Ball Valves

Entech Ball valves come in 2 pc / 3 pc design, both full bore/reduced bore, threaded / flanged connection upto 800 class rating.

General Features:

• Blow-out proof stem

• Anti-static device

• Mirror finished SS balls

• Floating / Trunnion type

• Mounting pad to Namur standard-ISO 5211

• End connection, ASME B-16.5

• Face to face dimn-ASME B16.10

• Manufacturing standard-ISO17292

Ball valve range:Wide range from 15mm(1/2) to 350mm (14)
Ball valve automation:Ball valve can be provide with Rotary actuator, Solenoid valve, Limit switch, Manual over-ride as per customer requirement.

Ball Valve with Automation

15mm - 350mm ball valve automation.Floating & Trunion type.Soft & metal seated ball valve.

M'-series Multi spring diaphragm actuators are available in 4 sizes, i.e., 230, 385, 700 & 1400 cm2 (36, 60, 110, 220 Sq.Inch) .If required these actuators can be provided with top mounted hand wheel. These actuators are suitable for regulating and on/off control applications. Full stainless steel version is also optionally available.

General Features:

• Compact yoke mounted Actuator.

• Easy Coupling to valve plug stem.

• Fast response. Very low hysterisis.

• Wide range of travel & spring range.

• Low weight / Long life

If required these actuators can be provided with side mounted hand wheel. These actuators are suitable for regulating and on/off control applications and can be used against aggressive environments with appropriate surface protection.

General Features:

• Wide range of travel and Spring range.

• Quick response.

• Smooth functioning, constant linearity with negligible hysteresis.

• Easy to change fail action on site without any extra parts.

• Easy to assemble and disassemble from valve.

• Various accessories to work during failure of power

• Compact yoke mounted Actuator.

Efficient straight-through flow design allows for a much lower cost per Cv than conventional globe style valves with the same degree of quality. Highly suitable for application including high and low pressure steam, clean, dirty, and corrosive liquids and gases, and erosive and abrasive slurries. Sizes 1 thru 8. Pressure rating class ANSI 150 600. Material WCB, CF8M, Alloys

Cylinders offers liner actuator working as high thrust unit and offers a long stroke. This provides very compact spring return design. Linear motion can be converted to rotary by using eccentric mechanism. Cylinder sizes varies from 38mm (11/2) inch to 150mm (6 inch) diameter.

The eccentric plug valves are used to handle water and the waste water applications. The plug is rubber lined to provide tight shut off against the seat in the body. Eccentric design ensures tight shut off and no leakage. The plug is operated through mechanical actuator to counter high torque. This come in sizes 6 to 48. The weight of a 36 plug valve is about 5 tons.

Swing check valve is designed to effectively prevent reverse flow and is ideally suited for liquid, steam and other gases requiring assured performance, tight shut off and low maintenance. They come in sizes 6 inch to 24 inch. The end connections could be provided as per customer requirement e.g. flange, socket end etc. The material could conform to ASTM standard WCB, WC6, WC9.

ECI couplings are suitable for installation on grooved piping joints. It replaces welded / threaded / flanged connections. It is faster and easier to install. Main features are rigidity and flexibility. Provides positive clamping of pipe to resist torsional and flexural loads. Sizes 19mm () through 305mm (12)

Ball Valves

Entech Ball valves come in 2 pc / 3 pc design, both full bore/reduced bore, threaded / flanged connection upto 800 class rating.

General Features:

• Blow-out proof stem

• Anti-static device

• Mirror finished SS balls

• Floating / Trunnion type

• Mounting pad to Namur standard-ISO 5211

• End connection, ASME B-16.5

• Face to face dimn-ASME B16.10

• Manufacturing standard-ISO17292

Ball valve range:Wide range from 15mm(1/2) to 350mm (14)
Ball valve automation:Ball valve can be provide with Rotary actuator, Solenoid valve, Limit switch, Manual over-ride as per customer requirement.

Ball Valve with Automation

15mm - 350mm ball valve automation.Floating & Trunion type.Soft & metal seated ball valve.

M'-series Multi spring diaphragm actuators are available in 4 sizes, i.e., 230, 385, 700 & 1400 cm2 (36, 60, 110, 220 Sq.Inch) .If required these actuators can be provided with top mounted hand wheel. These actuators are suitable for regulating and on/off control applications. Full stainless steel version is also optionally available.

General Features:

• Compact yoke mounted Actuator.

• Easy Coupling to valve plug stem.

• Fast response. Very low hysterisis.

• Wide range of travel & spring range.

• Low weight / Long life

If required these actuators can be provided with side mounted hand wheel. These actuators are suitable for regulating and on/off control applications and can be used against aggressive environments with appropriate surface protection.

General Features:

• Wide range of travel and Spring range.

• Quick response.

• Smooth functioning, constant linearity with negligible hysteresis.

• Easy to change fail action on site without any extra parts.

• Easy to assemble and disassemble from valve.

• Various accessories to work during failure of power

• Compact yoke mounted Actuator.

Efficient straight-through flow design allows for a much lower cost per Cv than conventional globe style valves with the same degree of quality. Highly suitable for application including high and low pressure steam, clean, dirty, and corrosive liquids and gases, and erosive and abrasive slurries. Sizes 1 thru 8. Pressure rating class ANSI 150 600. Material WCB, CF8M, Alloys

Cylinders offers liner actuator working as high thrust unit and offers a long stroke. This provides very compact spring return design. Linear motion can be converted to rotary by using eccentric mechanism. Cylinder sizes varies from 38mm (11/2) inch to 150mm (6 inch) diameter.

The eccentric plug valves are used to handle water and the waste water applications. The plug is rubber lined to provide tight shut off against the seat in the body. Eccentric design ensures tight shut off and no leakage. The plug is operated through mechanical actuator to counter high torque. This come in sizes 6 to 48. The weight of a 36 plug valve is about 5 tons.

Swing check valve is designed to effectively prevent reverse flow and is ideally suited for liquid, steam and other gases requiring assured performance, tight shut off and low maintenance. They come in sizes 6 inch to 24 inch. The end connections could be provided as per customer requirement e.g. flange, socket end etc. The material could conform to ASTM standard WCB, WC6, WC9.

ECI couplings are suitable for installation on grooved piping joints. It replaces welded / threaded / flanged connections. It is faster and easier to install. Main features are rigidity and flexibility. Provides positive clamping of pipe to resist torsional and flexural loads. Sizes 19mm () through 305mm (12)