Enviro Tech Industrial Products

Gandhi Nagar, Delhi

Aerosense Digital Differential Pressure Gauge Series CDPG

The Series CDPG and CBDPG Digital Differential Pressure Gauge Can Measurepositive, negative or differential Pressure. It Can Completely Replace Traditional Pointer mechanical Gauge. It is available in 24 Volts or Battery Powered Version.All Models are Factory Calibrated to Specific Ranges.

FEATURES:

• Easy to read LCD/LED display provides immediate local alerts allowing Corrective action to be taken quicker to eliminate problem from becoming Widespread.
• Same size as pointer mechanical gauges simplifies field upgradable to digital pressure gauge by reducing install steps.
• Built-in buzzer and backlight, provide sound-light alarm function.

APPLICATIONS :

• It can measure system pressure of fan, blower, filter, furnace draft and orifice plate and can apply to various clean room, biological safety cabinet, clean bench, dust collection systems, medical or pharmaceutical machine, etc.

TRI2 Tridicator Gage

Series TRI2 Tridicator Gage

Combination Pressure/Temperature Gage

The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank.

California Residents: Click Here for Proposition 65 WARNING.

ModelDescription

• TRI2-100-25E0 to 100 psi (0 to 700 kPa), 1/4" back mount with ext. shank
• TRI2-100-500 to 100 psi (0 to 700 kPa), 1/2" back mount
• TRI2-200-25E0 to 200 psi (0 to 1400 kPa), 1/4" back mount with ext. shank
• TRI2-200-500 to 200 psi (0 to 1400 kPa), 1/2" back mount
• TRI2-200-50L0 to 200 psi (0 to 1400 kPa), 1/2" bottom mount
• TRI2-60-500 to 60 psi (0 to 400 kPa), 1/2" back mount
• TRI2-60-50L0 to 60 psi (0 to 400 kPa), 1/2" bottom mount

Specifications

• Service:Compatible gases and liquids.
• Wetted Materials:Brass connection and phosphor bronze Bourdon tube.
• Housing:Drawn steel, black finish.
• Accuracy:Pressure 3-2-3%; Temperature 1 scale division.
• Temperature Range:All models: 80 to 290F (30 to 140C).Temperature Limits:Ambient: -40 to 250F (-40 to 120C);
• Process: 80 to 290F (30 to 140C).
• Pressure Limits:FS range.
• Size:3" (76 mm).
• Process Connections:1/2" male NPT back or bottom, 1/4" male NPT back connection.
• Weight:12.35 oz (350 g) center back mount and lower mount;

14.11 oz (400 g) center back mount with extension shank

Accessories

Model Number Description

• NISTCAL-PG1NIST traceable pressure calibration certificate for pressure gages over 1% accuracy. NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
• NISTCAL-TGNIST traceable temperature calibration certificate.

NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.

Digital Pressure Gauge

Series DPG Digital Pressure Gage

0.25% or 0.5% F.S. Accuracy, NEMA 4X (IP66) Aluminum Housing

Replace your outdated analog gages with the new Series DPG Digital Pressure Gage. The Series DPG has a high 0.25% or 0.5% full-scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units.

ModelDescription

• DPG-000Digital pressure gage, selectable engineering units: -14.70-0 psi, -1.033 kg/cm, -1.013 bar, -29.93" Hg, -33.94 ft w.c., -101.4 kPa, -235.2 oz/in, -407.3" w.c., -1013 mbar, -1034 cm w.c., -760.7 mm Hg.
• DPG-002Digital pressure gage, selectable engineering units: 15.00 psi, 1.055 kg/cm, 1.034 bar, 30.54" Hg, 34.61 ft w.c., 103.4 kPa, 240 oz/in, 415.2" w.c., 1034 mbar, 1055 cm w.c., 775.7 mm Hg.
• DPG-003Digital pressure gage, selectable engineering units: 30.00 psi, 2.109 kg/cm, 2.069 bar, 61.08" Hg, 69.21 ft w.c., 206.9 kPa, 480 oz/in, 830.4" w.c., 2069 mbar, 2109 cm w.c., 1551 mm Hg.
• DPG-004Digital pressure gage, selectable engineering units: 50.00 psi, 3.515 kg/cm, 3.448 bar, 101.8" Hg, 115.4 ft w.c., 344.8 kPa, 800 oz/in, 1384" w.c., 3448 mbar, 3515 cm w.c., 2586 mm Hg.
• DPG-005Digital pressure gage, selectable engineering units: 100.0 psi, 7.03 kg/cm, 6.895 bar, 203.6" Hg, 230.7 ft w.c., 689.5 kPa, 1600 oz/in, 2768" w.c., 6895 mbar, 7031 cm w.c., 5172 mm Hg.
• DPG-006Digital pressure gage, selectable engineering units: 200.0 psi, 14.06 kg/cm, 13.79 bar, 407.2" Hg, 461.4 ft w.c., 1379 kPa, 3200 oz/in, 5536" w.c.
• DPG-007Digital pressure gage, selectable engineering units: 300.0 psi, 21.09 kg/cm, 20.69 bar, 610.8" Hg, 692.1 ft w.c., 2069 kPa, 4800 oz/in, 8304" w.c.
• DPG-008Digital pressure gage, selectable engineering units: 500.0 psi, 35.15 kg/cm, 34.48 bar, 1018" Hg, 1154 ft w.c., 3448 kPa, 8000 oz/in.
• DPG-009Digital pressure gage, selectable engineering units: 1000 psi, 70.3 kg/cm, 68.98 bar, 2036" Hg, 2307 ft w.c., 6895 kPa.
• DPG-010Digital pressure gage, selectable engineering units: 3000 psi, 210.9 kg/cm, 206.9 bar, 6108" Hg, 6921 ft w.c.
• DPG-011Digital pressure gage, selectable engineering units: 5000 psi, 351.5 kg/cm, 344.8 bar.
• DPG-020Digital pressure gage, range 30" Hg-0-15 psi.
• DPG-102Digital pressure gage, selectable engineering units: 15.00 psi, 1.055 kg/cm, 1.034 bar, 30.54" Hg, 34.61 ft w.c., 103.4 kPa, 240 oz/in, 415.2" w.c., 1034 mbar, 1055 cm w.c., 775.7 mm Hg, CE and FM approved.
• DPG-103Digital pressure gage, selectable engineering units: 30.00 psi, 2.109 kg/cm, 2.069 bar, 61.08" Hg, 69.21 ft w.c., 206.9 kPa, 480 oz/in, 830.4" w.c., 2069 mbar, 2109 cm w.c., 1551 mm Hg, CE and FM approved.
• DPG-104Digital pressure gage, selectable engineering units: 50.00 psi, 3.515 kg/cm, 3.448 bar, 101.8" Hg, 115.4 ft w.c., 344.8 kPa, 800 oz/in, 1384" w.c., 3448 mbar, 3515 cm w.c., 2586 mm Hg, CE and FM approved.

Industrial Pressure Gauge

Series SGA Gages are perfect for applications where resistance to corrosion is necessary. The stainless steel case and ring offer excellent protection from harsh processes and the gage can be easily filled in the field for vibration or pulsation applications. The SGA gages are an economical choice where ambient corrosion and vibration are a concern. Also, this line is suitable for all fluids that are compatible with brass.

Other Details:

• SGA-B0221N1.5 ??0-15 psiLowerSGA-B1021N1.5 ??0-600 psiLowerSGA-C0621N2 ??0-160 psiLower
• SGA-B0321N1.5 ??0-30 psiLowerSGA-B1121N1.5 ??0-800 psiLowerSGA-C0721N2 ??0-200 psiLower
• SGA-B0421N1.5 ??0-60 psiLowerSGA-B1221N1.5 ??0-1000 psiLowerSGA-C0821N2 ??0-300 psiLower
• SGA-B0521N1.5 ??0-100 psiLowerSGA-B1321N1.5 ??0-1500 psiLowerSGA-C0921N2 ??0-400 psiLower
• SGA-B0621N1.5 ??0-160 psiLowerSGA-C0221N2 ??0-15 psiLowerSGA-C1021N2 ??0-600 psiLower
• SGA-B0721N1.5 ??0-200 psiLowerSGA-C0321N2 ??0-30 psiLowerSGA-C1121N2 ??0-800 psiLower
• SGA-B0821N1.5 ??0-300 psiLowerSGA-C0421N2 ??0-60 psiLowerSGA-C1221N2 ??0-1000 psiLower
• SGA-B0921N1.5 ??0-400 psiLowerSGA-C0521N2 ??0-100 psiLowerSGA-C1321N2"0-1500 psiLo

Specifications

• Service:Compatible gases and liquids.
• Wetted Materials:Brass.
• Housing Material:304 SS.
• Lens:Plastic.
• Accuracy:1.6% Full scale.
• Pressure Limits:Full scale range.
• Temperature Limits:0 to 150F (17 to 65C).
• Size:1.5" (40 mm) or 2" (50 mm).
• Process Connection:1/8" NPT.
• Weight:1.8 oz (51 g) or 4.3 oz (122 g).

Related Products

• Series SGB Stainless Steel Industrial Pressure Gage
• Series L Lubricator
• Series FRL Filter, Regulator and Lubricator
• Series SG1 1.5" Industrial Pressure Gage

weatherproof digital pressure gauge

series wdg weatherproof digital pressure gage

0.5% fs accuracy, weatherproof, economic plastic housing

the series wdg weatherproof digital pressure gage measures gas and liquid pressure with high accuracy at an affordable price. Its rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The wdg comes with 304l stainless steel wetted material for a wide range of compatible liquids and gases.

calibration option available under accessories.

we are in the process of discontinuing this series, the suggested replacement is series dpga/dpgb.

product applications

• pneumatic
• draft measurement
• filter monitoring
• industrial
• outdoor
• hvac roof-top
• flow

modeldescription

• wdg-01weatherproof digital gage, range 0-50 psig.

specifications

• service:compatible liquids and gases.
• wetted material:304l ss.
• housing materials:fiberglass reinforced pp plastic.
• accuracy:0.5% fs for ranges up to 1000 psig (68.94 bar); 1% fs for 5000 psig (344.74 bar) range.
• long term stability:0.05% fs/year.
• pressure limits:2x pressure range; burst pressure: 3x pressure range.
• enclosure rating:ip65.
• temperature limits:14 to 140f (-10 to 60c).
• thermal effect:0.04% fs/c.
• size:2.5" od.
• process connections:1/4" male npt.
• display:4-digit lcd (1-1/4 x 5/8").
• power requirements:3 v lithium metal battery, installed functional, user replaceable.
• battery life:2 to 3 years typ.
• weight:0.34 lb (0.15 kg).

accessories

model numberdescription

• nistcal-pg2nist traceable pressure calibration certificate for pressure gages under 1% accuracy. note: equal certs will be charged per units purchased.

related products

• series dpg digital pressure gage
• series dpg digital pressure gage
• series dpga & dpgw digital pressure gage with 1% accuracy
• series dpga & dpgw digital pressure gage with 1% accuracy

Brass Digital Pressure Gauge

Model BDG-01 Brass Digital Pressure Gage

0.5% FS Accuracy, Brass Wetted Parts

The Model BDG-01 Brass Digital Pressure Gage measures gas pressure with 0.5% of full-scale accuracy at an affordable price. With brass wetted material, the series BDG is designed for your specific applications of compatible gases. Its design allows for easy installation. User-selectable units of measure let one gage be used for various pressure scales.

Calibration Option available under Accessories.

California Residents: Click Here for Proposition 65 WARNING.

Product Applications

• Pneumatic
• Draft measurement
• Filter monitoring
• IndustrialOutdoor
• HVAC roof-top
• Flow

ModelDescription

• BDG-01Brass digital pressure gage, range 0 to 150 psig, 10.342 Bar, 1.034 mPa and 10.545 kg/cm2.

Specifications

• Service:Compatible gases.
• Wetted Materials:Brass and silicone sensor.
• Housing Materials:ABS plastic.
• Accuracy:0.5% FS.
• Long Term Stability:0.05% FS per year.
• Pressure Limits:2X pressure range; Burst pressure: 3X pressure range.
• Enclosure Rating:IP10.
• Temperature Limits:14 to 140F (- 10 to 60C).
• Thermal Effect:0.04% FS per C.
• Size:2.5" OD.
• Process Connection:1/4" male NPT.
• Display:4-digit LCD (1-1/4 x 5/8").
• Power Requirements:3 V CR123A lithium metal battery, installed functional, user replaceable.
• Battery Life:2 to 3 years typ.
• Weight:0.29 lb (0.13 kg).

Features

• Brass wetted materials for use with compatible gases
• Backlit display provides easy viewing of gage measurement
• Selectable units provide readings in easily recognizable units for user
• Well-suited gage for application designs specifying simple operation and accuracy
• Rugged weatherproof enclosure enables a range of use outdoor or indoor where water is present

Accessories
Model NumberDescription

• NISTCAL-PG2NIST traceable pressure calibration certificate for pressure gages under 1% accuracy. NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.

Digital Pressure Gauge With 1% Accuracy

Series DPGA & DPGW Digital Pressure Gage with 1% Accuracy

Economic Gage With Selectable Engineering Units, Rubber Boot

The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.

The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases.

ModelDescription

• DPGA-00Digital pressure gage, range 30" Hg to 0 psi, selectable engineering units: -14.70 psig, -1.033 kg/cm, -1.013 bar, -29.93" Hg, -33.94 ft w.c., -101.4 kPa, -235.2 oz/in, -407.3" w.c., -1013 mbar, -1034 cm w.c., -761 mm Hg, 0.01 psi resolution.
• DPGA-04Digital pressure gage, range 0 to 5 psi, selectable engineering units: 5.000 psig, .3515 kg/cm, .3447 bar, 10.18" Hg, 11.53 ft w.c., 34.47 kPa, 80.0 oz/in, 138.4" w.c., 344.7 mbar, 351.5 cm w.c., 258.6 mm Hg, 0.002 psi resolution.
• DPGA-05Digital pressure gage, range 0 to 15 psi, selectable engineering units: 15.00 psig, 1.055 kg/cm, 1.034 bar, 30.54" Hg, 34.60 ft w.c., 103.4 kPa, 240.0 oz/in, 415.2" w.c., 1034 mbar, 1055 cm w.c., 776 mm Hg, 0.01 psi resolution.
• DPGA-06Digital pressure gage, range 0 to 30 psi, selectable engineering units: 30.00 psig, 2.109 kg/cm, 2.068 bar, 61.1" Hg, 69.2 ft w.c., 206.8 kPa, 480.0 oz/in, 830" w.c., 2068 mbar, 2109 cm w.c., 1551 mm Hg, 0.01 psi resolution.
• DPGA-07Digital pressure gage, range 0 to 50 psi, selectable engineering units: 50.00 psig, 3.515 kg/cm, 3.447 bar, 101.8" Hg, 115.3 ft w.c., 344.7 kPa, 800 oz/in, 1384" w.c., 3447 mbar, 3515 cm w.c., 2586 mm Hg, 0.02 psi resolution.
• DPGA-08Digital pressure gage, range 0 to 100 psi, selectable engineering units: 100.0 psig, 7.03 kg/cm, 6.89 bar, 203.6" Hg, 230.7 ft w.c., 689 kPa, 1600 oz/in, 2768" w.c., 0.1 psi resolution.
• DPGA-09Digital pressure gage, range 0 to 200 psi, selectable engineering units: 200.0 psig, 14.06 kg/cm, 13.79 bar, 407.2" Hg, 461.3 ft w.c., 1379 kPa, 3200 oz/in, 0.1 psi resolution.
• DPGA-10Digital pressure gage, range 0 to 300 psi, selectable engineering units: 300.0 psig, 21.09 kg/cm, 20.68 bar, 611" Hg, 692 ft w.c., 2068 kPa, 4800 oz/in, 0.1 psi resolution.
• DPGA-11Digital pressure gage, range 0 to 500 psi, selectable engineering units: 500.0 psig, 35.15 kg/cm, 34.47 bar, 1018" Hg, 1153 ft w.c., 3447 kPa, 0.2 psi resolution.
• DPGA-12Digital pressure gage, range 30" Hg-0-100 psi.
• DPGW-00Digital pressure gage, range 30" Hg to 0 psi, selectable engineering units: -14.70 psig, -1.033 kg/cm, -1.013 bar, -29.93" Hg, -33.94 ft w.c., -101.4 kPa, -235.2 oz/in, -407.3" w.c., -1013 mbar, -1034 cm w.c., -761 mm Hg, 0.01 psi resolution.
• DPGW-04Digital pressure gage, range 0 to 5 psi, selectable engineering units: 5.000 psig, .3515 kg/cm, .3447 bar, 10.18" Hg, 11.53 ft w.c., 34.47 kPa, 80.0 oz/in, 138.4" w.c., 344.7 mbar, 351.5 cm w.c., 258.6 mm Hg, 0.002 psi resolution.
• DPGW-05 Digital pressure gage, range 0 to 15 psi, selectable engineering units: 15.00 psig, 1.055 kg/cm, 1.034 bar, 30.54" Hg, 34.60 ft w.c., 103.4 kPa, 240.0 oz/in, 415.2" w.c., 1034 mbar, 1055 cm w.c., 776 mm Hg, 0.01 psi resolution.

series sg5 contractor gage

large, easy-to-read dial, internal surge suppressor

the series sg5 contractor gages are ideally manufactured for contractors because of their large dial and compact design. Since the gages are lightweight and slim, they are easy to transport. The large 4.5" scale makes them simple to read. The series sg5 gages possess psi scales with 1% full-scale accuracy. The gages are made with a stainless steel housing and brass wetted parts. Units can withstand temperatures of -4 to 140f (-20 to 60c). These qualities make the sg5 series perfect for contractors and industrial applications. A wide offering of ranges are available from full vacuum to 300 psi.

calibration option available under accessories.

california residents: click here for proposition 65 warning.

product applications

• contractor applications
• industrial applications

model description

• sg5-g0122n4.5" contractor gage, 30" hg to 0, 1/4" npt bottom connection
• sg5-g0322n4.5" contractor gage, 0 to 30 psi, 1/4" npt bottom connection
• sg5-g0422n4.5" contractor gage, 0 to 60 psi, 1/4" npt bottom connection
• sg5-g0522n4.5" contractor gage, 0 to 100 psi, 1/4" npt bottom connection
• sg5-g0622n4.5" contractor gage, 0 to 160 psi, 1/4" npt bottom connection
• sg5-g0722n4.5" contractor gage, 0 to 200 psi, 1/4" npt bottom connection
• sg5-g0822n4.5" contractor gage, 0 to 300 psi, 1/4" npt bottom connection

specifications

• service:compatible gases and liquids.
• wetted materials:brass connection, bronze tube.
• housing:304 ss.
• lens:plastic.
• accuracy:1% fs.
• pressure limits:full scale range.
• temperature limits:-4 to 140f (-20 to 60c).
• size:4.5" (115 mm).
• process connections:1/4" male npt.
• weight:10.4 oz (295 g).

features

• stainless steel housing resists ambient corrosion for longer service life in harsh environments
• high accuracy gage for applications requiring more precise measurement
• lightweight and slim, yet large easy to read gage make them easy to carry and read
• specified with high ambient temperature rating means more robust uses and longer service-life

accessories

model numberdescription

• nistcal-pg1nist traceable pressure calibration certificate for pressure gages over 1% accuracy. Note: equal certs will be charged per units purchased

ultrasonic thickness gauge

model utg ultrasonic thickness gage

ideal for use with ultrasonic flow transmitters, adjustable sound velocity

the model utg ultrasonic thickness gage measures the thickness of a variety of materials. The utg works on a variety of parallel surface material ranging from 0.05 to 7.9" (1.2 to 200 mm).

product applications

• pipe thickness measurement
• finding wall thickness
• monitoring corrosion in closed vessels
• industrial applications
• automotive
• hvac
• plumbing

modeldescription

• utgultrasonic thickness gage

specifications

• service:steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, pvc, gray cast iron, nodular cast iron, other. Selectable option for special materials with known sound propagation rate.*
• range:0.047 to 7.874" (1.2 to 200 mm).
• accuracy:0.5%.
• resolution:0.001" / 0.1 mm.
• sound velocity:1118 to 20132 mph (500 to 9000 m/s).
• temperature limits:32 to 122f (0 to 50c).
• humidity limit:< 80%.
• display:4 digits, 0.394" (10 mm) lcd.
• power requirement:(4) 1.5 v aaa alkaline batteries, not included, user replaceable.
• weight:5.78 oz (164 g).
• agency approvals:ce.

features

• non-invasive thickness measurement
• reads in inches or millimeters and features an adjustable sound velocity to allow for an array of materials to be measured
• allows the user to find the wall thickness of the pipe when programming an ultrasonic transmitter without cutting or removing a section of the pipe to measure it
• ideal for monitoring corrosion in closed vessels such as boilers and chemical tanks and with any ultrasonic flow transmitter

accessories

model numberdescription

• a-186silicone-based grease acoustic couplant, 3 oz tube.
• a-188silicone-free acoustic couplant, 4 oz tube.
• a-197silicone based rtv acoustic couplant, 2.8 oz

related products

• series uxf2 ultrasonic flow converter
• series uxf2 ultrasonic flow converter
• series uxf3 ultrasonic flowmeter converter
• series uxf3 ultrasonic flowmeter converter
• series ufb ultrasonic flowmeter set
• series ufb ultrasonic flowmeter set
• series ufc ultrasonic flowmeter set
• series ufc ultrasonic flowmeter set
• series pub portable ultrasonic flowmeter kit
• series pub portable ultrasonic flowmeter kit
• series puf portable ultrasonic flowmeter kit
• series puf portable ultrasonic flowmeter kit
• model ufm compact ultrasonic flowmeter
• model ufm compact ultrasonic flowmeter

Setra 370 Digital Pressure Gauge

Part Number: Setra 370

Categories: Pressure Instruments, Pressure Transducers / Transmitters

Setra 370 Features

• 0.02% Full-Scale Accuracy
• High Resolution 6 Digit LCD Display for
• Pressure or Altitude Monitoring
• Bidirectional RS-232 Digital
• Communications I/O Port
• Engineering Unit Conversions for Pressure and Altitude
• Digital Altimeter Setting Indicator (DASI) and Corrected Altimeter Mode
• Programmable Non-Linear Functions

Introduction

Setra Model 370 high-precision digital manometer is a multi-function measuring instrument with a microprocessor that combines Setras SETRACERAM sensing components, advanced digital circuitry, and proven firmware to achieve system accuracy of better than 0.02. %FS. The Model 370 uses a 6-digit LCD display to display pressure and data. It can also output this data via a bidirectional EIA-232 interface. The function keys and numeric keys on the panel make it easy to convert engineering units and record minimum/maximum values. A value set the high and low alarm point and baud rate, perform calibration, etc. The above functions can also be completed through the communication interface. The Model 370 can output data in three different ways depending on the users needs; continuous output, intermittent output, output on request. The Model 370 also offers a choice of rechargeable battery packs, so it can be used not only as a laboratory instrument but also as a portable precision pressure gauge and field calibrator.

Applications

• Automatic weather station
• Pressure transfer reference
• Laboratory or product process monitoring
• Pressure chamber

Advantages

• Accuracy 0.02% FS
• High-resolution 6-digit LCD display for pressure or height monitoring
• Bidirectional RS-232 digital transmission
• Pressure units and height units can be converted
• Digital altimeter adjustment indicator (DASI), correct altimeter mode
• Programmable nonlinear function

digital differential pressure and flow gauges

the digimag series dm-1000 digital differential pressure and flow gages monitor the pressure of air and compatible gases just as its famous analog predecessor the magnehelic differential pressure gage. All models are factory calibrated to specific ranges. The 4-digit lcd can display readings in common english and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

specification:

• accuracy : 1% fs including linearity, hysteresis and repeatability; 2% fs for ranges 1" w.c. And below.
• thermal effect : 0.05% fs/f typ.; 0.10% fs/f typ. For ranges 1" w.c. And below.
• display update : selectable for 1 second, 10 minutes or update only from button push.
• pressure limits : normal and bi-directional ranges 5 in w.c. And lower = 2 psi (13.7 kpa); normal and bi-directional ranges 10 in w.c. And higher = 11 psi (75 kpa).
• selectable engineering units : in w.c., psi, kpa, pa, mm w.c., mbar, in hg, mm hg, fs (0-100% fs).
• power requirements : 9v battery, included, user replaceable or external power supply 9-24 vdc.
• battery service life : battery life depending on the display update setting: 150 hours (typical) if display update = 1 second; 9 months (typical) if display update = 10 minutes; 1.5 years (typical) if display update is disabled. Battery may last up to four times longer when using lithium-based battery ultralife u9vl-j.

features:

• field programmed reduces installation time
• user selectable parameters for pressure, air velocity or flow permits same device for multiple applications
• specialized filter set point for alerts when maintenance is due
• security levels permit matches the correct access to right skill

applications:

• filter monitoring
• air velocity or flow
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

other details:

modeldescription

• dm-1102digimag differential digital pressure gage, range 0-0.25" w.c.
• dm-1103digimag differential digital pressure gage, range 0-0.5" w.c.
• dm-1104digimag differential digital pressure gage, range 0-1" w.c.
• dm-1105digimag differential digital pressure gage, range 0-2" w.c.
• dm-1107digimag differential digital pressure gage, range 0-5" w.c.
• dm-1108digimag differential digital pressure gage, range 0-10" w.c.
• dm-1109digimag differential digital pressure gage, range 0-15" w.c.
• dm-1110digimag differential digital pressure gage, range 0-25" w.c.
• dm-1111digimag differential digital pressure gage, range 0-50" w.c.
• dm-1112digimag differential digital pressure gage, range 0-100" w.c.
• dm-1122digimag differential digital pressure gage, range 0.25-0-0.25" w.c.
• dm-1123digimag differential digital pressure gage, range 0.5-0-0.5" w.c.
• dm-1124digimag differential digital pressure gage, range 1-0-1" w.c.
• dm-1125digimag differential digital pressure gage, range 2-0-2" w.c.
• dm-1127digimag differential digital pressure gage, range 5-0-5" w.c.
• dm-1128digimag differential digital pressure gage, range 10-0-10" w.c.

Series 7000B Spirahelic Direct Drive Pressure Gage

4-1/2" Turret Mount Gage, ASME Grades A & 2A

Series 7000B Spirahelic Direct Drive Pressure Gages with turret mount housings feature a triple coil spiral/helical wound Bourdon tube to provide dependable service. Bourdon tube design eliminates gears, springs, linkages and complex movements which can wear and cause inaccuracy or early failure. Series 7000B gages come standard with a dual-size 1/2" male NPT and 1/4" female NPT process connection.

California Residents: Click Here for Proposition 65 WARNING.

Product Applications

• Systems with high cycle rates
• Process with problematic pressure surges and spikes
• Environmental with continuous vibration shock

ModelDescription

• 7100B-G100Direct drive pressure gage, range 100 psig.
• 7112B-G100Direct drive pressure gage, range 100 psig.
• 7112B-G160Direct drive pressure gage, range 160 psig.
• 7112B-GC010Direct drive pressure gage, range 1000 psig.
• 7112B-GC030Direct drive pressure gage, range 3000 psig.

Specifications

• Service:Compatible gases & liquids.
• Wetted Materials:Grade A accuracy: Inconel X-750 alloy Bourdon tube, nickel plated brass connection block.
• Grade 2A accuracy: Inconel X-750 alloy Bourdon tube, type 316L SS connection block.
• Housing:Black polycarbonate case and clear acrylic cover.
• Accuracy:Grade A (2%-1%-2%); Grade 2A (0.5% F.S.).
• Pressure Limit:150% of full scale. Gage will maintain its specifications for overpressures up to 150% maximum range. Normal operation should be between 25% and 75% of full scale.
• Temperature Limits:-65 to 180F (-53.9 to 82.2C).
• Size:4-1/2" (114.3 mm) dial face - Design conforms to ASME B40.1.
• Process Connections:Dual size 1/2" male NPT x 1/4" female NPT, bottom connections.
• Weight:18.2 oz (516 g).

Features

• Direct drive design with single moving part maximizes lifespan and accuracy without the need to recalibrate
• Elastic Bourdon tube resists overpressure and returns to original setting
• Blowout hole prevents early failure from high overpressure conditions
• Single element sensing means total lower cost of ownership because of long service life and lower cost to maintain

Related Products

• Series DPG-200 Digital Pressure Gage
• Series DPG-200 Digital Pressure Gage
• Series 626 & 628 Industrial Pressure Transmitter
• Series 626 & 628 Industrial Pressure Transmitter
• Series 765 Process Gage with Dampened Movement

series 250-af inclined manometer air filter gages

precision machined, solid acrylic plastic gages, accurate to 1% of full scale

dwyer durablock series 250-af inclined manometer air filter gages are precision machined 1" thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to .0002" to assure life-long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150f. Connection fittings are positively sealed but easily removed for zeroing or addition of fluid.

economy model 452-af is similar to the 250 series except they are not equipped with over pressure traps. Two a-324 1/4" compression fittings are included with each gage but not shown. Bodies are of 5/8" thick acrylic and scales are mirror polished, epoxy coated aluminum.

product applications

• air filter gage

model description

• 209-afinclined air filter gage, range .20-0-3.0" w.c., 5-1/2" inclined scale,
• 250.5-afinclined air filter gage, range .10-0-1.0" w.c., 8" inclined scale,
• 250-afinclined air filter gage, range .10-0-1.0" w.c., 5-1/2" inclined scale,
• 251-afinclined air filter gage, range .05-0-.50" w.c., 5-1/2" inclined scale,
• 252-afinclined air filter gage, range .20-0-2.0" w.c., 8" inclined scale,
• 350-afinclined air filter gage, range 0-4" w.c., 4-1/2" inclined scale
• 451-afinclined air filter gage, range 0-1" w.c., 8" inclined scale
• 452-afinclined air filter gage, range 0-2" w.c., 8" inclined scale, 2 psi max. Pressure.

specifications

for architects and engineers

• an air filter gage for measuring the resistance to air flow through the filters shall be installed, one for each bank of filters. The gage shall be of inclined tube differential type (equipped with vent valves for zeroing) shall be of solid acrylic plastic construction with built-in level vial (and over pressure safety traps 250 series only), shall have an adjustable mirror-polished scale, shall be furnished complete with two 5-foot lengths 1/4" tubing, two static pressure tips, mounting hardware, additional bottle of red gage fluid and instructions.

features

• high accuracy and easy to use, making it a dependable device for many years of service
• easy to read polished inclined scale allows minute pressure differences to be read
• no moving parts mean no calibration or nothing to wear out

related products

• series dh digihelic differential pressure controller
• series 2000 magnehelic differential pressure gages
• series 2-5000 minihelic ii differential pressure gage
• series 475 intrinsically safe handheld digital manometer
• series dhii digihelic differential pressure controller
• series 476a single pressure & series 478a digital manometer
• series dh3 digihelic differential pressure controller

Series DPG Digital Pressure Gage

0.25% or 0.5% F.S. Accuracy, NEMA 4X (IP66) Aluminum Housing

Replace your outdated analog gages with the new Series DPG Digital Pressure Gage. The Series DPG has a high 0.25% or 0.5% full-scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units.

Product Applications

• Process Applications, Replacement For Legacy Analog Gages, OEM Applications

ModelDescription

• DPG-000Digital pressure gage, selectable engineering units: -14.70-0 psi, -1.033 kg/cm, -1.013 bar, -29.93" Hg, -33.94 ft w.c., -101.4 kPa, -235.2 oz/in, -407.3" w.c., -1013 mbar, -1034 cm w.c., -760.7 mm Hg.
• DPG-002Digital pressure gage, selectable engineering units: 15.00 psi, 1.055 kg/cm, 1.034 bar, 30.54" Hg, 34.61 ft w.c., 103.4 kPa, 240 oz/in, 415.2" w.c., 1034 mbar, 1055 cm w.c., 775.7 mm Hg.
• DPG-003Digital pressure gage, selectable engineering units: 30.00 psi, 2.109 kg/cm, 2.069 bar, 61.08" Hg, 69.21 ft w.c., 206.9 kPa, 480 oz/in, 830.4" w.c., 2069 mbar, 2109 cm w.c., 1551 mm Hg.
• DPG-004Digital pressure gage, selectable engineering units: 50.00 psi, 3.515 kg/cm, 3.448 bar, 101.8" Hg, 115.4 ft w.c., 344.8 kPa, 800 oz/in, 1384" w.c., 3448 mbar, 3515 cm w.c., 2586 mm Hg.
• DPG-005Digital pressure gage, selectable engineering units: 100.0 psi, 7.03 kg/cm, 6.895 bar, 203.6" Hg, 230.7 ft w.c., 689.5 kPa, 1600 oz/in, 2768" w.c., 6895 mbar, 7031 cm w.c., 5172 mm Hg.
• DPG-006Digital pressure gage, selectable engineering units: 200.0 psi, 14.06 kg/cm, 13.79 bar, 407.2" Hg, 461.4 ft w.c., 1379 kPa, 3200 oz/in, 5536" w.c.
• DPG-007Digital pressure gage, selectable engineering units: 300.0 psi, 21.09 kg/cm, 20.69 bar, 610.8" Hg, 692.1 ft w.c., 2069 kPa, 4800 oz/in, 8304" w.c.
• DPG-008Digital pressure gage, selectable engineering units: 500.0 psi, 35.15 kg/cm, 34.48 bar, 1018" Hg, 1154 ft w.c., 3448 kPa, 8000 oz/in.
• DPG-009Digital pressure gage, selectable engineering units: 1000 psi, 70.3 kg/cm, 68.98 bar, 2036" Hg, 2307 ft w.c., 6895 kPa.
• DPG-010Digital pressure gage, selectable engineering units: 3000 psi, 210.9 kg/cm, 206.9 bar, 6108" Hg, 6921 ft w.c.
• DPG-011Digital pressure gage, selectable engineering units: 5000 psi, 351.5 kg/cm, 344.8 bar.
• DPG-020Digital pressure gage, range 30" Hg-0-15 psi.
• DPG-102Digital pressure gage, selectable engineering units: 15.00 psi, 1.055 kg/cm, 1.034 bar, 30.54" Hg, 34.61 ft w.c., 103.4 kPa, 240 oz/in, 415.2" w.c., 1034 mbar, 1055 cm w.c., 775.7 mm Hg, CE and FM approved.
• DPG-103Digital pressure gage, selectable engineering units: 30.00 psi, 2.109 kg/cm, 2.069 bar, 61.08" Hg, 69.21 ft w.c., 206.9 kPa, 480 oz/in, 830.4" w.c., 2069 mbar, 2109 cm w.c., 1551 mm Hg, CE and FM approved.

at2605 atex approved 605 differential pressure

the atex approved series at2605 indicating transmitter provides for both visual monitoring and electronic control of very low differential pressure in hazardous locations. The easily read dial gage is complimented by the two-wire, 4 to 20 ma control signal utilizing the time-proven dwyer magnehelic gage mechanical design and series 600 transmitter technology. The two-wire design simplifies any 4 to 20 ma control loop powered by a 10 to 35 vdc supply. Flame-proof atex enclosures are available in aluminum and can include a glass window for viewing process pressure on gage face.

important notes for installation: : cables must be fitted through 1/2" npt cable gland or atex conduit (not supplied with instrument), open cover only after de-energizing instrument.

a3000 photohelic pressure switch gages

photohelic switch gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven magnehelic gage design. The photohelic switchgage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000s models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, dpdt relays are included for lowhigh limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. Up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).

photohelic sensing - how it works

in typical applications, these dwyer switchgages control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its dpdt slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation.

relay-transformer features

a plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.

product applications : air conditioner systems, clean rooms, fume exhaust systems

300 durablock solid plastic stationary gage

series 200 & 300 durablock solid plastic stationary gage

suitable for total pressures up to 100 psig, temperatures up to 150f, accuracy 2% of full scale (1% on models 215, 244, 246 only)

dwyer series 200 & 300 solid plastic stationary gages, or draft gages, are offered in inclined and vertical (well-type) styles for highly accurate laboratory or general industrial service, for measurement of low range gas and air pressures, positive, negative or differential. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by dwyer's years of experience in the fabrications of acrylic instruments.

product applications

• low pressure laboratory and industrial service applications

modeldescription

• 200.5 solid plastic stationary gage, range .10-0-1.0" w.c., .01 minor div., 8-1/4" scale, 3 lb 11 oz.
• 201solid plastic stationary gage, range .05-0-.50" w.c., .01 minor div., 5-1/2" scale, 2 lb 12 oz.
• 202.5 solid plastic stationary gage, range .20-0-2.0" w.c., .01 minor div., 8-3/4" scale, 4 lb 7 oz.
• 209solid plastic stationary gage, range .20-0-3.0" w.c., .02 minor div., 8-3/4" scale, 4 lb 11 oz.
• 215solid plastic stationary gage, range .05-0-.25" w.c., .005 minor div., 6" scale, 2 lb 14 oz.
• 244solid plastic stationary gage, range 0-4" w.c., .02 minor div., 13-1/4" scale, 9 lb 11 oz.
• 246solid plastic stationary gage, range 0-6" w.c., .02 minor div., 20" scale, 13 lb 14 oz.
• 300solid plastic stationary gage, range 0-4" w.c., .10 minor div., 4-1/2" scale, 2 lb 5 oz.
• 306solid plastic stationary gage, range 0-6" w.c., .10 minor div., 7-3/4" scale, 3 lb 3 oz.
• 308solid plastic stationary gage, range 0-8" w.c., .10 minor div., 9" scale, 3 lb 7 oz.
• 310solid plastic stationary gage, range 0-10" w.c., .10 minor div., 11-1/8" scale, 3 lb 10 oz.

features

• 1" thick acrylic plastic body is a solid block, virtually unbreakable, stable and free of the danger of distortion.
• drilled bore accurate to .0002" free of bends or crooks, will not require recalibration because of distortion.
• selected gage fluid with high wetability characteristics forms a consistent, well shaped meniscus for most accurate readability.
• adjustable reflective polished aluminum scales with thumbscrew locking for easy zeroing.
• parallax-free reading for maximum accuracy and consistency is achieved by simply aligning the meniscus with its image reflected in the scale.
• over-pressure safety traps prevent loss of fluid due to over range pressures or surges in pressure. (not required on no. 215.)
• leveling adjustment for inclined style gages is achieved by simply loosening a locking thumb screw on the side or bottom of the gage, adjusting with reference to the integral sensitive ground glass bubble level and retightening.
• heavy gage steel mounting panels are gray hammerloid finished.
• precision built assures device meets the highest standards

Series 7000 Spirahelic Direct Drive Pressure Gage

Panel Mount, 4-1/2" & 8-1/2" Dials, ASME Grades 2A & 3A

The Series 7000 Spirahelic Pressure Gages employ a unique triple helix Bourdon tube for precision measurement of compatible gases and liquids. The direct drive design reduces friction and mass, resulting in exceptionally good responsiveness, repeatability and accuracy. Because there are no gears, springs, linkages or other complicated mechanisms, wear is practically eliminated. The Series 7000 has solid brass or 316 stainless steel connection block features convenient dual 1/4" female NPT ports-one each on back and bottom. Block also includes integral filter plug to keep dirt out. Safety is assured with solid front case design and rear blowout hole. Gages fit ASME standard panel cutouts, 4.94" (125 mm) -7100; 6.5" (165.1 mm) -7300. The Series 7000B Spirahelic Direct Drive Pressure Gages comes with turret mount housings and standard with a dual-size 1/2" male NPT and 1/4" female NPT process connection.

California Residents: Click Here for Proposition 65 WARNING.

Product Applications

• Systems with high cycle rates
• Processes with problematic pressure surges and spikes
• Environments with continuous vibration or shock

Models & Ordering

ModelDescription

• 7100-G300Direct drive pressure gage, range 0-300 psig.

Specifications

• Service:Compatible gases & liquids.
• Wetted Materials:Inconel X-750 alloy Bourdon tube, type 316L SS connection block.
• Housing:Black polycarbonate case and clear acrylic cover.
• Accuracy:Grade 2A (0.5% FS).
• Pressure Limit:150% of full scale. Gage will maintain its specifications for overpressures up to 150% maximum range. Normal operation should be between 25% and 75% of full scale.
• Temperature Limits:-65 to 180F (-53.9 to 82.2C).
• Sizes:4-1/2" dial face (114.3 mm), 8-1/2" dial face (215.9 mm) - Design conforms to ASME B40.1.
• Process Connections:Two 1/4" female NPT field selectable back or bottom connection.
• Weight:4-1/2" dial face: 16.3 oz (462.1 g); 8-1/2" dial face: 27.3 oz (773.9 g).
• Standard Accessory:One 1/4" male NPT stainless steel plug.

Features

• Direct drive design with single moving part maximizes lifespan and accuracy without the need to recalibrate
• Elastic Bourdon tube resists overpressure and returns to original setting
• Blowout hole prevents early failure from high overpressure conditions
• Single element sensing means total lower cost of ownership because of long service life and lower cost to maintain

Accessories

Model NumberDescription

• A-341Brass adapter, 1/4" male NPT to G 1/2 A (per ISO 228/1) parallel thread 2-1/2" length.

Related Products

• Series DPG-200 Digital Pressure Gage
• Series DPG-200 Digital Pressure Gage
• Series 626 & 628 Industrial Pressure Transmitter
• Series 626 & 628 Industrial Pressure Transmitter
• Series 765 Process Gage with Dampened Movement

capsuhelic differential pressure gages

the capsuhelic gage is designed to give fast, accurate indication of differential pressures. The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure.

using the basic design of dwyer's time-proven magnehelic gage, the capsuhelic gage contains a simple, frictionless movement that permits full scale readings as low as 0.5 in w.c. The pressure being measured is held within a capsule which is an integral part of the gage. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c.

the diaphragm-actuated capsuhelic gage requires no filling liquid which might limit its outdoor applications. Zero and range adjustments are made from outside the gage, and there is no need to disassemble the gage in normal service.

note: may be used with hydrogen. Order a buna-n diaphragm. Pressures must be less than 35 psi.

differential pressure piston gage

the series ptgd differential pressure piston-type gage can be used to measure the pressure drop across filters, strainers, pump performance testing, and heat exchanger pressure drop monitoring. Its simple, rugged design possesses weather and corrosion resistant gage front with a shatter resistant lens. The series ptgd contains a piston-sensing element which provides different differential pressure ranges with full-scale accuracies of 2%. Constructed with aluminum or 316ss and available with two 14" female npt end connections, the series ptgd provides over-range protection rated to 3000 psig (200 bar) or 6000 psig (400 bar) depending on model. Standard models come with in-line connections. Back or bottom connections are also available.

Sensocon Differential Pressure Gauge

We are one step ahead of our competitors in manufacturing and supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure, Fan and Blower Pressure.

Specifications

• Accuracy 2%
• Mounts in Industry
• Type : Arrow indicator
• Die Cast Aluminum Housing
• Standard Holes
• Temperature : 20 to 140 F

series dpgab digital pressure gauge

series dpgab & dpgwb 0.5% digital pressure gage

selectable engineering units, rubber boot

the series dpgwb/dpgab pressure gages offer 0.5% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical gages. The dpgwb stainless steel wetted material makes it suitable for a wide variety of liquids or gases. The gages feature user-selectable units of measure allowing one gage to be used for a variety of pressure scales. The dpgwb/dpgab come with a protective rubber boot to protect against short drops and rough handling.

product applications

• ideal for checking line pressures at system startup.
• process applications
• process start-up
• oem applications

modeldescription

• dpgab-00digital pressure gage w/ boot, range -15 to 0 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgab-04digital pressure gage w/ boot, range 0-5 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgab-05digital pressure gage w/ boot, range 0-15 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgab-06digital pressure gage w/ boot, range 0-30 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgab-07digital pressure gage w/ boot, range 0-50 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgab-08digital pressure gage w/ boot, range 0-100 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgab-09digital pressure gage w/ boot, range 0-200 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgab-10digital pressure gage w/ boot, range 0-300 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgab-11digital pressure gage w/ boot, range 0-500 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-00digital pressure gage w/ boot, range -15-0 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-04digital pressure gage w/ boot, range 0-5 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-05digital pressure gage w/ boot, range 0-15 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-06digital pressure gage w/ boot, range 0-30 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-07digital pressure gage w/ boot, range 0-50 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-08digital pressure gage w/ boot, range 0-100 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-09digital pressure gage w/ boot, range 0-200 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-10digital pressure gage w/ boot, range 0-300 psi with 4-digit display, 0.5% accuracy, battery powered.
• dpgwb-11digital pressure gage w/ boot, range 0-500 psi with 4-digit display, 0.5% accuracy, battery powered.

specifications

• service:> dpgab: air and compatible gases;
• dpgwb: liquids and compatible gases.
• wetted materials:> dpgab: 316l ss, silicone sensor;
• dpgwb: type 316l ss.
• housing materials:abs plastic.

series wdg weatherproof digital pressure gage

0.5% fs accuracy, weatherproof, economic plastic housing

the series wdg weatherproof digital pressure gage measures gas and liquid pressure with high accuracy at an affordable price. Its rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The wdg comes with 304l stainless steel wetted material for a wide range of compatible liquids and gases.

calibration option available under accessories.

we are in the process of discontinuing this series, the suggested replacement is series dpga/dpgb.

product applications

• pneumatic
• draft measurement
• filter monitoring
• industrial
• outdoor
• hvac roof-top
• flow

model description

• wdg-01weatherproof digital gage, range 0-50 psig.

specifications

• service:compatible liquids and gases.
• wetted material:304l ss.
• housing materials:fiberglass reinforced pp plastic.
• accuracy:0.5% fs for ranges up to 1000 psig (68.94 bar); 1% fs for 5000 psig (344.74 bar) range.
• long term stability:0.05% fs/year.
• pressure limits:2x pressure range; burst pressure: 3x pressure range.
• enclosure rating:ip65.
• temperature limits:14 to 140f (-10 to 60c).
• thermal effect:0.04% fs/c.
• size:2.5" od.
• process connections:1/4" male npt.
• display:4-digit lcd (1-1/4 x 5/8").
• power requirements:3 v lithium metal battery, installed functional, user replaceable.
• battery life:2 to 3 years typ.
• weight:0.34 lb (0.15 kg).

accessories

model numberdescription

• nistcal-pg2nist traceable pressure calibration certificate for pressure gages under 1% accuracy.
• note: equal certs will be charged per units purchased.

2-5000 minihelic ii differential pressure gages

combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our minihelic ii gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The minihelic ii gage is designed for panel mounting in a single 2-58" diameter hole. Standard pressure connections are barbed fittings for 316" id tubing; optional 18" male npt connections are also available. Over-pressure protection is built into the minihelic ii gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost.

with the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the minihelic ii gage make it well-suited for a wide variety of oem and user applications. Oem applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the minihelic ii gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The minihelic ii gage is suitable for many of the same applications as the magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the magnehelic gage are not required.

product applications: : room positive pressure sensing, local indication on filter status, face velocity on fume hood, duct pressures.

series dpga & dpgw digital pressure gauge

series dpga & dpgw digital pressure gage with 1% accuracy

economic gage with selectable engineering units, rubber boot

the series dpga is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the dpga is the perfect choice for digitally monitoring the pressures of air and compatible gases.

the series dpgw is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the dpgw is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases.

product applications

process applications, process start-up, oem applications

model description

• dpga-00digital pressure gage, range 30" hg to 0 psi, selectable engineering units: -14.70 psig, -1.033 kg/cm, -1.013 bar, -29.93" hg, -33.94 ft w.c., -101.4 kpa, -235.2 oz/in, -407.3" w.c., -1013 mbar, -1034 cm w.c., -761 mm hg, 0.01 psi resolution.
• dpga-04digital pressure gage, range 0 to 5 psi, selectable engineering units: 5.000 psig, .3515 kg/cm, .3447 bar, 10.18" hg, 11.53 ft w.c., 34.47 kpa, 80.0 oz/in, 138.4" w.c., 344.7 mbar, 351.5 cm w.c., 258.6 mm hg, 0.002 psi resolution.
• dpga-05digital pressure gage, range 0 to 15 psi, selectable engineering units: 15.00 psig, 1.055 kg/cm, 1.034 bar, 30.54" hg, 34.60 ft w.c., 103.4 kpa, 240.0 oz/in, 415.2" w.c., 1034 mbar, 1055 cm w.c., 776 mm hg, 0.01 psi resolution.
• dpga-06digital pressure gage, range 0 to 30 psi, selectable engineering units: 30.00 psig, 2.109 kg/cm, 2.068 bar, 61.1" hg, 69.2 ft w.c., 206.8 kpa, 480.0 oz/in, 830" w.c., 2068 mbar, 2109 cm w.c., 1551 mm hg, 0.01 psi resolution.
• dpga-07digital pressure gage, range 0 to 50 psi, selectable engineering units: 50.00 psig, 3.515 kg/cm, 3.447 bar, 101.8" hg, 115.3 ft w.c., 344.7 kpa, 800 oz/in, 1384" w.c., 3447 mbar, 3515 cm w.c., 2586 mm hg, 0.02 psi resolution.
• dpga-08digital pressure gage, range 0 to 100 psi, selectable engineering units: 100.0 psig, 7.03 kg/cm, 6.89 bar, 203.6" hg, 230.7 ft w.c., 689 kpa, 1600 oz/in, 2768" w.c., 0.1 psi resolution.
• dpga-09digital pressure gage, range 0 to 200 psi, selectable engineering units: 200.0 psig, 14.06 kg/cm, 13.79 bar, 407.2" hg, 461.3 ft w.c., 1379 kpa, 3200 oz/in, 0.1 psi resolution.
• dpga-10digital pressure gage, range 0 to 300 psi, selectable engineering units: 300.0 psig, 21.09 kg/cm, 20.68 bar, 611" hg, 692 ft w.c., 2068 kpa, 4800 oz/in, 0.1 psi resolution.
• dpga-11digital pressure gage, range 0 to 500 psi, selectable engineering units: 500.0 psig, 35.15 kg/cm, 34.47 bar, 1018" hg, 1153 ft w.c., 3447 kpa, 0.2 psi resolution.
• dpga-12digital pressure gage, range 30" hg-0-100 psi.
• dpgw-00digital pressure gage, range 30" hg to 0 psi, selectable engineering units: -14.70 psig, -1.033 kg/cm, -1.013 bar, -29.93" hg, -33.94 ft w.c., -101.4 kpa, -235.2 oz/in, -407.3" w.c., -1013 mbar, -1034 cm w.c., -761 mm hg, 0.01 psi resolution.
• dpgw-04digital pressure gage, range 0 to 5 psi, selectable engineering units: 5.000 psig, .3515 kg/cm, .3447 bar, 10.18" hg, 11.53 ft w.c., 34.47 kpa, 80.0 oz/in, 138.4" w.c., 344.7 mbar, 351.5 cm w.c., 258.6 mm hg, 0.002 psi resolution.

series lpg5 2.5" low pressure gage

theseries lpg5 low pressure gagesoffer top of the line performance for pressure applications from 10 in. W.c. To 10 psi. The lpg5 gages possess dual scales with 3-2-3% full-scale accuracy on a2.5" dial.units are made with a chrome plated steel housing and brass wetted parts. Units can withstand temperatures of -4 to 140f (-20 to 60c). This series is meant for the measurement of low pressures of gases and liquids and is ideal for air flow indication, liquid level and draft measurement.series lpg5 gagesare available with either a bottom or back connection option.

calibration option available under accessories.

california residents: click here for proposition 65 warning.

product applications

• air flow indication
• liquid level
• draft measuremen

model description

• lpg5-d0022n2.5"low pressure gage, dual range 0-10 psi(0-70 kpa), bottom connection
• lpg5-d0042n2.5" low pressure gage, dual range 0-10 psi(0-70 kpa), back connection
• lpg5-d8022n2.5" low pressure gage, dual range 0-10" w.c.(0-2.5 kpa), bottom connection
• lpg5-d8042n2.5" low pressure gage, dual range 0-10" w.c.(0-2.5 kpa), back connection
• lpg5-d8122n2.5" low pressure gage, dual range 0-15" w.c.(0-3.75 kpa), bottom connection
• lpg5-d8142n2.5" low pressure gage, dual range 0-15" w.c.(0-3.75 kpa), back connection
• lpg5-d8222n2.5" low pressure gage, dual range 0-35" w.c.(0-8.75 kpa), bottom connection
• lpg5-d8242n2.5" low pressure gage, dual range 0-35" w.c.(0-8.75 kpa), back connection
• lpg5-d8422n2.5" low pressure gage, dual range 0-60" w.c.(0-15 kpa), bottom connection
• lpg5-d8442n2.5" low pressure gage, dual range 0-60" w.c.(0-15 kpa), back connection
• lpg5-d8622n2.5" low pressure gage, dual range 0-100" w.c.(0-25 kpa), bottom connection
• lpg5-d8642n2.5" low pressure gage, dual range 0-100" w.c.(0-25 kpa), back connection
• lpg5-d8822n2.5" low pressure gage, dual range 0-200" w.c.(0-50 kpa), bottom connection
• lpg5-d8842n2.5" low pressure gage, dual range 0-200" w.c.(0-50 kpa), back connection
• lpg5-d9922n2.5" low pressure gage, dual range 0-5 psi(0-35 kpa), bottom connection
• lpg5-d9942n2.5" low pressure gage, dual range 0-5 psi(0-35 kpa), back connection

specifications

• service:compatible gases and liquids.
• wetted materials:brass connection, bronze tube.
• housing:chrome plated steel.
• lens:polycarbonate.
• accuracy: 3-2-3% fs.
• pressure limits:full scale range.
• temperature limits:-4 to 140f (-20 to 60c).
• size:2.5" (63 mm).
• process connections:1/4" male npt.
• weight:8 oz (227g).

features

• chrome plated steel housing and brass wetted parts resist ambient for longer service life in harsh environments
• low pressure gage provides a selection to meet specific applications
• specified with high ambient and process temperature ratings mean more robust uses and longer service-life
• good accuracy gage for value-sensitive applications requiring more precise measurement and where vibration is a concern

Series LPG4 Low Pressure Gage

1.5% Full Scale Accuracy in a 2.5" Gage

OurSeries LPG4 gagesoffer top of the line performance and accuracy for pressure and vacuum applications up to and including 160 in w.c. The LPG4 is constructed from a single beryllium-copper diaphragm affixed to a precision-machined brass plate. This innovative design, together with a high-precision, milled-teeth brass movement and nickel-silver pinion and bearing surface, provide the user with a top of the line low pressure instrument.

Calibration Option available under Accessories.

California Residents: Click Here for Proposition 65 WARNING.

Product Applications

• Air flow indication
• Liquid level
• Draft measurement

ModelDescription

• LPG4-D7122NLow pressure gage, range -10-0" w.c. (-2.5-0 kPa).
• LPG4-D7222NLow pressure gage, range -15-0" w.c. (-3.75-0 kPa).
• LPG4-D7322NLow pressure gage, range -25-0" w.c. (-6-0 kPa).
• LPG4-D7422NLow pressure gage, range -40-0" w.c. (-10-0 kPa).
• LPG4-D7522NLow pressure gage, range -60-0" w.c. (-15-0 kPa).
• LPG4-D7622NLow pressure gage, range -80-0" w.c. (-20-0 kPa).
• LPG4-D7722NLow pressure gage, range -100-0" w.c. (-25-0 kPa).
• LPG4-D7822NLow pressure gage, range -160-0" w.c. (-40-0 kPa).
• LPG4-D7922NLow pressure gage, range -235-0" w.c. (-60-0 kPa).
• LPG4-D8022NLow pressure gage, range 0-10" w.c. (0-2.5 kPa).
• LPG4-D8122NLow pressure gage, range 0-15" w.c. (0-3.75 kPa).
• LPG4-D8222NLow pressure gage, range 0-25" w.c. (0-6 kPa).
• LPG4-D8322NLow pressure gage, range 0-40" w.c. (0-10 kPa).
• LPG4-D8422NLow pressure gage, range 0-60" w.c. (0-15 kPa).
• LPG4-D8522NLow pressure gage, range 0-80" w.c. (0-20 kPa).
• LPG4-D8622NLow pressure gage, range 0-100" w.c. (0-25 kPa).
• LPG4-D8722NLow pressure gage, range 0-160" w.c. (0-40 kPa).
• LPG4-D8922NLow pressure gage, range -4-0-6" w.c. (-1-0-1.5 kPa).
• LPG4-D9022NLow pressure gage, range -6-0-10" w.c. (-1.5-0-2.5 kPa).
• LPG4-D9122NLow pressure gage, range -8-0-16" w.c. (-2-0-4 kPa).
• LPG4-D9322NLow pressure gage, range -24-0-40" w.c. (-6-0-10 kPa).
• LPG4-D9422NLow pressure gage, range -30-0-50" w.c. (-7.5-0-12.5 kPa).

Specifications

• Service:Compatible gases & liquids.
• Wetted Materials:Brass and beryllium copper.
• Housing:Drawn steel, black finish.
• Lens:Polycarbonate (removable).
• Accuracy:1.5% FS.
• Pressure Limit:100% of range scale.
• Temperature Limits:Process: -40 to 160F (-40 to 70C); Ambient: -40 to 140F (-40 to 60C).
• Size:2.5" (63 mm)
• Process Connections:1/4" male NPT.
• Enclosure Rating:NEMA 3 (IP54).
• Weight:7.3 oz (0.21 kg).

Features

• Low pressure gage provides a selection to meet specific applications
• Specified with high ambient and process temperature ratings mean more robust uses and longer service-life
• High accuracy gage for applications requiring more precise measurement is a concern

Accessories

Model NumberDescription

• NISTCAL-PG1NIST traceable pressure calibration certificate for pressure gages over 1% accuracy. NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED

Model DTG Digital Tire Pressure Gage

1 psi Accuracy, Durable

This product is no longer available, see Model HTG-01 for a replacement product.

California Residents: Click Here for Proposition 65 WARNING

The Model DTG-01 Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. With 1% FS accuracy, the DTG reads psi, bar and kPa with the ease of one-button operation. A protective rubber casing stands up against rough handling and short drops

Specifications

• Service:Compatible gases.
• Wetted Materials:Nickel plated brass; Rubber o-ring; Silicon.
• Housing Material:ABS plastic; Silicon rubber boot.
• Accuracy:1% FS.
• Pressure Range:2 to 100 psi (0.15 to 6.90 bar).
• Enclosure Rating:IP10.
• Temperature Limits:0 to 100F (-17.8 to 37.8C).
• Process Connection:Tire valve stem or equivalent.
• Display:3-1/2 digit, 1/4" LCD.
• Shutoff:90 seconds.
• Power Requirements:(1) 3 V CR2032 Lithium metal battery, installed functional, user replaceable.
• Battery Life:2000 hours.
• Weight:0.25 lb (0.11 kg).

Series DCGII Digital Calibration Pressure Gage

0.05% FS Accuracy, 316 SS Wetted Parts

The Series DCGII Digital Calibration Pressure Gage offers a complete pressure gage with calibration capabilities. With a precise 0.05% full scale accuracy and large 5 digit resolution, this gage can be used in critical industrial applications where precision is most important. This versatile gage only requires one 9V battery or power adapter and can operate up to 5, 000 working hours. The Series DCGII 0.05% Digital Pressure Gage can display percent of range, pressure swings or alarm set points. This pressure gage comes complete with eleven selectable pressure units, backlight and zeroing capability.

Calibration Option available under Accessories.

• Product Applications
• Field gage calibration
• Permanent installation
• Burst disc testing
• Torque data logging
• Pressure regulator testing and hydrostatic leak testing

Model Description

• DCGII-100 Digital pressure gage, range -14.7-0 psig, 0.05% FS, 1/2" SS male npt
• DCGII-101 Digital pressure gage, range 0-15 psig, 0.05% FS, 1/2" SS male npt
• DCGII-102 Digital pressure gage, range 0-30 psig, 0.05% FS, 1/2" SS male npt
• DCGII-103 Digital pressure gage, range 0-60 psig, 0.05% FS, 1/2" SS male npt
• DCGII-104 Digital pressure gage, range 0-100 psig, 0.05% FS, 1/2" SS male npt
• DCGII-105 Digital pressure gage, range 0-200 psig, 0.05% FS, 1/2" SS male npt
• DCGII-106 Digital pressure gage, range 0-300 psig, 0.05% FS, 1/2" SS male npt
• DCGII-107 Digital pressure gage, range 0-500 psig, 0.05% FS, 1/2" SS male npt
• DCGII-109 Digital pressure gage, range 0-2000 psig, 0.05% FS, 1/2" SS male npt

Specifications

• Service:Compatible, non-combustible liquids and gases.
• Wetted Materials:316 SS.
• Other Materials:Housing: Aluminum alloy; Display: Acrylic MR200; Buttons: Silicon gel; Back plate: 304 SS; Back seal: Oil-proof latex.
• Accuracy:0.05% FS; 1 least significant digit.
• Temperature Accuracy:1C.
• Pressure Limits:120% FS.
• Temperature Limits:14 to 122F (-10 to 50C).
• Compensated Limits:32 to 122F (0 to 50C).
• Process Connection:1/2" male NPT.
• Display:5-digit LCD with blue backlight.
• Power Requirements:9 V alkaline battery, not included, or power adapter accessory.
• Battery Life:Up to 10, 000 hours (600 working hours @ default 3 times/s).
• Auto Shut-off:Backlight: On/off, 10 s, 20 s, 30 s.
• Weight:1.28 lb (0.58 kg).
• Agency Approvals:CE.

Features

Indicator can display percent of range, pressure swings or alarm set points

Minimum and maximum peak detection

Selectable 10, 20, or 30 second backlight

Temperature indication

Eleven selectable pressure units

Stainless steel 1/2" male NPT connection

• Highest accuracy provides exceptional measurement for calibration minimizing costly out of specification conditions
• Stainless steel housing resists ambient corrosion for longer service life in harsh environments

Model HTG Handheld Digital Tire Pressure Gage

1 psi Accuracy, Handheld Design

The Model HTG-01 Handheld Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. Its lightweight, handheld design makes it portable and user friendly with its one button operation. A backlit 1/4" LCD display and illuminated tip ensures easy visibility in low light. The Series HTG also displays three different units of psi, bar and kPa with the push of a button.

ModelDescription

• HTG-01Handheld tire gage, range 2 to 100 psig, 0.15 to 6.9 Bar and 15 to 690 kPa.

Specifications

• Service:Compatible gases.
• Wetted Materials:ABS plastic; Rubber o-ring; Silicon.
• Housing Material:ABS plastic.
• Accuracy:1% FS.
• Pressure Range:2 to 100 psi (0.15 to 6.90 bar).
• Enclosure Rating:IP10.
• Temperature Limits:32 to 104F (0 to 40C).
• Process connection:Tire valve stem or equivalent.
• Display:3-1/2 digit, 1/4" backlit LCD.
• Shutoff:90 seconds.
• Power Requirements:(4) 1.5 V LR44 alkaline batteries, installed functional, non-replaceable.
• Battery Life:2000 hours.
• Weight:0.10 lb (0.05 kg).

Features

• Rubberized Grip
• Rugged Design
• One Button Operation
• Reads Pressure in psi, bar and kPa

Series SGX & SGF Stainless Steel Low Pressure Gage

Brass or 316 SS Wetted Parts

The Series SGX/SGF Stainless Steel Low Pressure Gages have dual English/metric scales with 1.6% full scale accuracy. The Series SGX/SGF gages are designed with 304 SS housings and brass or 316 SS wetted parts. Units can withstand ambient temperatures up to 149F (65C) and process temperatures up to 212F (100C). Ranges of vacuum, compound and pressures to 235" w.c. are available. Included on the dial is a convenient zero adjustment screw which allows the user to easily re-zero the needle.

Calibration Option available under Accessories.

California Residents: Click Here for Proposition 65 WARNING.

Product Applications

• Pneumatic
• Draft Measurement
• Filter Monitoring
• Liquid Level

ModelDescription

• SGF-D7122NStainless steel low pressure gage, range -10-0" w.c. (-250-0 mm).
• SGF-D7322NStainless steel low pressure gage, range -25-0" w.c. (-600-0 mm).
• SGF-D7522NStainless steel low pressure gage, range -60-0" w.c. (-1600 mm).
• SGF-D7722NStainless steel low pressure gage, range -100-0" w.c. (-2500-0 mm).
• SGF-D8122NStainless steel low pressure gage, range 0-15" w.c. (0-400 mm).
• SGF-D8222NStainless steel low pressure gage, range 0-25" w.c. (0-600 mm).
• SGF-D8322NStainless steel low pressure gage, range 0-40" w.c. (0-1000 mm).
• SGF-D8422NStainless steel low pressure gage, range 0-60" w.c. (0-1600 mm).
• SGF-D8622NStainless steel low pressure gage, range 0-100" w.c. (0-2500 mm).
• SGF-D8722NStainless steel low pressure gage, range 0-160" w.c. (0-4000 mm).
• SGX-D7122NStainless steel low pressure gage, range -10-0" w.c.(-250-0 mm).
• SGX-D7322NStainless steel low pressure gage, range -25-0" w.c.(-600-0 mm).
• SGX-D7522NStainless steel low pressure gage, range -60-0" w.c.(-1600-0 mm).
• SGX-D7622NStainless steel low pressure gage, range -80-0" w.c.(-2000-0 mm).
• SGX-D7722NStainless steel low pressure gage, range -100-0" w.c.(-2500-0 mm).
• SGX-D7822NStainless steel low pressure gage, range -160-0" w.c.(-4000-0 mm).
• SGX-D8022NStainless steel low pressure gage, range 0-10" w.c. (0-250 mm).
• SGX-D8122NStainless steel low pressure gage, range 0-15" w.c. (0-400 mm).
• SGX-D8222NStainless steel low pressure gage, range 0-25" w.c. (0-600 mm).
• SGX-D8322NStainless steel low pressure gage, range 0-40" w.c. (0-1000 mm).
• SGX-D8422NStainless steel low pressure gage, range 0-60" w.c. (0-1600 mm).
• SGX-D8622NStainless steel low pressure gage, range 0-100" w.c. (0-2500 mm).
• SGX-D8722NStainless steel low pressure gage, range 0-160" w.c. (0-4000 mm).
• SGX-D8822NStainless steel low pressure gage, range 0-235" w.c. (0-6000 mm).
• SGX-D8922NStainless steel low pressure gage, range -4-0-6" w.c. (-100-0-150 mm).
• SGX-D9022NStainless steel low pressure gage, range -6-0-10" w.c. (-150-0-250 mm).
• SGX-D9122NStainless steel low pressure gage, range -8-0-16" w.c. (-200-0-400 mm).
• SGX-D9522NStainless steel low pressure gage, range -40-0-60" w.c. (-1000-0-1500 mm).
• SGX-D9622NStainless steel low pressure gage, range -60-0-100" w.c. (-1500-0-2500 mm).
• SGX-D9722NStainless steel low pressure gage, range -80-0-160" w.c. (-2000-0-4000 mm).