Enn Kay Udyog

Chandigarh

OUTER BODY AND INNER BODY STAINLESS STEEL 3 ELEMENTS FOR WATER WARMING ONE TAPE FOR WATER OUTLET INSULATION OF GLASS WOOL AUTOMATIC TEMPERATURE CONTROLLER TWO INDICATOR MAIN AND LOAD 3 HEAT SWITCH STAINLESS STEEL PIPE FITTED ON WHEEL

The company offers Hot Air Oven in standard double wall fabrication. The inner chamber of Hot Air Oven is made up of richly anodized aluminum or highly polished stainless steel sheet. While the exterior is fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish color combinations. The gap between the walls of our Hot Air Oven is filled with-special grade glass-wool for heat insulation. The inner chamber of Hot Air Oven is ribbed for placing shelves at convenient levels. Details :

• Provided with two or three removable shelves
• Special elegant door closing device has been provided
• Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50^oC to 250^oC + 1^oC controlled by capillary type thermostat
• L-shaped thermometer is built-in type
• Control panel is provided with selector switch of high or low rates of power, thermostate control knob and indicators for mains & thermostat
• Supplied with cord and plug
• The equipment is suitable to operate on 220 V AC 50 Hz single phase

Optional :

• Air Circulating fan
• Timer 0-24 hours
• Digital Temp. Indicator-Cum- Controller
• Imported Thermostat EGO/ JUMO German with the accuracy of 1^oC
• Digital temperature Indicator

Minimum Order Quantity : 25 Pieces

We offer Serological Water Bath with Double wall construction. The inner wall of our Serological Water Bath is made up of highly polished thick stainless steel and outer is composed of thick mild steel sheet; finished in stoving white enamel paint or staple mat color combinations. The gap of our Serological Water Bath is filled with special glass wool for temperature insulation.The Serological Water Bath is provided with the drain cock to facilitate easy drain out of water for cleaning the chamber, when required. In addition, we provide a pyramidal shaped cover. Details :

• Immersion type heating elements are fitted at bottom.
• Temperature range5^oC above ambient to 80^oC with accuracy+0.5^oC to 1^oC is controlled by capillary thermostat regulated by a graduated knob on the panel, which is also provided with pilot lamp etc.
• The equipment is workable on 220V AC 50Hz single phase. The baths are supplied without racks, thermometer and stirring arrangement.

Optional :

• Imported Thermostat EGO/JUMO German with the accuracy of 0.5^oC Digital temperature Indicator cum Controller
• Microprocessor PID Digital temperature Indicator- cum- controller
• Digital temperature Indicator

Minimum Order Quantity : 25 Pieces

Universal Water Bath, we offer is the combination of serological and routine rectangular water bath with holes and concentric rings. Our Universal Water Bath is equipped with Immersion heaters for heating to attain temperature range from 5^oC above ambient to 90^oC + 1^oC, and is controlled by O panel. We offer Universal Water Bath with a drain cock to easily drain out the water, whenever needed. The Universal Water Bath is supplied with plug & cord. Details :

• The equipment works on 220V AC to 50Hz single phase
• Equipment has been provided with two covers. One of a pyramidal shape and the other with 75 mm dia. Holes with concentric rings.

Optional :

• Stirring arrangements with Stainless Steel rod & blades
• Imported Thermostat EGO/ JUMO german with the accuracy of 0.5C
• Digital temp. Indicator.
• Digital Temp. Indicator Cum Controller
• Microprocessor PID Digital temp. Indicator Cum Controller

Minimum Order Quantity : 25 Pieces

We offer Paraffin Water Bath which is constructed as per model NU-110 but with glass windows on both opposite sides, for observation. The Paraffin Water Bath, we offer has a temperature controller (mercury thermometer) with a sensitivity of 0.2^oC. Our Paraffin Water Bath is suitable for precision laboratory activities requiring constant temperature with high degree of accuracy. The Paraffin Water Bath, we offer is complete with stirrer with speed control regulator, workable on 220V AC 50 Hz single phase but provided with cups & sleeves for glass tubes. Availability :

• 4 Cups & 6 Sleeves
• 6 Cups & 8 Sleeves
• 12 Cups & 14 Sleeves

Minimum Order Quantity : 25 Pieces

The Laboratory Oil Bath, we offer has double wall construction. Inner chamber of our Laboratory Oil Bath is made of highly polished stainless steel or copper sheet and outer made of mild steel duly finished in stoving enamel. Temperature range of our Laboratory Oil Bath, 50^oC to 250^oC + 2^oC is controlled by a thermostat. We supply our complete Laboratory Oil Bath with stirrer, diffuser shelves, cover, panel with on-off switch, pilot lamps thermostatic control knob etc. Availability (Chamber Size in mm & Inches approx) :

• 250x250x250 (10x10x10)
• 300x300x250 (12x12x10)
• 350x 350x250 (14x14x10)

Optional :

• Mercury contact thermometer and relay with accuracy better than 1^oC
• Imported thermostat EGO/JUMO german with accuracy of 1^oC
• Digital temp. Indicator- Cum- Controller
• Microprocessor PID Digital temp. Indicator- cum- Controller
• Digital temp. Indicator

Minimum Order Quantity : 25 Pieces

OUTER BODY FITTED ON HEAVY IRON ANGEL. INNER DRUM U-SHAPED STAINLESS. SYAINLE STEEL PATTI FOR ATTA KNEADING. CHAPATI 10 K. G., 20 K. G. AND 30 K. G. ARE AVAILABLE.

