Our Products
Optical & Laser Instruments
1 Products availableNoodles Making Machine
1 Products availableMeasurement Gauges & Fittings
1 Products availableOur product range contains a wide range of Ultrasonic testing manipulator / Crawler for Tube Sheet Weld, Ultrasonic testing Manipulator and Crawler for tube sheet weld
Fully Automation possible with Tube selection till Accept / Reject Sorting. (Optional)
Integrated Marking facility with all job details and nomenclature possible. (Optional)
Mobile unit available as per order for service sector. (Optional)
Higher Diameter size Model possible but with less speed.(As per customer requirement
Type | Rotational Probe Head, Tube/Pipe Moving linearly through probe head and Probes are rotating around the tube/pipe. |
Suitable Diameter Range ** | Min. OD – 25 mm / Max. OD – 60 mm. Min. OD – 40 mm / Max. OD – 80 mm. |
Suitable thickness Range ** | Min. WT –1 mm / Max. WT – 6 mm. |
Through-put speed | 5 to 20 meter/minutes Maximum Depend on tube Diameter Range and channel configuration |
Number of Probe Head | One/ Two as per customer requirement of Diameter range. |
Number of probe | 06 Nos / 12 Nos / 22 Nos As per Customer selection of channel configuration. |
Type of probe | Immersion type Line focused probes with frequency ranging From 4 MHz to 10 MHz with short focal length. |
Probe Configuration | XX Nos. probes for Longitudinal Defect detection XX Nos. probes for Transverse Defect detection, XX Nos. probes for Wall thickness measurement |
Medium | DM water |
Water Capacity/feeding | Up to 400 Litters / Pressurized based feeding |
Ultrasonic signal transfer | Slip ring based. |
Application | Suitable for Seamless Cold Draw / Hot rolling Tube/Pipe Suitable for Boiler/Heat Exchanger/ Pressure vessels Tube/pipe |
JOB DETAILES /DIMENSIONES- Stainless steel Tube Outer Dia. is 19.05 mm.
Wall Thickness is 2.11 mm
INSPECTION TECHNIQUE- Pulse- echo non contact (Immersion type)
TRANSDUCERS- Single crystal Immersion type probes, Frequency Ranging from 4 to 6 MHz Crystal Dia. 3 mm Focusing type Line focused / Spot focused whichever will be suitable. (Note: -The combination of search unit size and frequency will be decided after taking In-house Test trial on actual variable jobs)
FLAW DETECTION AND INSPECTION COVERAGE- 100% circumferential weld area for weld defect e.g. lack of fusion, blowhole etc.
INSPECTION (FEED) RATES-Scanning speed is variable as per the PRF selection and depends on the Repeatability of defect detection.
EQUIPMENTE- (Client scope) Ultrasonic Flaw detector Equipment With Encoder input facility
(Note: -The combination of matching hardware for data logger can be selected as per the Output signal type. Client should send the Communication port details for the data Logging software Synchronization. May client has send the equipment at Enricos work place for the trial and Inspection.)
Ultrasonic Thickness Gaugeis a new generation of intelligent ultrasonic thickness gauge, using latest high performance and low power consumption microprocessor technology, based on the principle of ultrasonic measurement, to measure the thickness of metal, glass, ceramics and other materials, and the materials of sound velocity measurement. Is widely used in all kinds of plate, pipe wall thickness, the boiler container wall thickness, all kinds of pipeline and pressure vessel, thickness measurement, monitor them in the process of using the degree of corrosion after thinning.
Model | Frequency MHZ | Diameter mm | Measuring range | Lower limit | Description |
ET-02 | 2 | 14 | 3.0mm~300.0mm(In Steel) 40mm (in Gray Cast Iron HT200) |
20 | for thick, highly attenuating, or highly scattering materials |
ET-05 | 5 | 10 | 1.5mm~200.0mm(In Steel) | Φ20mm×3.0mm | Normal Measurement |
ET-05/90 | 5 | 10 | 1.5mm~230.0mm(In Steel) | Φ20mm×3.0mm | Normal Measurement |
ET-07 | 7 | 6 | 0.75mm~80.0mm (In Steel) |
Φ15mm×2.0mm | For thin pipe wall or small curvature pipe wall measurement |
ET-HT5 | 5 | 14 | 3~200mm (In Steel) | 30 | For high temperature (lower than 350℃) measurement. |
ET-HT7 | 5 | 14 | 3~200mm (In Steel) | 30 | For high temperature (lower than 500℃) measurement. |