Our Products
Water Softening System
1 Products availableDemineralisation Plants
1 Products availableWater Treatment & Purification Plant
1 Products availableWater Purification Plants
1 Products availableChemical Machinery & Plant
1 Products availablePressure Filter
1 Products availableMedia Filter
1 Products availableElectronic Filter
1 Products availableLeading Manufacturer, Supplier & Retailer of .
The Industrial Agitator that we provide projects from the bottom of the wash basket and create the wash action by rotating back and forth, rolling garments from the top of the load, down to the bottom and then back up again. There are several types of agitators with the most common being the "straight-vane" and "dual-action." The "straight-vane" is a one-part agitator with bottom and side fins that usually turns back and forth. The Dual-action is a two-part agitator that has bottom washer fins that moves back and forth and a spiral top that rotates clockwise to help guide the clothes to the bottom washer fins. Our Industrial Agitator is appreciated for durability and excellent performance. Moreover, we provide Industrial Agitator at affordable rates.
Technical Specifications
BASE | Fabricated |
---|---|
MOTOR | HP, 4P, AC, 3ph, TEFC, 415V, 50 C/s., Class F, Electric Motors of SEIMENS / CROMPTON / KIRLOSKAR / NGEF / ABB. |
GEARBOX | RADICON / ELECON make worm reduction gearbox |
IMPELLER | Four blades pitched paddle turbine type impeller. |
MOTOR | Fabricated and machined base frame. We are the only manufacturer in India to provide this feature. RPM 75 to 100 RPM. |
WETTED PARTS | MSRL / FRP / Lead Lined / SS / Rubber etc. |
We are offering highly efficient Activated Carbon Filter that is designed and manufactured with dual filtering media like sand and activated carbon. Our Activated Carbon Filter can be used as initial unit for industrial water treatment. It is also used as pretreatment and tertiary treatment of waste water. Activated Carbon Filter that we offer comprises of a steel pressure vessel containing activated carbon granules as filter media. Activated carbon is porous carbon material and has very strong adsorption capacity. Our Activated Carbon Filter helps in removing bad odor of water. It is used as a catalyst or catalyst carrier, to find wide applications in industrial production, agriculture and environmental protection. Our Activated Carbon Filter is fitted with number of valves for inlet, outlet, drain and backwash with suitable piping size to meet the specification and capacity designed by customers. It is used in sugar industries, distilleries, food industries, water boards, etc.
Applications :
Demineralisation Plant is a plant that generally consists of cation, anion, and mixed bed exchangers. Any ions in the final water from this process consist essentially of hydrogen ions and hydroxide ions, which recombine to form pure water. Very pure DM water becomes highly corrosive once it absorbs oxygen from the atmosphere because of its very high affinity for oxygen.
The capacity of our Demineralisation Plant is dictated by the type and quantity of salts in the raw water input. However, some storage is required if the DM plant is under maintenance. For this purpose, a storage tank is installed from which DM water is continuously withdrawn for boiler make-up. The storage tank for DM water is made from materials not affected by corrosive water such as PVC. The piping and valves are generally made of stainless steel. Sometimes, a steam blanketing arrangement or stainless steel doughnut float is provided on top of the water in the tank to avoid contact with air. DM water make-up is generally added at the steam space of the surface condenser. This arrangement not only sprays the water but also DM water gets deaerated, with the dissolved gases being removed by an air ejector attached to the condenser.
We are instrumental in providing our clients with Demineralisation Plant that makes use of ion exchange technology, which is used to remove salts (cations and anions) from the water soluble chemical compounds, when dissolved in water, become ionized; that is their molecules dissociate into positively and negatively charged components called ions. Consider common table salt and sodium chloride. In its solid form, this compound consists of one sodium atom (na) and one chlorine atom (cl) tightly coupled together (nacl). When dissolved in water, however, the compound splits into two ions, na and cl.
We are one of the trusted fabricators of Demineralisation Plant, which is based on ion exchange technology for removal of salts (cations and anions). This removal process of salts from the water soluble chemical compounds takes place when they get dissolved in water. Our Demineralisation Plant is fabricated using corrosion resistant material and can be customized according to the requirements of the clients.
We are offering Pressure Sand Filter that consists of a pressure vessel, which could be either vertical or horizontal-fitted with a set of frontal pipe work and valves, graded silica quartz sand supported by layers of graded under bed consisting of pebbles and gravels, a top distributor to distribute the incoming water uniformly throughout the cross section of the filter and an under drain system to collect filtered water.
Raw water flows down wards through the filter bed and as the suspended matter, which has usually been treated by addition of a coagulant like alum is retained on the sand surface and between the sand grains immediately below the surface. There is steady rise in the loss of head as the filter process continues and the flow reduces once the pressure drop across the filter becomes excessive.
The cleaning of the Pressure Sand Filter is effected by flow reversal. To assist in cleaning the bed, the backwash operation is often preceded by air agitation through the under drain system. The process of air scouring agitates the sand with a scrubbing action, which loosens the intercepted particles. After which, the filter is ready to be put back into service.
Advantages :
We are offering highly efficient Skid Mounted Chemical Dosing System which can be directly connected to the process system components required for smooth & efficient dosing. All the components are manufactured and listed before assembly under the supervision of qualified engineers. Tank (as per required capacity), motorized agitator, level gauge with protector, dissolving basket, dosing pump with motor, pulsation dampner, pressure gauge, pressure relief valve, non-return valve, strainer and piping constitutes to the major components of the Skid Mounted Chemical Dosing System. Our wide range of Skid Mounted Chemical Dosing System offers a perfect solution for all chemical dosing problems. Moreover, our Skid Mounted Chemical Dosing System is fabricated using superior quality raw material and possess following parts and features :
Enviro Engineering is a dominant Manufacturer, Supplier and Exporter of Industrial Filter Press, Industrial Agitator, Skid Mounted Chemical Dosing System and Water Treatment Plant. Water Treatment Plant includes Activated Carbon Filter, Pressure Sand Filter, High Rate Sludge Contact Clarifier, Clariflocculators, Water Clarifier and Water Softener etc. Industrial Filter Press that we offer is a solid liquid separation device that uses the principle of pressure feeding. It has been used successfully in almost every industrial filtration application. It includes a series of filter plates and frames or recessed plates which are arranged alternately. The filter medium is provided in between the plates and a feeding pump is utilized to force the liquid through the medium leaving the solid trapped inside. Compared to other pressure filters the filter press holds more solids per square feet of filtering surface area than any other. A closer is required which can be manual or hydraulically operated. This closer contains a controlling follower plate that presses the plates together and creates a sealed unit. Our Industrial Filter Press is typically less costly to install than compared to rotary drum vacuum filters, belt presses or centrifuges. It is significantly less expensive and easier to maintain & operate then the other three.
Water Softener is charged with a high capacity polystyrene bead cation exchange resin in sodium form. When hard water passes through this resin column, the hardness forming calcium and magnesium salts are replaced with sodium salts which do not possess any hardness properties. This softening process is continuous until the material is exhausted of sodium salts when it is regenerated with a solution of common salt. The units are designed on the advanced counter-current principle that ensures consistent good quality treated water. Water Softener that we provide is available in a wide range of materials like FRP LDPE MS SS with multiport ball diaphragm valves and designed to give a long trouble-free service. Our Water Softener is easy-to-install and does not require any special foundation & needs minimum maintenance.
Advantages :