Our Products
Laboratory Shakers
2 Products availableThe Roller Mixers mix samples through the simultaneously rolling action of the tubes and the carried vessels (bottles, test tubes etc.). As the tubes rolling, the vessels are rolling too, causing continuous mixing of the liquid inside the vessels. The most advanced features are the convenient sample handling and the accommodation of various types of vessels in the mixer without adding any adapters or accessories compared to other types of mixers.
There are two types of action on the tube rolling mixers:
There are two types of sub-models for the above models based on the control modes: An analog and a digital control. Both of the sub-models have the speed and timer controls with maximum speed of 33rpm. All units can be used in incubators up to 60°C and humidity up to 80%, or in cold rooms down to 4°C. Most sizes of tubes, Bijoux, Universals and bottles can be accommodated.
The LTR series are having nine rollers which suitable for large vessels and tubes. And the MTR series are smaller version with four rollers. The loading capacity is 5 KG for the above mixers.
Advantages
Products Range:Semi Auto Analyser, Double Beam UV/VIS Spectrophotometer, Single Beam UV/VIS Spectrophotometer, Flame Photometer, Haemoglobin Meter, Photo Colorimeter, pH Meter, Conductivity Meter, TDS Meter, DO Meter, Salinity Meter, Turbidity Meter, Nephelometer, Colony Counter, Karl Fischer Moisture Titrator, Fluorometer, Dissolution Test Apparatus, Disintegration Test Apparatus, Friability Apparatus, Melting Point Apparatus, Bulk Density Appartus, Telethermometer, Temperature Indicator, Water & Soil Analysis Kit, Portable pH Meter, Portable Conductivity Meter, Portable TDS Meter, Portable DO Meter, Student Microscope, Binocular Microscope, Medical Microscope, Co-Axial Microscope.
Techincal Specification
Model | 524 | 1524 |
---|---|---|
Roller Size | 230 mm length | 230 mm length |
Controls | Analog | Digital |
No. of Rollers | 4 | 4 |
Speed | 33rpm (Approx.) | 33rpm (Approx.) |
Maximum load, kg | 5 | 5 |
Timer | No | Continuos or Timer Operation |
Power Supply | 230V ± 10% AC, 50Hz | 230V ± 10% AC, 50Hz |
Microprocessor KF Moisture Titrator – 2760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg H O.
The system has 20 soft touch membrane type keys for ease of operation. Complete alphanumeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. The End Point indication is given by both visual LED and audible alarm. The titrator has the facility for automatically calculating the titer factor of the Karl Fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It can store 90 user defined setup files for ease of operation and final results of 300 titration . The internal battery backup provision has been made to store the results and the other titration parameters even if the instrument is switched OFF. Provision for external printer/PC attachment is available so that any of the stored results or the calibration and validation reports as per pharma compliance can be printed even at a later stage.
Features
Specification
Measuring Range | 100 ppm to 100% of moisture |
Measuring Method | Karl Fischer Volumetric Titration method. |
K.F. Dispensing | Highly sensitive motorized dynamic dispensing system |
Resolution of Titrant Volume | 0.01 ml |
Indication of Titrant Volume | 0.00 to 99.99 ml on display |
Moisture content calculation (Automatic) | %age : (0.00 to 100%) ppm :: (100 to 999999) mg H2O : (0.00 to 999.99) |
KF Titer Factor | In-built Automatic KF Titer Factor calculation facility |
End Point Alarm | Visual LED and Audible Alarm |
Wait Time for End Point Alarm | Adjustable (1 to 99 seconds) |
Dispensing Pump Calibration | Available through Key board |
Key Board | 20 keys soft touch membrane type |
Sample Storage | Upto 300 samples |
Display | 40 x 4 Line Alphanumerics LCD Display |
Clock | In-built clock with date & time display |
Stirrer | In-built Magnetic stirrer with adjustable speed |
Reagent Bottle | 3x250ml bottle for KF Reagent, Methanol & Calcium Chloride |
Printer /PC Interface | Through RS232 for serial printing using 80 column Dot Matrix Printer |
Power Supply | 230V A.C ± 10% 50 Hz. |
Dimensions | L 362 x B 295 x H 180 mm (Approx.) |
Accessories | * Dual Platinum Electrode * Titration Vessel * Built-in Magnetic Stirrer * Teflon Coated Magnetic Stirring Capsule * 250ml Bottle for Methanol * 250ml Reservoir Bottle for KF Solution *25ul Syringe * 250 ml Bottle for Calcium Chloride * Adaptor for KF Reservoir *Adaptor for Acetone Reservoir Bottle * Set of Dispenser Tubes * Set of Connecting Tubes * Main Lead *Instruction Manual |
Microprocessor KF Moisture Titrator – 1760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg H2O.
The system has 24 soft touch membrane type keys for ease of operation. Complete numeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. comfortable. The End Point indication is given by both visual LED and audible alarm. The titrator has the facility for automatically calculating the titer factor of the Karl Fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It has the storage facility of date, time, batch no. and final results of 20 titrations using the FIFO method. The internal battery backup ;provision has been made to store the results and the other titration parameters for a minimum of 1 month even if the instrument is not switched ON. Provision for external printer attachment is available so that any of the stored results can be printed even at a later stage.
