded with the stable test voltage source, in built wide range digital microvolt meter and a microcomputer for digital signal processing. Features: 1.Direct reading for Capacitance Unbalance pair to pair (CUPP) (K1) and Capacitance Unbalance pair to ground (CUPG) E1 and E2 2 Pair Test jig with self-stripping clips.

Offered by us in several specifications, our products are in complete compliance with the quality standards. We are backed with highly experience packaging experts and team members; they ensure that the packaging is done with utmost proficiency and keeping in mind the globally accepted norms.

 

Features :

• No Manual balancing is required
• Any type of up-gradation in the existing system can be possible