Cwdm Sfp Transceiver

Eoptolink CWDM SFP+ transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LRLWERZR. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 14 dB is offered. The transmitter section uses a CWDM multiple quantum well DFBEML laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.BIDI CWDM SFP+special CWDM SFP+, TX and RX with the same wavelength. It comes with pigtail LCAPC or SCAPC coming out from the transceiver port. AT present available waves 1270-1330, if you need other waves, please, contact with us.Features:Up to 10.5 Gbs Bi-directional Data LinksCan be used with single fiber CWDM system or dual fiber CWDM system10Gb Ethernet2G4G8G10G Fibre Channel complianceComplaint to SFP+ MSACompliant to IEEE 802.3ae 10GBASEMaximum Link Length of 80 km at 10.3125GbsUncooled 18- CWDM DFBcooled EML LD: from 1270 nm to 1610 nmPower Budget up to 10dB, 14dB, 16dB, 23 dBSFF-8472 Digital Diagnostic FunctionACAC Coupling according to MSASingle +3.3 V Power SupplyRoHS 66 CompliantClass 1 Laser International Safety Standard IEC-60825 Compliant

View Complete Details

Ask Latest Price & Details

Cwdm Single Fiber System

We are offering cwdm single fiber system.Optolink is producing complete range of wdm systems that can be done according to customer requirements or network topology.Feature:20nm itu channel spacingcwdm up to 18ch channel over one fiber100mb10gb per channellow insertion losswide pass bandhigh channel isolationhigh stability and reliabilityepoxy free optical pathused with cwdm sfp transceiver, cwdm xfp transceiver, cwdm x2 transceiver, cwdm sfp+ transceiverapplication:channel adddropdwdm networkfiber optical amplifiercatv fiber-optic system****cis at eoptolink.com eoptolink at gmail.com3w.sfp-xfp.com skype id: eoptolink-sfp tel: +86-28-67 087 999 direct: +86 15 601 668 099eoptolink technology inc. Ltd. add: no.127 west wulian street, gongxing town, shuangliu county, chengdu city

Ask Latest Price & Details

Dwdm Single Fiber System

Eoptolink is producing complete range of dwdm systems that can be done according to customer requirements or network topology.Feature:100ghz or 50ghz itu channel spacingdwdm x channel over one fiber100mb100gb per channellow insertion losswide pass bandhigh channel isolationhigh stability and reliabilityepoxy free optical pathused with dwdm sfp transceiver, dwdm xfp transceiver, dwdm x2 transceiver, dwdm sfp+ transceiver, tunable sfp+, tunable xfpapplication:channel adddropdwdm networkfiber optical amplifiercatv fiber-optic system****

Ask Latest Price & Details

Cwdm Dual Fiber System

We offer cwdm dual fiber system. Eoptolink is producing complete range of cwdm systems that can be done according to customer requirements or network topology.feature:20nm itu channel spacingcwdm 18 channel over 2 fiber100mb10gb per channellow insertion losswide pass bandhigh channel isolationhigh stability and reliabilityepoxy free optical pathused with cwdm sfp transceiver, cwdm xfp transceiver, cwdm x2 transceiver, cwdm sfp+ transceiverapplication:channel adddropcwdm networkfiber optical amplifiercatv fiber-optic systemcis@eoptolink.com eoptolink@gmail.comwww.sfp -xfp.com skype id: eoptolink-sfp tel: +86-28-67087999 direct: +86 15601668099eoptolink technology inc. Ltd. add: no.127 west wulian street, gongxing town, shuangliu county, chengdu city.

Ask Latest Price & Details

Tunable Dwdm Xfp Transceivers

We are offering tunable dwdm xfp.The eoptolink dwdm tunable xfp 10 gbps multiprotocol optical transceiver is an integrated fiber optic transceiver that provides a high-speed serial link at signaling rates from 9.95 gbps to 11.1 gbps. The module complies with the 10 gigabit small form factor pluggable (xfp) multisource agreement (msa). It complies with the itu-t g.698.1 s-d100s1-2d standard with 50 ghz channel spacing for sonetsdh, ieee dwdm 10gbase-zr for 80 km reach (ethernet), and dwdm 10gfc for 80 km reach (fibre channel) applications. The transceiver integrates the receive and transmit path on one module. On the transmit side, the 10 gbps serial data stream is recovered, retimed, and passed to a modulator driver. The modulator driver biases and modulates a c-band-tunable integrated laser, enabling data transmission over single-mode fiber through an industry-standard lc connector. On the receive side, the 10 gbps optical data stream is recovered from an apdtransimpedance amplifier, retimed, and passed to an output driver. This module features a hot-pluggable xfi-compliant electrical interface. Key benefits supports 9.953 gbps (sonet and sdh), 10.31 gbps (ethernet), 10.52 gbps (fibre channel), and corresponding forward error correction (fec) rates of 10.6610.70911.0911.35 gbps monolithically integrated full c-band tunable transmitter 50 ghz itu channel spacing with integrated wavelength locker commercial operating temperature from -5c to 70c maximum power dissipation of 3.5 w no reference clock required digital diagnostic monitoring support applications wide, local, and storage area networks sonet oc-192 and sdh stm-64 ethernet and fibre channel switches compliance xfp msa revision 4.5 sff-8477 rohs 66 telcordia gr-253-core and tested in accordance with gr-468 itu-t g.691 ieee 802-3ae-2002 10 gfc 1200-sm-ll-l class 1 laser safety.

Additional Information:

Payment Terms : T/T

View Complete Details

Ask Latest Price & Details

8g Xfp Transceiver

We are offering eoptolink series multi-rate 8g xfp transceiver is designed for serial optical data communications such as 8g fiber channel. It supports the 8.5gbps transmission on 9125 mm smf. A serial eeprom in the transceiver allows the user to access transceiver digital diagnostic monitoring and configuration data via the 2-wire xfp management interface.Features:up to 8.5 gbs bi-directional data linkcomplaint to xfp msacompliance with fibre channel fc-pi-4 800-sm-lc-icompliant with 4g, 2g fibre channel2-wire interface for integrated digital diagnostic monitoringno reference clock requiredlow power dissipationonly required +3.3 v power supplyrohs 66 compliantduplex lc connectorapplication:multi-rate 8x4x2x fiber channelordering information:package part no. fiber type data rate range wavelength optical components distance range case temperature range applicationxfp eolx-8580-02 mmf 8.5g 850nm vscelpin 300m 070 -4085c 8xfcxfp eolx-1380-10 smf 8.5g 1310nm fppin 10km 070 -4085c 8xfcxfp eolx-1680-40 smf 8.5g 1550nm emlpin 40km 070 -4085c 8xfcxfp eolx-1680-80 smf 8.5g 1550nm emlapc 80km 070c -4085c 8xfccis at eoptolink.c om eoptolink at gmail.c om3w.sfp-xfp.c om skype id: eoptolink-sfp tel: +86-28-67 087 999 direct: +86 15 601 668 099eoptolink technology inc. Ltd. add: no.127 west wulian street, gongxing town, shuangliu county, chengdu city.

View Complete Details

Ask Latest Price & Details

Xfp Transceiver

We are offering xfp transceiver.Eoptolink xfp transceiver is a high performance, cost effective modulse for serial optical data communications applications specified for signal rates of 9.95 gbs to 11.3 gbs. It is fully compliant to xfp msa rev 4.5. The modules are designed for single mode fiber and operates at a nominal wavelength of 85013101550 nm, xfp sr, sfp lr, xfp er and xfp zr. The transmitter section incorporates uncooled directly modulated 1310 nm distributed feedback laser (dfb) or eml colled laser 1550nm. The receiver section uses pin photodetector for low dark current and excellent responsivity or apd high sensetivity receiver.Features:supports 9.95gbs to 11.3gbs bit ratesiec 60825-1 class 1cdrh class 1 laser eye safety.Hot-pluggable xfp footprintmaximum link length of 80kmdfb or temperature-stabilized eml transmitterxfi loopback modeduplex lc connectorlow power dissipationsuperior thermal and emi integrity performance to support high port densitieslc duplex optical connector interface conforming to ansi tiaeia604-10 (focis 10)built-in digital diagnostic functions, ddmitemperature range -5c to 70c or indutrial temperature range on requestrohs-6, ce, fda, fcc, tuv, ul certifactesapplication:sonet oc-192 sdh stm-64itu-t g.70910gbase-srlrerewzr10gbase-srlrerewzr+ fec104080 km 10g fibre channel104080 km 10g fibre channel + fec

View Complete Details

Ask Latest Price & Details

Dwdm Xfp Transceiver

We are offering dwdm xfp transceiver, eoptolink dwdm xfp transceivers are available in channels defined in the itu grid (100 ghz spacing), from channel 19 to channel 61, or itu grid (50ghz spacing), from channel 200 to 592ch. Eoptolink currently offers dwdm xfp optics for 10g networking at ranges between 40km, 80km. Dwdm xfp 120km is under development now. Dwdm stands for dense wavelength-division multiplexing. It is a technology which multiplexes a number of different colored optical signals together. These systems are popular with telecommunications companies because they allow them to expand the capacity of the network without laying more fiber. More recently, smaller isps have been using this equipment as well; they will rent or buy dark fiber and by utilizing dwdm they can put more traffic over the same line. Eoptolink has industry fastest lead time on dwdm 10g transceivers in different for factors. Features:supports 9.95gbs to 11.1gbs bit ratesdwdm 100ghz or dwdm 50ghzcan be used with single fiber dwdm system and dual fiber dwdm systemhot-pluggable xfp footprintmaximum link length of 80kmcooled dwdm eml laser. Duplex lc connectorlow power dissipationbuilt-in digital diagnostic functions, ddmitemperature range -5c to 70crohs, ce, fda, fcc, tuv, ul certifactapplication:9.95g sonetsdh10.3g ethernet10.5g fiber channel10.7g sonetsdh+fec11.1g ethernet+fec11.3g 10gfc+fecdwdm networks.

View Complete Details

Ask Latest Price & Details

Xfp Loopback

Xfp electrical loopbacks from eoptolink provides a method for port operation testing in board, hub, system and applications. The xfp loopback supports various 10g application standards, it is capable of achieving up to 10gbps data transfer rate. The dual integrated led indicator light ensures the loopback is properly seated, powered and performance status. Xfp loopbacks are hot swappable, constructed of die cast for emi performance. They are compliant with the industry standard xfp msa (multi-source agreement).Features:support 9.95gbps to 10.7gbps data rateoperating temperature -40c to +85cfront dual led status indicator3w power consumption, 2.5w2w1.5w customer optionalno reference clock requiredbuilt-in digital diagnostic functions and memory organized to meet xfp msa ver4.5automatically shutdown & self-protectionelectrical loopback and with cdr version optionalsuitable for chamber testingapplications:10gbps applicationsboard and system level testingtest & measurementsupported standards:10 gigabit ethernet10 gigabit fiber channelsonet oc-192, sdh stm-64benifits:cost effectivedurable and stablewide operating temperature range

View Complete Details

Ask Latest Price & Details

Tunable Dwdm Sfp+ Transceiver

We are offering tunable dwdm sfp+ transceiver.Eoptolink tunable sfp+ transceiver is fully compliant to sfp+ msa. It supports 50ghz dwdm 10gbs sonetsdh, 10 gigabit ethernet, and 10 gigabit fibre channel applications over fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the sfp+ msa and sff 8472 msa. Specification and feature highlights: compliant with sff 8431&8432&8472 msac-band wavelengths (with 50 ghz dwdm itu grid)data rates: 8.5 - 11.35 gbpspower budget 14db or 22db optionhot-swap sfp footprint duplex lc connector interfaceclass 1 fda and iec60825-1 laser safety compliantoperating case temperature: -5+70 application: 10 gbps ethernet withwithout fec8.5 gbps fibre channel10 gbps fibre channel withwithout fecsonet oc-192stm-64 withwithout fec ordering information for tunable sfp+:part no. data rate power budget temp. ddmieolp-1696-tdw-14xxx 10gbps 14db -570 yeseolp-1696-tdw-22xxx 10gbps 22db -570 yes note: xxx refers to the initialpre-set dwdm wavelength.Cisco systems, juniper, brocade ip, extreme, adva, eci, huawei, nokia siemens networks, transmode****

Additional Information:

Payment Terms : T/T

View Complete Details

Ask Latest Price & Details

Sfp 16g Fibre Channel Transceivers

Eoptolink offers sfp+ 16g, sfp 16g fibre channel transceivers that are sfp compliant. This fibre channel transceiver solution supports high-speed serial links over multimode optical fiber at signaling rates up to 14.025 gbd. Using the 2-wire serial interface defined in the sff-8472 msa, these 16g fibre channel transceivers provide real-time temperature, supply voltage, laser bias current, laser average output power and received input power. Compliant with small form pluggable (sfp) multi source agreement (msa) mechanical and electrical specifications for lc duplex transceivers, ansi fibre channel transceiver for fc-pi-5 and fc-pi-2 gigabit applications.Cisco systems, juniper, brocade ip, extreme, adva, eci, huawei, nokia siemens networks, transmode****

Additional Information:

Payment Terms : T/T

Ask Latest Price & Details

Dwdm Sfp+ Transceiver

We are offering Dwdm Sfp+ Transceiver, The Eoptolink DWDM SFP+ is specifically designed for carriers and large enterprises that require a scalable, flexible, cost-effective system for multiplexing, transporting and protecting high-speed data, storage, voice and video applications in point-to-point, adddrop, ring, mesh and star network topologies. Digital diagnostic functions areavailable via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 100GHz or 50GHz ITU Grid, C Band DWDM wavelength. Aguaranteed minimum optical link budget of 14dB 23 dB is offered. Features:Support 9.95 Gbps to 11.1GbpsCan be used with single fiber DWDM system and dual fiber DWDM systemComplaint to SFP+ MSACompliant to IEEE 802.3ae 10GBASE-ZR and 10GBASE-ERCompliant with OC-192 SDH STM LR2Maximum Link Length of 80 kmTemperature-stabilized DWDM EML Transmitter14dB(15) 23dB(24) Power Budget at Least100 or 50GHz ITU Grid, C BandSFF-8472 Digital Diagnostic FunctionACAC Coupling according to MSASingle +3.3 V Power SupplyRoHS 66 Compliant0 to 70oC OperatingClass 1 Laser International Safety Standard IEC-60825 CompliantApplication:10Gbs SONETSDH ITU-T G.959.1 P1L1-2D210Gbs SONETSDH ITU-T G.70910 Gbs OC-192 STM-64 LR210GBASE-ZR and 10GBASE-ER80 km 10G Fibre Channel.

View Complete Details

Ask Latest Price & Details

10G Passive Optical Network

We offer 10g passive optical network. Asymmetric 10g pon asymmetric 10g-pon is specified as xg-pon1: 10 gbits downstream and 2.5 gbits upstream (nominal line rate of 9.95328 gbits downstream and 2.48832 gbits upstream).Symmetric 10g-pon is also proposed as xg-pon2 with 10 gbits upstream, but would require burst-mode lasers on onts to deliver the upstream transmission speed.Framing is g-pon like but uses different wavelengths from g-pon (using a wdm to separate them) so that g-pon subscribers can be upgraded to 10g-pon incrementally while gpon users continue on the original olt. The g-pon standard is g.98. This compares to the ieee 802.3av standard for 10g-epon based on ethernet, which has standardised upstream rates of both 1gbps and 10gbps. The 10 gigabit pon wavelengths (1577 nm down 1270 nm up) differ from gpon and epon (1490 nm down 1310 nm up), allowing it to coexist on the same fibre with either of the gigabit pons.Itu-t recommendation g.987 is a family that defines this access network standard (referred to as xg-pon). It comprises four recommendations:g.987: 10-gigabit-capable passive optical network (xg-pon) systems: definitions, abbreviations, and acronyms, 2010.G.987.1: general requirements of 10g-pon systems (approved 2010-01-13). Includes examples of services, user network interfaces (unis) and service node interfaces (snis), as well as the principal deployment configurations that are requested by network operators.G.987.2: physical media dependent (pmd) layer specification (approved 2010-01-13, updated 2010-10-07). Describes a flexible optical fibre access network representing an evolutionary development from g.984.2, asymmetric only in the current version.G.987.3: transmission convergence (tc) specifications (approved 2010-10-07).G.988: onu management and control interface (omci) specification.(approved 2010-10-07).

View Complete Details

Ask Latest Price & Details

Xenpak To Sfp+ Converter Module

We are offering xenpak to sfp+ converter module. Xenpak is a standardized form factor for 10 gbps ethernet fiber optics transponders. Xenpak optics are used in datacom optical links only (not telecom). The electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gbps ). Xenpak optics are the oldest of the 10g form factors. Xenpak optics have the same connector type as an x2 module (sc). There are a limited amount of line cards and switches which are using xenpak optics. Because xenpak optics are an older technology and are more bulky than the newer optics modules, they are not really used in the newer product line. Production of xenpak optics have been replaced by the x2 modules, and this was then replaced by the xfp and sfp+. There xenpak optics convertors which will convert the xenpak to a sfp 10g. The xenpak adapter has the advantage of letting you use sfp+ optic, considered the form factor of the future. You can cofigure xenpak to sfp+ converter based on your need: dwdm xenpak (based on converter and dwdm sfp+), cwdm xenpak (based on converter xenpak to sfp+ and cwdm sfp+), bidi xenpak (based on xenpak to sfp+ converter and bidi sfp+), xenpak (based on xenpak to sfp+ converter and sfp+) the xenpak optics come in 4 different versions: sx, lx, ex and zx. The sx version will work on multi mode fiber, the lx, ex and zx work only on single mode fiber. The lx will reach a maximum range of 10km, the ex of 40km and the zx of 80km. Based on xenpak to sfpplus converter eoptolink can produce: bidi xenpak, cwdm xenpak, dwdm xenpak and common xenpak. ****

View Complete Details

Ask Latest Price & Details

Bid Xfp Transceivers

We are offering eoptolink bid xfp transceivers are designed for bi-directional 10g serial optical data communications such as ieee 802.3ae 10gbase-bx by using 1330(1270nm) transmitter and 1270(1330) nm receiver. The transceiver consists of two sections: the transmitter section uses a multiple quantum well 1330(1270) nm dfb laser and is a class 1 laser compliant according to international safety standard iec 60825. The receiver section uses an integrated 1270(1330) nm detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic.Features:one fiber bi-directional xfp optical transceiver, bidi wdm xfpfully compliant with xfp msacompliant to ieee 802.3ae 10gbase-bxsff-8472 digital diagnostic functionsimplex lc connector1330tx1270rx and 1270tx1330rxdistance up to 10, 20, 40, 60kmxfi loopback modeno reference clock requiredrohs compliant-5 to 70c operatingsimplex lc connectorapplication:10gbase-bx at 10.3125 gbs10gbase-bx at 9.953 gbscis at eoptolink.c om eoptolink at gmail.c om3w.sfp-xfp.c om skype id: eoptolink-sfp tel: +86-28-67 087 999 direct: +86 15 601 668 099eoptolink technology inc. Ltd. add: no.127 west wulian street, gongxing town, shuangliu county, chengdu city.

View Complete Details

Ask Latest Price & Details

Bidi Sff Transceivers

We are offering eoptolink bidi sff transceivers are available with a variety of different transmitter and receiver types, allowing users to select the appropriate transceiver for each link to provide the required optical reach over the available optical fiber type. Optical sff modules are commonly available in several different categories: bidi sff 10km smf (lx), bidi sff [40 km (xd, er), bidi sff 80 km (zx), bidi sff 120 km (ex or ezx)]. One fiber is used for point to point connection.Features:single fiber wdm sff transceiverspeed up to 2.67 gbpssingle +3.3 v power supplyrohs compliant0 to 70oc or -4085c case operating temperatureclass 1 laser international safety standard iec 60825 compliantapplication:fegesonetsdh equipment interconnectfibre channel links

Ask Latest Price & Details

X2 Transceiver

We are offering x2 transceiver, eoptolink x2 is a standardized form factor for 10 gbs fiber optic transponders that is used for data transfer rates from 10.3 gbs to 10.5 gbs. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation xenpak transponders. Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gbs). Eoptolink manufactures x2 300m, x2 10km, x2 20km, x2 40km, x2 80km optical modules. All modules support digital optical monitoring (dom) function . More customers prefer to use x2 sr, x2 lr, x2 er, x2 zr based on x2 to sfp+ converter and sfp+ transceiver. Xenpak sr, xenpak lr, xenpak er, xenpak zr is based only on xenpak to sfp+ converter and sfp+ transceiver. Features:hot pluggable x2 msa form factorhow total power consumption:rohs-6 compliant (lead-free)transmission distance 300m, 10km, 40km, 80 kmcooled 1550nm eml or uncooled directly modulated distributed feedback (dfb)sc connector, single mode fiberfull duplex transmission modedigital optics monitoring (dom)power supply: +5.0 v, +3.3 vxaui electrical interface 4 x 3.125 gbs ethernet(ftlx1841e2)management and control via mdio 2-wire bus70-pin connectorseparated signalchassis groundmid pak module variance for front panel mountingde-latch mechanism with low extraction forceapplication:x2 sr 10gbase-sr 10g ethernetx2 lr 10gbase-lr 10g ethernetx2 er 10gbase-er 10g ethernetx2 zr 10gbase-zr 10g ethernet.

View Complete Details

Ask Latest Price & Details

Bidi Sfp Transceivers

We are offering bidi sfp transceivers. Eoptolink bidi fast and gigabit ethernet sfp is a compact optical transceiver, module used in optical communications for both telecommunication and data bidirectional communications applications. Features:fiber bi-directional sfp optical transceiversimplex sc or lc connector13101550, 14901550, 13101490, 15101570 or other bosa txrx combination is avalable on request. Up to 160km bidi linkacac coupling according to msarohs compliantcommercial 0 to 70c or industrial -40 to 85c case operation temperature rangeclass 1 laser international safety standard iec 60825 compliantapplication:wdmfast ethernet linksieee 802.3ah 1000base-bx applicationsfibre channel linkseols-bi1312-40-dsmfup to 1.25gbps1310nm1550nmdfbpin40kmlcsccom.ind.dpart no. fiber type data rate range wavelength optical components distance connector case temperature range ddmeols-bi1303-2m-d mmf 100m155mbps 1310nm1550nm fppin 2km lcsc com.ind. deols-bi1503-2m-d mmf 100m155mbps 1550nm1310nm fppin 2km lcsc com.ind. deols-bi1303-15-d smf 100m155mbps 1310nm1550nm fppin 15km lcsc com.ind. deols-bi1503-15-d smf 100m155mbps 1550nm1310nm fppin 15km lcsc com.ind. deols-bi1303-40-d smf 100m155mbps 1310nm1550nm fppin 40km lcsc com.ind. d.