Features
Specification
Measuring Range | 100ppm to 100% of moisture |
Measuring Method | Karl Fischer Volumetric Titration method. |
K.F. Dispensing | Highly sensitive motorized dispensing system. |
Resolution of Titrant Volume | 0.01 ml |
Indication of Titrant Volume | 0.00 to 99.99 ml on display |
Moisture content calculation (Automatic) | %age : (0.00 to 100%) ppm :: (100 to 999999) mg H2O : (0.00 to 999.99) |
KF Titer Factor | In-built Automatic KF Titer Factor calculation facility |
End Point Alarm | Visual LED and Audible Alarm |
Dispensing Pump Calibration | Available through Key board |
Wait Time for End Point | Adjustable (1 to 59 seconds) |
Key Board | 24 keys soft touch membrane type |
Sample storage | Upto 20 latest samples using FIFO memory |
Display | 8 digit bright red seven segment display. |
Clock | In-built clock with date & time display |
Stirrer | In-built Magnetic stirrer with adjustable speed. |
Reagent Bottle | 3x250ml bottle for KF Reagent, methanol & calcium chloride |
Printer Interface | External Serial printer interface available. |
Power Supply | 230V A.C ± 10% 50 Hz. |
Dimensions | 360 x 295 x 175 mm |
Accessories | Dual Platinum Electrode, Built-In Magnetic Stirrer, 250ml Bottle for Methanol, 10 Syringe, Adapter for KF Reservoir, Set of Dispenser Tubes, Bottle Container, Dust Cover, Titration Vessel with Teflon Cover, Teflon Coated Magnetic Stirring Capsule, 250 ml Reservoir Bottle for KF Solution, 250 ml bottle for Calcium Chloride, Adapter for Methanol Reservoir Bottle, Set of Connecting Tubes, Main Lead, Instruction Manual |
Electromagnetic sieve shaker 918 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times.
These Sieve Shakers are activated by electromagnetic impulses, they are recommended to perform sieving tests where high precision and performance are important, and where continual and intense uses are required.
It is particularly designed for test sieves with a diameter of 200 mm x 50mm h. They are therefore suggested for accurate sieving tests, also on fine materials. These Electromagnetic Shakers are of simple and sturdy construction, can hold up to 8 sieves .
Features
Specification
Operation mode | Intermittent and Continuous Shifting Motion |
Intermittent operation | At Intervals (0.5 sec) |
Capacity | Up to 8 Sieves (Test Sieve Dia form 200mm x 50mm h) |
Shake time | Programmable Shake Time from 1min to 99min |
Display | 20 x 4 Alphanumeric LCD with Backlit Display |
Keypad | Fully Alphanumeric Keypad |
Power level | Programmable (from 1 to 20) |
Noise | Very Low Noise Operation |
Security | 2 Tier Password Protection Facility (Admin & User) |
Printer | RS 232 Port for Serial Printer using 80 Column Dot Matrix or Thermal Printer |
Dry sieving | Standard (Wet Sieve Optional) |
Power | 220V AC, 50 Hz |
Dimension (L X B X H) | 310mm x 390mm x260mm (approx.) |
Weight | 49 kgs approx. (without Sieves) |
Features
Microprocessor Haemoglobin Meter – 1315 is used to determine the haemoglobin concentration in the blood sample. The measurement haemoglobin concentration is carried out at wavelength of 546 nm. Using state-of-the-art LED technology the green light produced is projected through the sample and measured by sensitive photodiode. The measurements are made using cyanmethemoglobin method used through the world.
Heamoglobin is an iron-containing protein found in the red blood cells. It enables the red cells, to carry oxygen from lungs to the rest of the body and carry carbon dioxide back. The haemoglobin level indicates the blood’s oxygen-carrying capacity and can play a major role in the early diagnosis of many illnesses such as thelsemia, sickle cell anemia, leukemia, malaria and hook worm etc.
Features
Electronics India is prime Differential Blood Cell Counter manufacturers and suppliers from India.
Differential Blood Cell Counter use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stability and is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.
Differential Blood Cell Counter Model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stabilityand is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.
Features
pH/mV/Temp Waterproof Tester Model 7011 is a hand held microprocessor based waterproof pH/Temperature tester. It is used to determine wide range of pH, ORP and temperature measurements and has a replaceable electrode. This tester has wide applications in agriculture, anti-freeze recycling, aquarium, boiler, chemical industry, cooling tower, drinking water, fish farming, food industry, garden husbandry, hydroponics, laboratory usage, plating industry, swimming pool & spa, water treatment etc.
It is supplied in a beautiful ABS Plastic carrying case of 9″ x 7″ x 2.5″. It has rugged design for field use. It floats on water. It has Automatic Temperature Compensation (ATC) and is ºC/ºF switchable. It displays Maximum/Minimum value and data hold on large LCD display. It has low battery and consumption indicator along with auto shut off after 10 minutes of non use.