The BOD Incubator is designed for low temperature incubation and routine determination of Bio-Chemical Oxygen Demand (B.O.D.). We offer BOD Incubator, which has double wall construction. The inner chamber of BOD Incubator, we offer is made of richly anodized aluminum or highly polished stainless steel sheet with self supports for wide range of shelf spacing. Our BOD Incubator is supplied with two/three removable perforated shelves. Details :

• Exterior made of thick mild steel sheet duly finished in white stoving enable paint or pastel mat finish color combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature.
• Door operated inner illumination has been provided. The gap between walls of equipment is filled with glass wool for temperature insulation. The cabinet is mounted on castors.
• Temperature is controlled by a sensitive thermostat from 5^oC to 50^oC + 1^oC. For lower temperature working, a standard cooling unit with a sealed compressor and protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temperature working.
• The temperature can be regulated within the range by means of a high precision double action thermo regulator. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators, on off switch, L-shaped thermometer. Supplied with cord and plug etc. equipment is workable on 220 V AC 50 Hz single phase.

Optional :

• Timer 0-24 hours day night cycle
• Co₂/air mixer nozzle is provided
• Internal illumination with 3 fluorescent tubes
• Digital temp. Indicator- Cum Controller
• Automatic Voltage Stabilizer 3-5 KVA is recommended

Minimum Order Quantity : 25 Pieces

We offer Electric Heated Sterilizer, which is sterilized under saturated steam of adjustable pressure of 10 to 20 PSI.The Electric Heated Sterilizer has a double walled construction with boiler and steam jacket made of thick stainless steel. The gap of our Electric Heated Sterilizer is filledwith high grade glass wool to bring the temperature loss to a minimal level. The outer chamber of Electric Heated Sterilizer is made outof thick mild steel. Details :

• The lid of Electric Heated Sterilizer is made of thick stainless steel plate (joint less) or gunmetal plate and canbe sealed by a joint less neoprene rubber gasket and wing nuts, through hinged bolts by engagingslotted lugs on rim of the cover.
• Our Electric Heated Sterilizer is provided with dial pressure gauge, air/ steam release cock, springloaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy+3 psi.
• A drain cock along with double safety valve has also beenprovided with inlet.Supplied complete but without dressing bins.

Optional :

• Automatic low-water level cut off- device
• Pressure Control switch.
• Water lever arrangement
• Dressing bins for various size

Minimum Order Quantity : 25 Pieces

We offer Water Bath Incubator Shaker that is useful for studies on tissue metabolism, enzymes, protein coagulation and other experiments; demanding shaking at constant speed under controlled temperature conditions. We offer Water Bath Incubator Shaker, which has double walled construction; inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steel duly finished in stoving enamel paint. The lid is made of stainless steel. The gap in our Water Bath Incubator Shaker, between the two chambers is filled with glass wool to prevent loss of heat. Details :

• The temperature in the Water Bath Incubator Shaker is achieved by superior immersion heater and is controlled by capillary type thermostat from ambient to 90^oC+ 0.5^oC.
• The shaking mechanism in Water Bath Incubator Shaker is fitted with variable speed motor couple to shaking tray working on rollers.
• Shaking speed is controlled from tray working on rollers. Shaking speed is controlled from 40 to 140 cycles per minute. Shaking tray can hold either test tubes or flasks of 25ml. or 100ml. capacity.
• Front panel includes on-off switch, shaking mechanism indicator, speed control, thermostat control etc.
• L-shaped thermometer is provided to indicate inside temperature. Equipment to work on 220V AC 50Hz single phase.

Optional :

• Microprocessor Thermostat EGO/JUMO german with the accuracy of 0.5^oC
• Digital Temperature Indicator
• Digital Temperature Indicator- Cum- Controller
• Microprocessor PID Digital Temperature Indicator Cum- Controller
• Shaking tray for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or conical flaks

Minimum Order Quantity : 25 Pieces

We offer Laboratory Rectangular Muffle Furnace, whose outer shell is made up of thick mild steel, duly finished in attractive stovingenamel paint. Our Laboratory Rectangular Muffle Furnace is fitted withgrooved refractory for supporting the heating elements made out of kanthal wire and is easilyreplaceable. The Maximumtemperature of our Laboratory Rectangular Muffle Furnace, 1000^oC with working temperature 940^oC is controlled by SUNVIC energyregulator. Size Availability (Inner Muffle size in mm & Inches) :

• 225x100x100 (9x4x4)
• 250x125x125 (10x5x5)
• 300x125x125 (12x5x5)
• 300x150x150 (12x6x6)
• 300x200x200 (12x8x8)
• 350x175x125(14x7x5)
• 475x175x125 (19x7x5)
• 450x225x225(18x9x9)

Optional : Digital temp. Indicator- Cum Controller instead of energy regulator and pyrometer

We have designed the Mortuary Chamber, to store cadaverous, under cool conditions to prevent decomposition. Our Mortuary Chamber is provided with double walled construction; outer made out of thick mild steel sheet duly finished in stoving enamel paint and inner made out of stainless steel sheet. We have filled the in between gap of our Mortuary Chamber with glass wool for temperature insulation. We offer Mortuary Chamber with front Opening covered with double walled door with magnetic gasket, lock & key and handle. Details :

• Individual chambers are provided with handles on both ends travel and rollers fitted on ball bearing for smooth movement
• The refrigeration unit is fitted on the rear top
• Temperature of 2^oC to 4^oc is maintained by hermetically sealed compressor unit and is controlled by an automatic electronic digital temperature controller cump Indicator.
• Panel is provided with indicator & Controllers etc. Completed with cord & plug.
• The unit is to work on 220V AC 50 Hz single phase

Optional : