Enviro Tech Industrial Products

Gandhi Nagar, Delhi

GEMTECH Series 3000 Digital Pressure Gauge

Thank You For Choosing Our Digital Differential Pressure Gauge.Please Read This Manual Before UsingIf You Have Any Doubt About The Use, Please Feel Free To Contact Our Company, We Are Quite Willing To Serve You

MATTERS NEEDING ATTENTION
Please Do Not Modify The Internal Wiring And Lines Of The Digital Differential Pressure Gauge By Your SelfPlease Choose a Safe Area To Install The Digital Differential Pressure Gauge To Prevent High Temperature And Avoid Splashing Of Moisture And Water Droplets When The Battery Voltage Is Low, Please Replace The Battery In Time
RELEVANT MATTERS BEFORE USEDELIVERY INSPECTION

Each Differential Pressure Transmitter is Subject to Strict Quality Control Before Delivery.Product Packaging Adopts Enhanced Anti-Collision Treatment.After Opening The Box, Please Check Whether The Product Caused Damage During The Transportation
APPLICATIONS AND FEATURES

Using High-Precision Sensors And Digital Technology, Can Detect Positive Pressure, Negative Pressure Or Differential PressureCan Be Widely Used To Measure The Pressure Of Fans And Blowers Filter Resistance Wind Speed Furnace Ventilation Pressure Drop Caused By Orifice Plates, Liquid Level In Foaming Systems And Pressure In Booster Or Hydraulic Systems Can Be Used On Medical Equipment To Monitor Blood And Respiratory Pressure Suitable For Embedded Installation, Flat Installation And Other Installation MethodsVarious Measuring RangesNo Moving Parts, Anti-VibrationAccuracy Up To 1%FS, 3%FS(0-60Pa), 2%FS(0-125Pa)Button Function:Zero Calibration, Unit SwitchingSTORAGE AND INSTALLATIONThe Product Should Be Kept In a Dry And Grime Free PlaceStorage Temperature:-10+40Storage Humidity:0%90%.Vibration:20Hz:9.8 m/s2 (1G) max;20Hz50Hz:5.88 m/s2 (0. 6G) MaxAvoid Storing in Corrosive Gas And Liquid Environment.It is Best to Store It Properly Packaged On a Shelf Or TableIf it is Used in an Open Package And It Exceeds 3 Months, The Ambient Temperature Of The Storage Environment Should Not Be Higher Than 30 .This is Because When The Electrolytic Capacitor is Stored Without Electricity, its Characteristics Are Easily Deteriorated When The Ambient Temperature Is Too High.Do Not Leave It For More Than a Year Without ElectricityAmbient Temperature:-10+50 (14104)Ambient Relative Humidity:

series ps pressure snubber

dampens surges, protects pressure instrumentation

designed to protect pressure instrumentation by dampening surges and pulsations and assuring steady average pressure readings. Snubbers are available in a variety of pore sizes for use with gases, water, and oils.

modeldescription

• ps114pressure snubber, for air & gas service, 1/8" npt.
• ps122pressure snubber, for water & oil service, 1/4" npt.
• ps124pressure snubber, for air & gas service, 1/4" npt.
• ps214pressure snubber, for air & gas service, 1/8" npt.
• ps222pressure snubber, for water & oil service, 1/4" npt.
• ps224pressure snubber, for air & gas service, 1/4" npt.
• ps225pressure snubber, for pulsating gas, 1/4" npt.

specifications

• maximum pressure:brass: 10, 000 psi (689 bar), ss: 15, 000 psi (1034 bar).
• filter disc material:aisi 316 ss.
• approx. Micron rating:air & gases: 2-5; water & oils (30-225 ssu): 10.
• dimensions:1/4" npt: 3/4" (19 mm) hex size, 1.5" (38 mm) length.

related products

• series sgl stainless steel industrial pressure gage
• series sgl stainless steel industrial pressure gage
• series sgd & sgt 2.5" stainless steel industrial pressure gage
• series sgd & sgt 2.5

adjustable pressure snubber

protect instruments from pressure spikes or fluid hammer

the adjustable pressure snubbers protect pressure instruments against fluctuations, surges, spikes and fluid hammer. The fine thread adjustable valve allows you to fine tune harmful harmonic vibration from the fluid systems and isolate the instrument from process when service or replacement is necessary. These pressure snubbers are designed to provide fully field adjustable dampening. By using our adjustable pressure snubbers, you will alleviate surges and pulsations to assure steady pressure readings and extend the life of your instrument.

modeldescription

• a-251pressure snubber, brass, 1/4" male/female bspt.
• a-252pressure snubber, brass, 3/8" male/female bspt.
• a-253pressure snubber, brass, 1/2" male/female bspt.
• a-254pressure snubber, brass, 1/4" male/female npt.
• a-255pressure snubber, brass, 3/8" male/female npt.
• a-256pressure snubber, brass, 1/2" male/female npt.
• a-257pressure snubber, 316 ss, 1/4" male/female bspt.
• a-258pressure snubber, 316 ss, 3/8" male/female bspt.
• a-259pressure snubber, 316 ss, 1/2" male/female bspt.
• a-260pressure snubber, 316 ss, 1/4" male/female npt.
• a-261pressure snubber, 316 ss, 3/8" male/female npt.
• a-262pressure snubber, 316 ss, 1/2" male/female npt.

specifications

• service:compatible liquids and gases.
• wetted parts:brass or 316 ss.
• pressure limits:5690 psi (392 bar).
• temperature limits:-4 to 302f (-20 to 150c).
• process connections:see dimensional drawing.
• weight:8.4 oz (238 g).

3000MRS Photohelic Switch

Using solid state technology, the Series 3000MR and 3000MRS Photohelic Switchgages combine the functions of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage employing the durable, time-proven Magnehelic Gage design. Switch setting is easy to adjust with large external knobs on the gage face. Gage reading is unaffected by switch operation - will indicate accurately even if power is interrupted. Solid state design now results in greatly reduced size and weight. Units can be flush mounted in 4-1316" (122 mm) hole or surface mounted with hardware supplied. 3000MR models employ versatile electromechanical relays with gold over silver contacts - ideal for dry circuits. For applications requiring high cycle rates, choose 3000MRS Models with SPST (N.O.) solid state relays. All models provide both low and high limit control and include 18-inch (45 cm) cable assemblies for electrical connections.

Gage accuracy is 2% of full scale and switch repeatability is 1%. Switch deadband is one pointer width - less than 1% of full scale. Compatible with air and other non-combustible, non-corrosive gases, they can be used in systems with pressures to 25 psig (1.725 bar). Optional construction is available for use to either 35 psig (2.42 bar) or 80 psig (5.51 bar).

Included Accessories: mounting ring, snap ring; 18" (45 cm) cable assembly; (2) 316" tubing to 18" NPT adapters; (2) 18" NPT pipe plugs; (4) 6-32 x 1-14" RH machine screws (panel mounting); and (3) 6-32 x 516" RH machine screws (surface mounting).

Product Applications :

• Fan Control
• Damper Control
• Environmental Pollution Control.