Features
Specification
Display | Large LCD to display respective parameters, Battery level, ATC and Temperature |
Range | pH: -2 – 16.00 mV: -1000 – 1000 mV |
Temp | 0 – 90.0 °C |
Resolution | pH: 0.01 pH, mV: 1 mV, Temp.: 0.1 °C |
Accuracy | pH: ± 0.01 +1 Digit, mV: ±2 +1 Digit, Temp: ± 0.2 °C +1 Digit |
Temperature Compensation | Automatic Temperature Compensation (ATC) with temperature display |
Sensor | User Replaceable pH/Temp. Sensor |
Water Proof | As per IP 57 water proofing standard |
Calibration | pH: 4.00, 7.00 and 10.01 |
Power | DC 1.5 V x 4 battery (UM-4/AAA) Auto Power off after 10 minutes |
Dimensions | Meter: 195 x 40 x 36 mm Kit: 230 x 205 x 50 mm |
Weight | Meter: 135 g with battery (Approx.) Kit: 700 g (Approx.) |
Others Features | Auto Power-off after 10 minutes, Hold function to freeze reading, Push button calibration, Water-proof IP-57, Self-Diagnostics message for low battery and over range/under range |
ACCESSORIES | Standard 4.00 & 7.00 Calibration Solution (50 ml) each, AAA cells, Lanyard, Instruction Manual and Carrying Case Calibration Certificate |
Conductivity/TDS/Salt/Temp Waterproof Tester – 7021 is a microprocessor based tester used to determine Conductivity, TDS, Temperature, and Salts in a liquid. This tester has wide applications in agriculture, anti-freeze recycling, aquarium, boiler, chemical industry, cooling tower, drinking water, fish farming, food industry, garden husbandry, hydroponics, laboratory usage, plating industry, swimming pool & spa, water treatment etc.
It has rugged design for field use. It floats on water. It has Automatic Temperature Compensation (ATC) and is degree ºC/ºF switchable. It displays Maximum/Minimum value and data hold on large LCD display. It has low battery and consumption indicator along with auto shut off after 10 minutes of non use.
Features
Specification
Display | Large LCD to display respective parameters, Battery level, ATC & Temperature | |
Range | TDS : 0 to 1300 ppm 1.30 – 13.00 ppt Cond : 0 to 2000 µS, 2.00 – 20.00 mS |
Salt : 0 to 1000 ppm 1.00 to 12.00 ppt Temp : 0 to 90.0°C 32 to 194.0°F |
Resolution | TDS/Salt: 1 ppm/0.01 ppt, Cond.: 1 µS/0.01mS, Temp.: 0.1°C/°F | |
Accuracy | TDS/Cond/Salt: ± 2% of F.S., Temp: ±0.2°C +1 digit | |
Temperature Compensation | Automatic Temperature Compensation (ATC) with temperature display | |
Temperature Coefficient | 2% per 0C | |
Water Proof | As per IP – 57 water proofing standard | |
TDS Factor | 0.67 | |
Power | DC 1.5 V x 4 battery (UM-4/AAA) Auto power off after 10 minutes | |
Dimensions | Meter: 195 x 40 x 36 mm, Kit : 230 x 205 x 50 mm | |
Weight | Meter: 135 g with battery Kit: 780 g | |
Others Features | Auto Power-off after 10 minutes, Hold function to freeze reading, Push button calibration, Water-proof IP-57, Temperature coefficient- 2% per ºC, Self-Diagnostics message for low battery | |
ACCESSORIES | Standard Calibration Solution (50 ml), Battery, Lanyard, Instruction Manual and Carrying Case |
Clarity of water is extremely important in products destined for human consumption. Suspension free water is also considered necessary for industries manufacturing beverage, food products etc. Similarly, minimum limits of turbidity are required to be observed in drinking water & sewage disposals.
Ei’s Digital Turbidity Meter and Nephelometer are ideal instruments for measurement of suspensions. They consist of a light source focused on a test tube containing the sample solution under test. The light, reflected at right angle to the focused light by the suspension in the solution, is detected by the photo electric detector, amplified and displayed on a 3½ digit LED display.
Features
Specification
Model | 335 | 331 | 341 |
Product | Digital Turbidity Meter |
Digital Turbidity Meter |
Digital Nephelometer |
Range | 0 – 1000 NTU (in 4 Ranges) 0 – 2, 20, 200, 1000 NTU |
0 – 1000 NTU (in 2 Ranges) 0 – 200, 1000 NTU |
0 – 200 NTU (in 2 Ranges) 0 – 20, 200 NTU |
Resolution | 0.01 NTU | 1 NTU | 0.1 NTU |
Accuracy | ± 3% FS, ± 1Digit | ± 3% FS, ± 1Digit | ± 2% FS, ± 1Digit |
Display | 3½ Digit 7-Segment LED | ||
Light Source | IR LED | ||
Detector | Photodiode | ||
Sample System | 60 x 25mm Clear Glass Test Tubes | ||
Power | 230 V ± 10% AC, 50 Hz | ||
Dimensions | 245 x 260 x 125 mm (L x B x H) (Approx.) | ||
Accessories | Test tube Set of 5, Operation Manual, Dust Cover |
Microprocessor Potentiometer is a solid state instrument designed to provide the precise potentiometric measurements. The instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you through out the measurement process. The system has 3 soft touch membrane type keys for ease of operation. The instrument have built-in stirrer and internal standard facility.
Features
Specification
Model | 120 | 121 | 122 |
Readout | 3½ digit bright red LED display | ||
Key Board | 3 soft touch keys | ||
Range | 0 to ± 1999 mV | ||
Resolution | 1 mV | ||
Accuracy | ± 1 mV ± 1 digit | ||
Internal Standard | Available | ||
Operating Temperature | 10°C to 50°C | ||
Burette Assembly Option | Not Available | Available for 1 Burette | Available for 2 Burettes |
Inbuilt Stirrer | Avialable at fixed RPM | ||
Power supply | 230V ± 10%AC, 50 Hz | ||
Dimensions | 278 x 248 x 101 mm (LxBxH) | ||
Weight | 2.5 Kg | ||
Standard Accessories | Platinum Electrode – 1 No., Reference Electrode – 1 No., Dust Cover – 1 No., Electrode Stand – 1 No., Magnet Capsule – 1 No., Titration Beaker – 1 No., Instruction Manual – 1 No. |
||
Optional Accessories | Silver Electrodes, Glass Electrode, Complete Burette Assembly |
Digital Potentiometer Model-118 is a precision instrument for potentiometric measurements. Results are displayed in millivolts on a direct digital readout by 3½ digit LED display. It is supplied with a set of 4 electrodes viz. Reference, Platinum, Silver & Glass. It is extremely useful for potentionmetric, ORP and acid base titrations.
This is useful instrument for Chemistry Labs, Pharmaceutical Industries, Colleges and University Labs etc.
Features
Specification
Range | 0 – ± 199.9 mV, 0 – ± 1999mV |
Resolution | 0.1 mV |
Repeatability | ± 1 mV |
Accuracy | ± 1 mV, ± 1 digit |
Input Impedance | > 1012 ohms |
Operating Temperature |
10 °C – 45 °C |
Display | 3½ Digit 0.5″ 7-Segment LED Display with auto polarity indication |
Power | 230 V ± 10% AC, 50 Hz. |
Dimensions (L x B x H) |
275 x 175 x 75 mm (Approx.) |
Weight | 2.5 Kg (Approx.) |
Accessories | Platinum Electrode, Reference, Glass Electrode, Silver Electrode, Electrode Stand, Clamp and Dust Cover |
Microprocessor Colony Counter is a solid state microcontroller based instrument designed for quick and accurate counting of bacterial & mould colonies in petri dishes. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.
The system has 6 soft touch membrane type keys for ease of operation. It has a ‘Reset’ key to reset the digital count. Any unwanted count can be removed by pressing the ‘Correct’ key. A built-in averaging facility allows the calculation of average colony counts using multiple dishes. It has the storage facility for 100 result-counts which are retained in the memory even when the instrument is switched off. A ‘Recall’ key is provided to retrieve the stored result colony counts from the instrument memory.
Optimum viewing of colonies is aided by peripheral glare free illumination graticuled disc provided in the instrument. The magnifier magnifies the colony area. This is an indispensable tool for the microbiologist.
Features
Specification
Model | 1361 | 1362 | 1363 |
Display | 3 Digit, 7-Seg. LED | 4 Digit, 7-Seg. LED | 6 Digit, 7-Seg. LED |
Max. Counts | 999 | 9999 | 999999 |
Keyboard | 6 soft touch membrane keys | ||
Correction | Count correction facility available to cancel the unwanted count | ||
Storage | 100 Result-Count storage, even if the instrument is switched off | ||
Average | Average mode facility available | ||
Dish Size | 110 mm | ||
Magnification | x 1.7 Surface Magnification | ||
Power | 230 V ± 10% AC, 50 Hz, | ||
Dimensions | 225 x 250 x 280 mm (L x B x H) (Approx.) | ||
Weight | 4 Kg (Approx.) | ||
Accessories | Marking Pen, Magnifying Lens, Lens Holder, Operation Manual and Dust Cover |
Microprocessor Tap Density Tester, Model 1951 is a density measurement equipment used to measure tapped density of powders, as well as granulated or flaked materials by standardized and repeatable procedures. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.
System is equipped with 4 line alphanumeric LCD display with backlit and 16 number of soft touch membrane type keys.
The unit is provided with two motorized platforms which allow for 14 ± 2.0 mm drop height for the USP Method I version, and a 3 ± 0.2 mm drop height for the USP Method II version. The motorized platforms consist of two cylinder holders with snap-lock mechanism designed to hold 100 ml and 250 ml cylinders. The simultaneous rotating and tapping motion minimizes any possible loss of mass during tapping down.
The instrument stores the test parameters, readings and results simultaneously in the memory which are retained even after the power is switched OFF. Provision has also been made for attachment of a printer so as to provide hard-copy printouts of test data, including the time, date and calculated results.
Features
Specification
Test Methods | USP-I & USP-II |
No. of Stations | 2 |
Display | 20 x 4 Alphanumeric LCD |
Keyboard | 16 Soft touch membrane keys, alphanumeric mobile keypad |
Tap Height | USP-I: 14mm± 2mm, USP-II: 3mm ± 0.2mm |
Taps/Minute | USP-I: 300± 15, USP-II: 250± 15 |
No. of Tap Counts | 1 to 9999 |
Type of Drive | Direct Drive with Stepper Motor |
Printer Accessories | Attachment of RS232 printer with Serial interface |
Standard Accessories | Cylinders 100 & 250ml (1 each) Cylinder holders for 100 & 250ml (1 each) |
Electrical Supply | 230 V AC ± 10%, 50/60 Hz, 44VA |
Dimensions (WxHxD) | 360x340x190 mm without holder |
Weight | 15 Kgs |
Bulk Density Apparatus – 951 is a specially designed to study the packing down of powder beds of different pharmaceutical and chemical powders, flakes, pellets, granules and other bulk substances. Bulk Density is an essential test required in the process of tablet, capsule filling and cosmetic manufacturing.
The system is equipped with microcontroller based digital display for displaying accurate and exact stroke count and soft touch membrane type keys for ease of operation. The system has ‘SET’, ‘UP’ and ‘DOWN’ keys, for setting the total number of required strokes (Set Count) for the current measurement session. User can set to any number of required strokes within the range from 1 to 9999 counts. The system automatically stores the last ‘Set Count’ value which is retained in the memory even when the instrument is switched off. Each stroke count is displayed on the 4 digit seven segment bright red LED display on the front panel. A common lock cushioned holder for both the cylinders drops down smoothly from the height and holds the cylinders. The Up/Down (i.e. Tapping) movement of the cylinders stop automatically at the ‘Set Count’ value. An audible alarm sound indicates that the current measurement session is over.
In case of power failure, the last counts are retained and the instrument starts counting automatically from the point of power failure. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.
Features
Specification
Maximum Counts | 9999 |
Display | 4 Digit 7-Segment Red LED |
Keyboard | 6 Soft Touch Membrane Keys |
Cylinder | 2 Nos., 50/100 ml Cylinders |
Drop Height | 25 mm, 35 mm, 55 mm (Approx.) |
Power | 230 V ± 10% AC, 50 Hz. |
Dimensions | 600 x 450 x 200 mm (Approx.) |
Weight | 12 Kg (approx.) |
Accessories | 50 ml Cylinders – 2 Nos., Instruction Manual & Dust Cover |
Auto Karl Fischer Titrimeter – 761 is an automatic apparatus designed to carry out Karl Fischer Titrations for accurate determination of moisture content in various samples. On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology.
Titration unit contains the magnetic stirring mechanism and the solenoid valve assembly. The cabinet is designed to serve as a titration stand.
Karl Fischer method for determination of moisture content is used in pharmaceutical and drug manufacturing industries, food stuff, sugar, wood, paper and textile industries, petroleum refineries, chemical and fertilizer units etc.
Features
Specification
CONTROL UNIT | |
Display | Array of 10 LEDs |
Timer | Adjustable Timer |
Buzzer | Yes |
Sample Size | 1-50 mg of Water |
K.F.Dispensing Resolution | 0.05 ml. |
Measuring Electrode | Dual Platinum |
Indications | RUN} ADD } Display in Auto Mode END} |
Detection | Current sensing by electronic control |
Dimensions | L340 X B250 X H125 mm. (Approx.) |
Weight | 2 kg. (Approx.) |
TITRATION UNIT | |
Titration Cell | Air Tight 200ml. |
Stirrer | Variable speed magnetic stirrer with On/Off control |
K.F.Flow | Automatic Sensitive Control Valve for KF Reagent |
Burette | Pressure filling auto zero burette with 0.05 ml resolution |
Power | 230V AC + 10% 50Hz, AC |
Dimensions | L325 X B180 X H98 mm (Approx.) |
Weight | 3 Kg. (Approx.) |
Accessories | Burette (Clear Glass) 10 ml * Reservoir Bottle 500 ml rubber bellow for air pumping Titration Cell Dual Platinum Electrode Magnetic Capsule Set of 2 Clamps Rubber Tubing Nozzle Instruction Manual |
Features
Specification
Display | LCD with backlit display |
Keyboard | User Friendly 9 Keys operations |
Hardness Range | 5-500N |
Hardness Accuracy | ±0.05% FS |
Measuring Units | N(Newton), KGF (Kilogram Force) and Lbf (Low bound Force) |
Interface Ports | RS-232 |
Dimensions | 360 x 65 x 100 mm |
Electrical Power Adapter | 230 V, 50Hz to DC 12V, 300 mA |
Battery | 1200 mAH, 8.4V, Ni-Hi Rechargeable Battery |
Peak Force Measurement | Yes |
Acrylic Safety Glass Cover | Yes |
Stored Results | Upto 10 (also calculate the average value of test results) |
Zero point adjustment for Calibration | Yes |
Auto Unit Conversion | Yes |
Programmable T1, T2 tolerance | Yes |
Tablet Size | Yes (2mm to 28 mm) |
Microprocessor Friability Apparatus, Model 1902 measures the tendency of a tablet to chip or breakdown to pieces when held under mechanical stresses. Instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.
System is equipped with 4 line alphanumeric LCD display with backlit and 16 number of soft touch membrane type keys.
The friability tester can be operated using only one or two drums. The rotational speed of drums can be set at different speeds (20-60 RPM). The samples can be loaded conveniently without removing the drums and after the test completion the samples are automatically unloaded to the collection tray.
To eliminate the manual input of weight of samples the facility of connecting a weighing scale is also available. When weighing scale is connected the weight of samples is automatically recorded to the instrument from the weighing balance.
The test can be performed in two different modes Time or Count mode. The instrument stores the test parameters, readings and results simultaneously in the memory which are retained even after the power is switched OFF. Provision has also been made for attachment of a printer so as to provide hard-copy printouts of test data, including the time, date and calculated results.
Features
Specification
Test Methods | Time and Count Mode |
Speed of Drums | 20 – 60 RPM |
No. of Drums | 2 |
Display | 20×4 Alphanumeric LCD |
Keyboard | Soft touch membrane keys, alphanumeric mobile keypad |
Counter | 1 to 9999 rotations |
Timer | 1 sec to 9 hrs 59 min 59 sec |
Type of Drive | Direct Drive with Stepper Motor |
Printer | Attachment of RS232 printer with Serial interface |
Electrical Supply | 230 V AC ± 10%, 50/60 Hz, 44VA |
Dimensions (WxHxD) | 335mm X 330mm X 340mm |
Weight | 12 Kgs |
Digital Tele-Thermometer – Model 461 is an ideal, low cost, accurate and easy to operate instrument useful for pyrogen testing in pharmaceutical industries. The instrument has 6 channels so that temperature of 6 different rabbits can be monitored simultaneously. Special temperature probes are provided which can be easily inserted in the anus of the rabbits. Any of the 6 channels can be selected by a rotary switch provided on the front panel.
Features
Specification
Range | 0 – 60 °C |
Resolution | 0.1 °C |
Accuracy | ± 0.2% FS, ± 1 Digit |
Input | RTD (PT-100) or IC Sensor |
Channels | 6 Channels, switch selectable |
Repeatability | ± 1 °C |
Display | 3½ Digit, 7-segment bright red LED |
Power | 230 V ± 10% AC, 50 Hz. |
Dimensions | 275 x 175 x 75 mm (approx.) |
Weight | 2 Kg (approx.) |
Accessories | Pyrogen Probes (Set of 6), Operation Manual, Dust Cover |
pH/Conductivity/TDS/Salt/Temp Waterproof Tester – 7200 is a microprocessor based tester used to determine pH, mV, Temperature, Conductivity, TDS and Salts in a liquid. This tester has wide applications in agriculture, anti-freeze recycling, aquarium, boiler, chemical industry, cooling tower, drinking water, fish farming, food industry, garden husbandry, hydroponics, laboratory usage, plating industry, swimming pool & spa, water treatment etc.
It has rugged design for field use. It floats on water. It has Automatic Temperature Compensation (ATC) and is degree ºC/ºF switchable. It displays Maximum/Minimum value and data hold on large LCD display. It has low battery and consumption indicator along with auto shut off after 10 minutes of non use.
Features
Specification
Display | Large LCD to display respective parameters, Battery level, ATC & Temperature |
|
---|---|---|
Range | pH: -2 – 16.00 TDS: 0 – 1300 ppm 1.30 – 13.00 ppt Cond: 0 – 2000 µS 2.00 – 20.00 mS |
mV: -1000 – 1000 mV Salt: 0 – 1000 ppm 1.00 – 12.00 ppt Temp: 0 – 90.0 °C 32 – 194.0 °F |
Resolution | pH: 0.01 pH, mV: 1 mV, TDS: 1 ppm/0.01 ppt, Cond.: 1 µS/0.01 mS, Temp.: 0.1 °C/°F, Salt: 1 ppm/0.01 ppt |
|
Accuracy | pH: ± 0.01 +1 Digit, mV: ± 2 +1 Digit, TDS/Cond/Salt: ± 2% of F.S., Temp: ± 0.2 °C +1 Digit |
|
Automatic Temperature | Automatic Temperature Compensation (ATC) with temperature display |
|
Temperature Coefficient | 2% per °C | |
Sensor | User Replaceable | |
Water Proof | As per IP – 57 water proofing standard | |
Calibration | Calibration pH: 4.00, 7.00 and 10.01, Cond.: 0 µS, 1413 µS, 12.88 mS |
|
Power | DCDC 1.5 V x 4 battery (UM-4/AAA) Auto power off after 10 minutes |
|
Dimensions (L x B x H) |
Meter: 195 x 40 x 36 mm (Approx.) Kit: 230 x 205 x 50 mm (Approx.) |
|
Weight | Meter: 135 g with battery, Kit: 780 g | |
Others Features | Auto Power-off after 10 minutes, Hold function to freeze reading, Push button calibration, Water-proof IP-57, Temperature coefficient – 2% per °C, Self-Diagnostics message for low battery | |
Accessories | Standard Calibration Solution (50 ml), Battery, Lanyard, Operation Manual and Carrying Case |
FLOCCULATION/JAR TEST APPARATUS, MODEL 1922, 1924, 1926 is a flocculation (jar) tests on water and effluent samples. A digital display clearly indicates the speed of the rotational stainless steel paddles, which can be varied from 10 to 300 RPM. The digital timer can be set to count down from 1 to 99 minutes. After count down, the paddles stop and an alert sounds. The timer then counts up in minutes in order to measure settling time.