View Complete Details

Ask Latest Price & Details

Bidi Sfp Sdh Sonet

We are offering bidi sfp sdh sonet.The eoptolink's bidi multi-rate series 2.67gbs transceiver module integrates optics and electronics in a small form factor pluggable (sfp) package. It is multisource agreement (msa) compatible and designed for operation at 1310 nm and 1550 nm. Although optimized for oc-48stm-16, it provides multi-rate capabilities and can be used from oc-3stm-1(155 mbs) up to 2.7 gbs. Multirate sfp transceiver provides a fully oc-48 sonet compliant interface between the sonetsdh photonic layer and the electrical layer. Its microprocessor - based modular design implements all features specified in the sfp msa compatible 2-wire serial digital diagnostic monitoring interface for optical transceivers. Oc-48 stm-16 is a network line with transmission speeds of up to 2488.32 mbits (payload: 2405.376 mbits; overhead: 82.944 mbits).Oc-3stm-1 is a network line with transmission speeds of up to 155.52 mbits (payload: 148.608 mbits; overhead: 6.912 mbits, including path overhead) using fiber optics. Depending on the system oc-3 is also known as sts-3 (electrical level) and stm-1 (sdh). These modules are also used for fast ethernet application.Oc-12 or stm-4 is a network line with transmission speeds of up to 622.08 mbits (payload: 601.344 mbits; overhead: 20.736 mbits).Features:1-fiber bi-directional sfp optical transceiversimplex sc or lc connectorup to 2.67 gbs bi-directional data linksmultirate for sonet oc-48 sdh stm-16, fibre channel 1x2x, 1000base, stm-1oc3, stm-4oc12acac coupling according to msasingle +3.3 v power supplyrohs compliant0 to 70c, -10 to 85c, -40 to 85c case operation temperature ranges.Class 1 laser international safety standard iec 60825.

View Complete Details

Ask Latest Price & Details

Dwdm Cfp Transceivers

We are offering Eoptolinks 100G metro DWDM CFP transceiver offers an industry-leading cost optimized solution for metro 100G DWDM transport. Feature: DWDM 100Gbps TransceiverPluggable CFP module compliant to existing CFP blade design10x10 MSA standard compliantC-band, 4 bands each 100GUp to 1600 psnm dispersion toleranceUp to 40km or 80km reach (with no external DCF and no external Optical Amplifier) Application: Router interconnectMesh, Ring and Point to point100G client extensionLow-cost higher density 100G line interfaceHigh density 10 x 10GMetro and Dataenter connections DWDM CFP Wiki Responding to the call by end-users and equipment manufacturers, the 10X10 MSA is established to deliver the industrys lowest cost 100GbE solution over single-mode fiber. The 10X10 MSA is defining a new price and performance trajectory for 100GbE that will significantly accelerate the adoption and economics of 100G deployments. The 10X10 MSA group is backed by a robust ecosystem of end-users, system manufacturers and optical module suppliers including Google, Brocade, JDSU and Santur. DWDM CFP inside: DWDM-CFP-10x10-inside Wavelenght grid for DWDM CFP 10x10 DWDM-CFP-10x10-wavelenght-grid DWDM CFP 10x10 advantages DWDM-CFP-10x10-advantages ****

Additional Information:

Payment Terms : T/T

View Complete Details

Ask Latest Price & Details

Cfp 100g Transceiver Module

We are offering cfp 100g transceiver module. Eoptolink cfp 100gbase-lr4 module supports a link length of 10 kilometers on standard single-mode fiber (smf, g.652). 100 gigabit ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. cfp msa package with duplex lc connector(straightangled)integrated heat sink optionalsupports multi-rate from 103.1gbs to 111.8gbs aggregatelane bit rate 25.78 gbs gbe, 27.95 gbs otu4up to 10km transmission on smfeml laser and pin receiverhigh speed io electrical interface (caui)mdio interface with integrated digital diagnostic monitoringsingle +3.3v power supplymaximum power consumption 16 woperating case temperature: -5c to +70ccompliant to rohs directive 201165eu****

Ask Latest Price & Details

Cfp Transceiver

Min. Order (MOQ) 1 Piece(s)

We are offering cfp transceiver, eoptolink eolc-1640g-10, eolc-1640g-20, eolc-1640g-40 40g cfp transceiver modules are designed for use in 40 gigabit ethernet links over single mode fiber. They are compliant with the cfp msa1 and ieee 802.3ba 40gbase-lr4, 40gbase-er4. Digital diagnostics functions are available via an mdio interface, as specified by the cfp msa. The transceiver is rohs-6 compliant and lead-free per directive 200295ec3. Eatures:supports 41.2gbps aggregate bit ratescwdm dfb laser and pin receiverup to 10km, 20km, 40km transmission on smfsingle 3.3v power supply and power dissipation

Ask Latest Price & Details

Loopback

We are offering loopback, qsfpqsfp+ passive electrical loopback eolq-xlb is used for testing qsfpqsfp+ transceiver ports in board level test. The electrical loopback provides a cost effective low loss method for qsfpqsfp+ port testing. The eolq-xlb is packaged in a standard msa housing compatible with all qsfpqsfp+ ports. Transmit data from the host is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host. It provides an economical way to exercise qsfpqsfp+ ports during r&d validation, production testing, and field testing. The eolq-xlb provides qsfpqsfp+ power class 1, 2, 3 (standard), or 4 loading using a customer supplied +3.3v voltage supply. Featurescustomizable power consumptiondual led indicatorcustom memory mapsbuilt in diagnostic functionssupports 40gbps total data ratehost-pluggable msa footprintfull sff-8436 msa complianttemperature range from 0 to 80cno reference clock requiredcompliant with sonet, sdh, gbe, fcmsa compliant eepromeconomical qsfpqsfp+ port testingcustom memory mapsboard level system testingexcellent signal integrityapplicationqsfp portsystem testingitu-t recommendation g.957 (stm-1, 4 & 16)ethernet ieee 802.3 (gigabit, 10 gigabit and 40 gigabit ethernet) sdr, ddr and qdrsonet, sdh, gbe, fc support, infiniband.

View Complete Details

Ask Latest Price & Details

Qsfp+ Transceiver

Min. Order (MOQ) 1 Piece(s)

We are offering qsfp+ transceiver, eoptolink qsfp+ (quad small form-factor pluggable plus) is a new multi-source agreement (msa) for high speed application, such as 40g-base, which provide four channels of data in one pluggable interface. Each channel is capable of transferring data at 10gbps and supports a total of 40gbps. The 40gbps qsfp+ transceiver is well suited for infiniband and 40gbase-sr4 40gbase-lr4 applications. It combines the higher density attractions of parallel modules with some of the key advantages normally associated with sfp+ based modules. It is intended for use short reach applications in switches, routers and data center equipment where it provides higher density and lower cost when compared with standard sfp+ modules. Application:high-speed interconnects within and between switches, routers and transport equipmentserver-server clusters, super-computing interconnectionsproprietary backplanesinterconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane40gbase-lr4 ethernet links10gbase-sr applications40gbase-sr4 applications40gbase-er4 ethernet linksinfiniband sdr, ddr and qdr applicationsfeatures:qsfp+ msa, sff-8436 compatiblefour independently addressable transmit and receive channelshighly compact: savings of 60% on edge and board usage compared to four comparable sfp+ moduleselectrically hot-pluggablexfp-like latch mechanism for ease-of-insertiondigital diagnostics monitoring interface. Allows customer management and monitoring of key modules parameters, analogous to sfp+optical connectivity via industry standard mpomtp terminated fiber ribbon.

View Complete Details

Ask Latest Price & Details

Common Public Radio Interface

We are offering common public radio interface. The common public radio interface (cpri) standard defines the interface of base stations between the radio equipment controllers (rec) in the standard, to local or remote radio units, known as radio equipment (re). The companies working to define the specification include ericsson ab, huawei technologies co. Ltd, nec corporation, alcatel lucent and nokia siemens networks gmbh & co. Kg. Obsai, which stands for "open base station architecture initiative", is an initiative created by hyundai, lge, nokia, samsung and zte in september 2002 with the aim of creating an open market for cellular base stations. The idea behind this initiative was that an open market would substantially reduce the development effort and costs traditionally associated with creating new base station product ranges. Lte, an initialism of long-term evolution, marketed as 4g lte, is a standard for wireless communication of high-speed data for mobile phones and data terminals. It is based on the gsmedge and umtshspa network technologies, increasing the capacity and speed using a different radio interface together with core network im****

View Complete Details

Ask Latest Price & Details

Video Smpte Sfp Transceiver

We are offering video smpte sfp transceiver. Fiber optic transport of hdsd-sdi it is becoming increasingly necessary and economically feasible to transport hdsd-sdi signals over fiber instead of coaxial cable. The reasons are many including increased bandwidth, lower cabling cost, noise immunity and greater transmission distances. Prior to 2006, several standards were used to define how sdi signals were to be transported over fiber. Now, there is one standard to define the many aspects and parameters of the fiber optic interface for the transmission and reception of sdi over fiber. Smpte 297-2006: this standard defines the fiber optic interface for the transmission and reception of sdi signals at various data rates: smpte 259m: 143 through 360 mbps smpte 344m: 540 mbps smpte 292: 1.485 and 1.4851.001 gbps smpte 424m: 2.97 and 2.971.001 gbps smpte 297-2006 defines many parameters of the optical interface for both a transmitting and receiving device with a fiber optic interface. The input to a fiber transmitter can be any one of the smpte coaxial-based standards indicated above. On the receiver, the output will be of the same coaxial interface type of the transmitter. The significance of the new 297 standard is that it allows for interoperability between fiber optic devices from different manufacturers that comply with the standard.

View Complete Details

Ask Latest Price & Details

Dual Rate Sfp Transceivers

Eoptolink 110G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over SM or MM fiber. They are compliant with SFF-8431, IEEE 802.3-2005 10GBASE-SRSW, 10GBASE-LR and 1000BASE-SX, 1000BASE-LX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Host board designers should follow the IC manufacturer's recommended settings for interoperability with an SFP+ limiting module. his product is for applications specifically designed for 10G SFP+ ports and 1G10GSFP+ ports and not native 1G SFP ports.Features:Hot-pluggable SFP+ footprintSupports rate selectable 1.25 Gbs or 9.95 to 10.3 Gbs bit ratesPower dissipation < 1WRoHS-6 compliant (lead-free)Commercial temperature range 0C to 70CSingle 3.3Vpower supplyUncooled 850nm VCSEL laser or DFB 1310nm laserDuplex LC connectorBuilt-in digital diagnostic functionsApplication:1000BASE-SX 1G Ethernet1000BASE-LX 1G Ethernet10GBASE-SRSW 10G Ethernet10GBASE-LR 10G EthernetOrdering information:Package Part No. Fiber Type Data Rate Range Wavelength Optical Components Distance Range Case Temperature range, C ApplicationSFP+ EOLP-8596-02-M MMF 1G10.3G 850nm VSCELPIN

View Complete Details

Ask Latest Price & Details

Sdh Sonet Sfp Transceiver

Eoptolink SDH SFP+ transceiver is a high performance, cost effective modulse for serial optical data communications applications specified for signal rates of 9.95 Gbs to 11.3 Gbs. The modules are designed for single mode fiber and operates at a nominal wavelength of 85013101550 nm. The transmitter section incorporates uncooled directly modulated 1310 nm distributed feedback laser (DFB) or EML colled laser 1550nm. The receiver section uses PIN photodetector for low dark current and excellent responsivity or APD high sensetivity receiver. CDR chipset is integrated both to transmitter TX and receiver RX side.Features:Supports 9.95Gbs to 11.3Gbs bit ratesSFP 10G with CDR both at TX and RX side.IEC 60825-1 Class 1CDRH Class 1 laser eye safety.Hot-pluggable SFP+ footprintMaximum link length of 80kmDFB or Temperature-stabilized EML TransmitterDuplex LC connectorLow Power dissipationSuperior Thermal and EMI integrity performance to support high port densitiesLC Duplex optical connector interface conforming to ANSI TIAEIA604-10 (FOCIS 10)Built-in digital diagnostic functions, DDMITemperature range -5C to 70C or Indutrial Temperature range on requestRoHS-6, CE, FDA, FCC, TUV, UL certifactesApplication:SONET OC-192 SDH STM-64ITU-T G.70910GBASE-SRLREREWZR10GBASE-SRLREREWZR+ FEC104080 km 10G Fibre Channel104080 km 10G Fibre Channel + FEC

View Complete Details

Ask Latest Price & Details

Sfp Transceiver

Eoptolink SFP+ transceiver are multi-purpose optical modules for 10Gbits data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SANNAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SWSRLRER, 1000 Base-SX Ethernet.Features:Compliant to SFP+ Electrical MSA SFF-8431Compliant to SFP+ Mechanical MSA SFF-8432Multi rate of up to 11.3Gbs10G Ethernet complianceTransmission distance up to 100km (SM fiber)Low power consumption0C to +70C case operating temperature rangeLaser Class 1 IEC CDRH compliantRoHS 66 compliantCompliant with product safety standardsApplication:10GBASE-SR, LR, ER, ZR, ZX at 10.31Gbps10GBASE-LW at 9.95Gbps1000 Base-LX Ethernet8XFC at 8.5Gbps4XFC at 4.25Gpbs2XFC at 2.125Gpbs1xFC at 1.0625GbpsOther optical links

View Complete Details

Ask Latest Price & Details

Sfp+ Transceiver

We are offering sfp+ transceiver, eoptolink 8g sfp series single mode transceiver is small form factor pluggablemodule for optical data communications such as 8g4g2g fibre channel.digital diagnostic functions are available via an i2c series bus specified in the sfp msa sff-8472. Features:duplex, cwdm, dwdm bi-directional sfp optical transceiverup to 8.5 gbps data linkscompliant with sfp+ msacompliant with fibre channel fc-pi-4 800-sm-lccompliant with 4g and 2g fibre channelsff-8472 digital diagnostic functiondistance up to 80 kmacac coupling according to msasingle +3.3 v power supplyrohs compliant0 to 70oc operating or -10 to 85oc operating case temperature range. Class 1 laser international safety standard iec 60825 compliantapplication:8g fibre channel linksordering information:package part no. fiber type data rate range wavelength optical components distance range case temperature range, c applicationsfp+ eolp-8580-02 mmf 8g 850nm vscelpin .

Ask Latest Price & Details

Qsfp+ Aoc Single Fiber Optical Cable

we are offering qsfp+ aoc single fiber optical cable. eoptolink qsfp active optical cable (aoc) eolq-8540g-pct-xx and eolq-8540g-pct-xx*-1 is a high performance integrated cable for short-range multi-lane data communication and interconnect applications. it integrates four data lanes in each direction with 40 gbps aggregate bandwidth. each lane can operate at 10 gbps with lengths ranging from one to 100 m. these active optical cables utilize multimode fiber using a nominal wavelength of 850nm. the electrical interface uses a 38-contact edge type connector. eoptolink is producing qsfp+ to qsfp+ aoc and qsfp+ to four sfp+ aoc.application:infiniband qdr (4 x 10g), ddr (4 x 5g) and sdr (4 x 2.5g) interconnectshigh performance and high productivity computer interconnectsdata aggregation, backplane and proprietary density applicationspci-express, sassata, fibre channel compatible interconnectdatacom and telecom switch and router backplane connections

Ask Latest Price & Details

Gigabit Passive Optical Network Stick

We offer gigabit passive optical network stick.Eoptolink gpon (gigabit passive optical network) stick , eols-gn-25-d and eols-gn-35-d a gpon ont in an msa sfp package. The gpon stick provides a pluggable gpon interface for fttx and wireless backhaul applications with a compact size and lower power consumption. Any standard sgmii ethernet sfp switch port can simply convert to a gpon ont port and interconnect to an existing gpon network with the insertion of this module. It is built in compliance with itu-t g.984 specifications, an industry standard which defines gpon access networks.The gpon stick provides a pluggable gpon onu interface for networking equipment with anuplink sfp receptacle enabling these devices to be deployed in gpon networks for fttx, business services, and wireless backhaul applications. The hosting devices include ethernet switches, routers, wireless base stations, ethernet demarcation devices, remote dslams, home gateways and other customer premises equipment.Application:providing pluggable gpon onuinterface for ethernet switcheswireless backhaul equipmentethernet demarcations, routersother customer premises equipmentfeatures:gpon onu in sfp msa footprintintegrated gpon itu-t g.984 maccompliant to fsan g.984.5 specificationstc layer gem encapsulation modeomci support per itu-t g.9881.244gbps, 1310nm burst mode transmitter2.488gbps, 1490nm continuous mode receiverclass 1 fda and iec60825-1 laser safety compliantoperating case temperature standard: 0c+70cddm.

View Complete Details

Ask Latest Price & Details

Rosa Optical Modules

We are offering rosa optical modules.Optical modules are electronic components that convert an electrical signal to an optical signal simultaneously. Optical modules are categorized into ld (laser diode) modules and pd (photo diode) modules. Optical transceivers are packaged pd and ld modules. These products are the core devices for any optical communication system such as an optical transponder and an onu (optical network unit).Transmission applications featuring:high sensitivitylow dark currentlow capacitancehigh speed responsewide operating temperature range from 40 to 85cavailable in various packages, pigtailed or in receptacles.Eoptolink pin photodiodes for analogue data transmission are designed specifically for catv and other high speed analogue receiver applications. They feature:low inter-modal distortionwide dynamic rangehigh sensitivity at 1310nm and 1550nmlow dark currentlow capacitanceavailable in various packages, pigtailed or in receptacles

Ask Latest Price & Details

Transmitter Optical Sub-assembly

We are offering transmitter optical sub-assembly.Eoptolink offers lasers for digital, analogue, cwdm and supervisory channel applications. Additionally we can supply mini-tosas optimised for sff and sfp designs and various fttx devices.Digital transmissioneconomical un-cooled lasers for digital applications up to 2.5gbpsingaaspinp, smqw lasers (fabry-perot and dfb) for low threshold current (typically 5-8ma)wide temperature operation from -40 to 85c (95c for some lasers)multiple package types available including tocan, transmission optical sub assemblies (tosa), fc and sc receptacle, and pigtaileddesigned to meet telcordia (bellcore) and itu-t requirementslasers for analogue applicationslasers for cwdm applicationsdwdm and supervisory channel lasersmini-tosas -fttx devicesanalogue transmissioneconomical un-cooled lasers designed for return path linksingaaspinp, smqw lasers (fabry-perot and dfb) provide excellent distortion performancewide temperature operation from -40 to 85ccooled high power dfbs for forward path and narrowcast applicationsdesigned to meet telcordia (bellcore) and itu-t requirementscwdm laserseconomical un-cooled lasers designed high speed cwdm links18 wavelengths available (1270nm to 1610nm) 20nm spacingpackage types include tocan, tosa, and pigtaileddesigned to meet telcordia (bellcore) and itu-t requirementsmini-tosasour mini-tosa (transmission optical sub-assembly) is built on a 3.8mm can, designed for use in the small form factor, and small form pluggable msa transceiver modules.

View Complete Details

Ask Latest Price & Details

Sgmii Sfp Transceiver

We are offering sgmii sfp transceiver. Eoptolink sgmii sfp is designed for 100base-fx applications, with build-in phy device supporting sgmii interface. The standard serial id information compatible with sfp msa describes the transceivers capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial cmos eeprom protocol. For further information, please refer to sfp multi-source agreement (msa). Sgmi sfp transceivers are 100base-fx small form-factor pluggable (sfp) fast ethernet interface converter on gigabit sfp ports. ****

Ask Latest Price & Details

Bidi Sfp+ Transceiver

We are offering bidi sfp+ transceiver, eoptolink bidi sfp+ transceivers are designed for bi-directional 10g serial optical data communications such as ieee 802.3ae 10gbase-bx by using 1330(1270nm) transmitter and 1270(1330) nm receiver. The transceiver consists of two sections: the transmitter section uses a multiple quantum well 1330(1270) nm dfb laser and is a class 1 laser compliant according to international safety standard iec 60825. The receiver section uses an integrated 1270(1330) nm detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. Features:one fiber bi-di sfp+ optical transceiver, bidi wdm sfp+up to 10.3 gbps bi-directional data linksfully compliant with sfp+ msacompliant to ieee 802.3ae 10gbase-bxsff-8472 digital diagnostic functionsimplex lc connector1330tx1270rx and 1270tx1330rxdistance up to 10, 20, 40 kmonly required +3.3 v power supplyrohs compliant-5 to 70c operatingapplication:10gbase-bx at 10.3125 gbs10gbase-bx at 9.953 gbs1000 base-lx ethernet8xfc at 8.5gbps4xfc at 4.25gpbs2xfc at 2.125gpbs1xfc at 1.0625gbpspackage part no. fiber type data rate range wavelength optical components distance range case temperature range applicationbidi sfp+, wdm sfp+sfp+ eolp-bi1696-9adl smf 9.9510.3g 1270nm1330nm dfbpin 10km 070 10g, 10gfcsfp+ eolp-bi1696-9dal smf 9.9510.3g 1330nm1270nm dfbpin 10km 070 10g, 10gfc.

View Complete Details

Ask Latest Price & Details

Dwdm Sfp Transceiver

We are offering dwdm sfp transceiver. Dense wavelength division multiplexing (dwdm) small form-factor pluggable (sfp) transceivers provide the high speeds and physical compactness that today's networks require while delivering the deployment flexibility and inventory control that network administrators demand. Our dwdm sfps are available in all 100 ghz or 50ghz c-band wavelengths on the dwdm itu grid. They are designed to multi-source agreement (msa) standards to ensure broad network equipment compatibility. As multirate interfaces they support any protocol from 100 mbps to 4.25 gbps, for 8g10g please see sfp+ category. The eols-16xx-xx transceivers are small form factor pluggable modules for bi-directional serial optical data communications such as 4x2x1x fibre channel, sdhsonet, ethernet applications.the modules are hot pluggable and digital diagnostic functions area vailable via an i2c serial bus specified in the sfp msa sff-8472. The modules meet the requirements of the ieee802.3 gigabit ethernet standard and ansi fibre channel specifications, and are suitable for interconnections in gigabit ethernet and fibre channel environments. Can be used with single fiber dwdm system and dual fiber dwdm system****

View Complete Details

Ask Latest Price & Details

Gigabit Ethernet Passive Optical Network

We are offering gigabit ethernet passive optical network (gepon or epon) is the leading technology being used in fttx (ftth) deployments. pon is different than other optical network topologies in that it is a point to multi-point (p2mp) topology. from the central offices (co) optical line terminal (olt, with sfp gepon transceivermodule) a single strand of fiber goes out to a passive optical splitter where its signal is multiplied to 32(64) different lines. the transmit and receive signals operate on different wavelengths allowing bi-directional operation over a single fiber. anything transmitted from the olt is transmitted to all 32 lines. it is up to the customers system (optical network unit - onu) to determine what packets are for that customer. all other packets are discarded. the pon current standards have defined downstream data rates up to 1.25gbps.# ieee 802.3ah. epon or gepon (ethernet pon) is an ieeeefm standard for using ethernet for packet data.

Ask Latest Price & Details

Gigabit Passive Optical Networks

We are offering gigabit passive optical networks (gpon) is the leading technology being used in fttx (ftth) deployments. Pon is different than other optical network topologies in that it is a point to multi-point (p2mp) topology. From the central offices (co) optical line terminal (olt, with sfp gpon transceivermodule) a single strand of fiber goes out to a passive optical splitter where its signal is multiplied to 64(128) different lines. The transmit and receive signals operate on different wavelengths allowing bi-directional operation over a single fiber. Anything transmitted from the olt is transmitted to all 32 lines. It is up to the customers system (optical network unit - onu) to determine what packets are for that customer. All other packets are discarded. The pon current standards have defined downstream data rates up to 2.5gbps.

Ask Latest Price & Details

Rj Transceiver

We are offering rj transceiver.The eoptlink rj miniature transceiver module is a high performance integrated full duplex data link for bi-directional communication over simgle mode or multimode optical fiber. It has been designed for use in space constrained applications, and offers the mandatory fc compliance commonly provided by sff and sfp transceivers. This optoelectronic transceiver module is a class 1 laser product compliant with fda radiation performance standards, 21 cfr subchapter j. This component is also class 1 laser compliant according to international safety standard iec-825-1en 60825.Industry standard lc connector interfacemetal housingindustrial gradesingle +3.3v power supplyrohs compliantpackage part no. fiber type data rate range wavelength optical components distance conn. case temperature rangerj low profile eolj-8512-02 mmf 1.25gbps 850nm vcselpin 550m lc com.Rj low profile eolj-8512-02-i mmf 1.25gbps 850nm vcselpin 550m lc ind.Rj low profile eolj-1312-10 smf 1.25gbps 1310nm fppin 10km lc com.Rj low profile eolj-1312-10-i smf 1.25gbps 1310nm fppin 10km lc ind.Rj low profile eolj-1312-20 smf 1.25gbps 1310nm fppin 20km lc com.Rj low profile eolj-1312-20-i smf 1.25gbps 1310nm fppin 20km lc ind.Rj low profile eolj-1312-30 smf 1.25gbps 1310nm fppin 30km lc com.Rj low profile eolj-1312-30-i smf 1.25gbps 1310nm fppin 30km lc ind.****

View Complete Details

Ask Latest Price & Details

Loopback

We are offering loopback, cfp 100g passive electrical loopback is used for testing cfp 100g transceiver ports in board level test. By substituting for a full-featured cfp transceiver, the electrical loopback provides a cost effective low loss method for cfp 100g port testing. The cfp-100g-loopback is packaged in a standard msa housing compatible with all cfp ports. Transmit data from the host is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host. It provides an economical way to exercise cfp ports during r&d validation, production testing, and field testingfeatures and application:customizable power consumptiondual led indicatorcustom memory mapsbuilt in diagnostic functionshot-pluggable msa footprinteconomical cfpcfp+ port testingcustom memory mapsboard level system testingpower on validationexcellent signal integrity.

Ask Latest Price & Details

Bosa Optical Modules

We are offering bosa optical modules.Optical modules are electronic components that convert an electrical signal to an optical signal simultaneously. Optical modules are categorized into ld (laser diode) modules and pd (photo diode) modules. Optical transceivers are packaged pd and ld modules. These products are the core devices for any optical communication system such as an optical transponder and an onu (optical network unit). We manufacture and provide the components that are used in optical modules and assemblies, bosa (bidirectional optical sub. Assembly) up to 10g speed rates. For the detailed datasheets, please, contact with us.Ordering information:part no. package series laser type wavelength data rate out put power, mw voltage connector isolation fiber typelaunch receive tx rx trrdl104m373elxhe receptacle dfb 1490nm 1310nm 1.25g 1.25g 0.3-0.5 3.3v lc none nonetrr5104h330atedac receptacle fp 1550nm 1310nm 1.25g 155m 0.3-0.5 3.3v5v st none nonetrr5104h373aledac receptacle fp 1550nm 1310nm 1.25g 1.25g 0.3-0.5 3.3v st none nonetrpd3225cl93fesaahg pigtail dfb 1310nm 1490nm 2.5g 2.5g 1.5-3.0 3.3v scapc single stage smtrp3115ml73etsaaf pigtail fp 1310nm 1490nm 1.25g 1.25g 1-1.59 3.3v scpc none smtrp3204l573alsaaa pigtail fp 1310nm 1550nm 2.5g 1.25g 0.3-0.5 3.3v scapc none sm.

View Complete Details

Ask Latest Price & Details

Qsfp+ Twinax Copper Cable

we are offering qsfp+ twinax copper cable. eolq-40g-clb-x copper qsfp+ cables is 40gbase qsfp+ to qsfp+ direct-attach cable and qsfp+ to four sfp+ cables. they are based on the qsfp+ multi source agreement (msa), and offer customers a wide variety of high-density 40 gigabit ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider transport applications.features:fully compatible with ieee802.3ba and infiniband qdr specificationsallows for 10gbs per channel transmission; aggregate of 40 gbs total bandwidthrobust diecast covers for superior emi shielding effectivenesseeprom for cable signature & system communicationsactively equalized cables enable longer cable lengths or the use of smaller cable diameters for shorter cable lengths30 awg cable sizes available100 ohm differential impedance systemoptimized pcb interface board to minimize crosstalk and insertion losslower power consumption< 1.5wtemperature range: 0 70crohs6 compatibleapplication:serversnetworked storage systemsroutersexternal storage systemshigh performance computing (hpc) applicationsdata center networking

View Complete Details

Ask Latest Price & Details

Converter Module

We are offering converter module. The eoptolink x2 to sfp+ converter module offers investment protection for 10 gigabit ethernet x2 ports of x2 switches by enabling migration from x2 to small form-factor pluggable plus (sfp+) form factor without having to upgrade or replace the switches. This module converts a 10 gigabit ethernet x2 port into a 10 gigabit ethernet sfp+ port. With the x2 to sfp 10g converter module, customers have the flexibility to use the 10 gigabit x2 interface port of a switch with x2 modules or sfp+ modules. This flexibility is critical when the specific type of interface is not available in one or the other form factor or when customers want to use the same form factor for interfaces across multiple platforms deployed in their network. Based on x2 to sfpplus converter eoptolink can produce: bidi x2, cwdm x2, dwdm x2 and common x2. ****cis at eoptolink.com eoptolink at gmail.com3w.sfp-xfp.com skype id: eoptolink-sfp tel: +86-28-67 087 999 direct: +86 15 601 668 099eoptolink technology inc. Ltd. add: no.127 west wulian street, gongxing town, shuangliu county, chengdu city.

View Complete Details

Ask Latest Price & Details

Triplex Onu Transceiver

We are offering eoptolink triplex burst mode onu transceiver is designed to be compliant with the point to multipoint (p2mp, pon) optical network transmission. It is compliant with itu-t g.984.2 standard. The module consists of 1310nm un-cool dfb laser, ingaasinp apd, preamplifer, analog pd and wdm filter in a highly-integrated three-wavelengthoptical sub-assembly, and it receives up to 2.5gbps of continuous data at 1490nm, and transmits 1.25gbps of burst-mode data at 1310nm. It also supports third wavelength to receive analog rf video at 1555nm. The optical rf video receiver consists of a wideband video amplifier that operates from 40mhz to 870mhz, mode is available both for gepon and gpon application.Rohs compliantmodels for gepon and gpon applicationssmf pigtail fiber with scapc connectortx 1310nm rx 1490nm (digital) rx 1555nm (video)supports asymmetrical 2488 mbps downstream and 1244 mbps upstreamsupport industrial temperature operatinglaser class 1 product which comply with the requirements of iec 60825-1 and iec 60825-2ordering information:package part no. data rate range wavelength optical components suitable network application connector ddm applicationtriplex onu eoly-geu-25-d1 1.25gbps 1310t1490r1550r fppin px20+ scapc d px20+ gepon onu, catvtriplex onu eoly-gu-25-d 1.25gbps2.5gbps 1310t1490r1550r dfbapd class b+ scapc d class b+ gpon onu, catvcis

View Complete Details

Ask Latest Price & Details

Test Board

Min. Order (MOQ) 1 Piece(s)
CFP test board CFP2 test board
CFP4 test board QSFP28 test board

We are offering test board, eoptolink 10040g cfp cfp2 cfp4 qsfp28 test board is designed to provide an efficient and easy method of programming and testing 40100g cfp modules. It comes with comes with complete operations software and user manual to enable intuitive testing. Host board is electrically transparent as maximum, allowing a more accurate assessment of the modules' performance. operates up to 11.2 gbps per channel or 25g per channelcfp cfp2 cfp4 qsfp28 host module status and control. Usb controlled. Msa compliant digital diagnostic and monitoring interface (ddmi). 2 status leds indicators with user defined functionality for control signal monitoring and control.

View Complete Details

Ask Latest Price & Details

X2 Test Board

this test board is used for x2, xenpak, xpak modules tests. for more information, please, contact with us.this test board is used for x2, xenpak, xpak modules tests. we are offering x2 test board.

Ask Latest Price & Details

CFP To SFP+ Converter

We are offering cfp to sfp+ converter, the eoptolink cfp to sfp+ converter eolc-40g-pct is supported on 40 gigabit ethernet cfp ports of switches and routers, converting them into 10 gigabit ethernet sfp+ ports. Featuresconverts cfp to 4 channels sfp+ modulessfp+ port supports maximum power dissipationup to 2wcfp converter power dissipation typical .

Ask Latest Price & Details

Bidi Sfp Transceivers

We are offering bidi sfp transceivers. The eoptolink bidi 4g series is small form factor pluggable module for 4x2x1x fibre channel and 1000base-bx gigabit ethernet single fiber communications. It is with the sfp 20-pin connector to allow hot plug capability. The transmitter section uses class 1 laser compliant according to international safety standard iec 60825. The receiver section uses an integrated detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. features:fiber bi-directional sfp optical transceiverup to 4.25 gbscompliant with fibre channel fc-pi 400200100compliant with ieee 802.3ah-2004 1000base-bxsimplex lc connector or sc connectoracac coupling according to msasingle +3.3 v power supplyrohs compliant0 to 70c, -10 to 85c or -40 to 85c case operation temperature rangesclass 1 laser international safety standard iec 60825 compliantpart no. fiber type data rate range wavelength optical components distance rangepower budget connector case temperature range ddmeols-bi1348-m-d mmf 4.25gbps 1310nm1550nm fppin 100m lc com.ind. deols-bi1548-m-d mmf 4.25gbps 1550nm1310nm fppin 100m lc com.ind. deols-bi1348-5-d smf 4.25gbps 1310nm1550nm fppin 5km lc com.ind. deols-bi1548-5-d smf 4.25gbps 1550nm1310nm dfbpin 5km lc com.ind. deols-bi1348-10-d smf 4.25gbps 1310nm1550nm dfbpin 10km lc com.ind. d. ****

View Complete Details

Ask Latest Price & Details

Sfp+ Twinax Copper Cable

we are offering sfp+ twinax copper cable. eoptolink sfp+ direct attach copper cable assemblies provide a cost-effective solution over fiber optics in short reach applications. the design allows for serial data transmission up to 10gbps in each direction. low power consumption helps make the sfp+ copper cable assembly an economical solution for within rack or rack-to-rack applications.features:supports serial data rates up to 10gbpslow costlow power consumptionenhanced emi suppressionpull-to-release retractable pin latch designapplication:switchesnetworking - servers, routers and hubsenterprise storagetelecommunications equipmentnetwork interface cards

Ask Latest Price & Details

Eoptolink Technology Inc. Ltd. CHENGDU, SICHUAN, China

Our Products

Cwdm Sfp Transceiver

Cwdm Single Fiber System

Dwdm Single Fiber System

Cwdm Dual Fiber System

Tunable Dwdm Xfp Transceivers

8g Xfp Transceiver

Xfp Transceiver

Dwdm Xfp Transceiver

Xfp Loopback

Tunable Dwdm Sfp+ Transceiver

Sfp 16g Fibre Channel Transceivers

Dwdm Sfp+ Transceiver

10G Passive Optical Network

Xenpak To Sfp+ Converter Module

Bid Xfp Transceivers

Bidi Sff Transceivers

X2 Transceiver

Bidi Sfp Transceivers

Bidi Sfp Sdh Sonet

Dwdm Cfp Transceivers

Cfp 100g Transceiver Module

Cfp Transceiver

Loopback

Qsfp+ Transceiver

Common Public Radio Interface

Video Smpte Sfp Transceiver

Dual Rate Sfp Transceivers

Sdh Sonet Sfp Transceiver

Sfp Transceiver

Sfp+ Transceiver

Qsfp+ Aoc Single Fiber Optical Cable

Gigabit Passive Optical Network Stick

Rosa Optical Modules

Transmitter Optical Sub-assembly

Sgmii Sfp Transceiver

Bidi Sfp+ Transceiver

Dwdm Sfp Transceiver

Gigabit Ethernet Passive Optical Network

Gigabit Passive Optical Networks

Rj Transceiver

Loopback

Bosa Optical Modules

Qsfp+ Twinax Copper Cable

Converter Module

Triplex Onu Transceiver

Test Board

X2 Test Board

CFP To SFP+ Converter

Bidi Sfp Transceivers

Sfp+ Twinax Copper Cable

Contact Us

Eoptolink Technology Inc. Ltd.
CHENGDU, SICHUAN, China