Two pre-set programs allow routine speed and time parameters to be input and then selected by simply pressing one button. Parameters are stored in the memory and can be recalled or altered at any time. The intuitive touch sensitive keypad is totally flat for easy cleaning.
Features
Specification
Model | 1922 | 1924 | 1926 |
No. of Jar | 2 | 4 | 6 |
Speed range | 25 to 200 RPM | ||
Pre-set programs | 2 | ||
Timer | 0 to 99 minutes | ||
Controls Keypad | Touch sensitive | ||
Digital Display | LED | ||
Power | 230V, 50Hz, 100W |
Features
Specification
Model | 161 | 191 | 172 |
Display | 3½ Digit LCD | 3½ Digit LCD | 3½ Digit LCD |
pH | |||
Range | 0 – 14 pH | 0 – 14 pH | 0 – 14 pH |
Resolution | 0.01 pH | 0.01 pH | 0.01 pH |
Accuracy | 0.01, ± 1 Digit | 0.01, ± 1 Digit | 0.01, ± 1 Digit |
Temp. Comp. | 0 – 100 °C (Manual) | 0 – 100 °C (Manual) | 0 – 100 °C (Manual) |
Conductivity | |||
Range | 0 – 200 µS 0 – 2, 0 – 20, 0 – 200 mS |
0 – 20 mS | 0 – 20 mS |
Resolution | 0.1 µS | 0.01 mS (10 µS) |
0.01 mS (10 µS) |
Range Select | Manual | – | |
Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
Cell Constant | Adjustable (0.4 – 1.5) |
Pre-Adjusted | Pre-Adjusted |
Temp. Coeff. | 0.02 | 0.02 | 0.02 |
Temp. Comp. | Adjustable from Table |
Adjustable from Table |
Adjustable from Table |
Ref. Temp. | 25 °C | 25 °C | 25 °C |
Temperature | |||
Range | 0 – 100 °C | 0 – 100 °C | 0 – 100 °C |
Resolution | 0.1 °C | 0.1 °C | 0.1 °C |
Accuracy | ± 0.1 °C ± 1 Digit |
± 0.1 °C ± 1 Digit |
± 0.1 °C ± 1 Digit |
Sensor | Semiconductor | Semiconductor | Semiconductor |
TDS | |||
Range | 0 – 200 ppm 0 – 2, 0 – 20, 0 – 200 ppt |
0 – 20 ppt | 0 – 20 ppt |
Range Select | Manual | – | – |
Resolution | 0.1 ppm | 0.1 ppt | 0.1 ppt |
Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
Cell Constant | On Display (0.4 – 1.5) |
Pre-Adjusted | Pre-Adjusted |
DO | |||
Range | 0 – 20 ppm | 0 – 20 ppm | 0 – 20 ppm |
Resolution | 0.1 ppm | 0.1 ppt | 0.1 ppt |
Accuracy | 0.5 ppm, ± 1 Digit |
0.5 ppm, ± 1 Digit |
0.5 ppm, ± 1 Digit |
Temp. Comp. | 5 – 55 °C (Manual) |
5 – 55 °C (Manual) |
5 – 55 °C (Manual) |
Sensor | Gold/Silver Amperometric |
Gold/Silver Amperometric |
Gold/Silver Amperometric |
mV (ORP) | |||
Range | 0 – ± 1999 mV | – | – |
Resolution | 1 mV | – | – |
Accuracy | 1 mV, ± 1 Digit | – | – |
Turbidity | |||
Range | – | 0 – 1000 NTU | 0 – 1000 NTU |
Resolution | – | 1 NTU | 1 NTU |
Accuracy | – | ± 3% FS, ± 1 Digit |
± 3% FS, ± 1 Digit |
Sample System | – | 30 mm clear Glass Tube | 30 mm clear Glass Tube |
Salinity | |||
Range | 0 – 50 ppt | 0 – 50 ppt | 0 – 50 ppt |
Resolution | 0.1 ppt | 0.1 ppt | 0.1 ppt |
Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
Colorimeter | |||
Abs | – | – | 0 – 1.99 |
Filters | – | – | 5 |
Resolution | – | – | 0.01 A |
POWER SUPPLY | 1.5 V x 6 Dry Cells/ 230 V ± 10% AC, 50 Hz. |
In-built Chargeable Battery 230 V ± 10% AC, 50 Hz. |
In-built Chargeable Battery 230 V ± 10% AC, 50 Hz. |
ACCESSORIES | pH Electrode, Cond/TDS/Salinity cell, DO Probe, Temperature Probe, pH Bottles, pH Tablets, Turbidity Test Tubes (Model – 172 & 191), Colorimeter Test Tube (Model 172), Dry Cell Container – (Model – 161), Mains Lead, Operation Manual |
Features
Specification
Model | 161 | 191 | 172 |
Display | 3½ Digit LCD | 3½ Digit LCD | 3½ Digit LCD |
pH | |||
Range | 0 – 14 pH | 0 – 14 pH | 0 – 14 pH |
Resolution | 0.01 pH | 0.01 pH | 0.01 pH |
Accuracy | 0.01, ± 1 Digit | 0.01, ± 1 Digit | 0.01, ± 1 Digit |
Temp. Comp. | 0 – 100 °C (Manual) | 0 – 100 °C (Manual) | 0 – 100 °C (Manual) |
Conductivity | |||
Range | 0 – 200 µS 0 – 2, 0 – 20, 0 – 200 mS |
0 – 20 mS | 0 – 20 mS |
Resolution | 0.1 µS | 0.01 mS (10 µS) |
0.01 mS (10 µS) |
Range Select | Manual | – | |
Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
Cell Constant | Adjustable (0.4 – 1.5) |
Pre-Adjusted | Pre-Adjusted |
Temp. Coeff. | 0.02 | 0.02 | 0.02 |
Temp. Comp. | Adjustable from Table |
Adjustable from Table |
Adjustable from Table |
Ref. Temp. | 25 °C | 25 °C | 25 °C |
Temperature | |||
Range | 0 – 100 °C | 0 – 100 °C | 0 – 100 °C |
Resolution | 0.1 °C | 0.1 °C | 0.1 °C |
Accuracy | ± 0.1 °C ± 1 Digit |
± 0.1 °C ± 1 Digit |
± 0.1 °C ± 1 Digit |
Sensor | Semiconductor | Semiconductor | Semiconductor |
TDS | |||
Range | 0 – 200 ppm 0 – 2, 0 – 20, 0 – 200 ppt |
0 – 20 ppt | 0 – 20 ppt |
Range Select | Manual | – | – |
Resolution | 0.1 ppm | 0.1 ppt | 0.1 ppt |
Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
Cell Constant | On Display (0.4 – 1.5) |
Pre-Adjusted | Pre-Adjusted |
DO | |||
Range | 0 – 20 ppm | 0 – 20 ppm | 0 – 20 ppm |
Resolution | 0.1 ppm | 0.1 ppt | 0.1 ppt |
Accuracy | 0.5 ppm, ± 1 Digit |
0.5 ppm, ± 1 Digit |
0.5 ppm, ± 1 Digit |
Temp. Comp. | 5 – 55 °C (Manual) |
5 – 55 °C (Manual) |
5 – 55 °C (Manual) |
Sensor | Gold/Silver Amperometric |
Gold/Silver Amperometric |
Gold/Silver Amperometric |
mV (ORP) | |||
Range | 0 – ± 1999 mV | – | – |
Resolution | 1 mV | – | – |
Accuracy | 1 mV, ± 1 Digit | – | – |
Turbidity | |||
Range | – | 0 – 1000 NTU | 0 – 1000 NTU |
Resolution | – | 1 NTU | 1 NTU |
Accuracy | – | ± 3% FS, ± 1 Digit |
± 3% FS, ± 1 Digit |
Sample System | – | 30 mm clear Glass Tube | 30 mm clear Glass Tube |
Salinity | |||
Range | 0 – 50 ppt | 0 – 50 ppt | 0 – 50 ppt |
Resolution | 0.1 ppt | 0.1 ppt | 0.1 ppt |
Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
Colorimeter | |||
Abs | – | – | 0 – 1.99 |
Filters | – | – | 5 |
Resolution | – | – | 0.01 A |
POWER SUPPLY | 1.5 V x 6 Dry Cells/ 230 V ± 10% AC, 50 Hz. |
In-built Chargeable Battery 230 V ± 10% AC, 50 Hz. |
In-built Chargeable Battery 230 V ± 10% AC, 50 Hz. |
ACCESSORIES | pH Electrode, Cond/TDS/Salinity cell, DO Probe, Temperature Probe, pH Bottles, pH Tablets, Turbidity Test Tubes (Model – 172 & 191), Colorimeter Test Tube (Model 172), Dry Cell Container – (Model – 161), Mains Lead, Operation Manual |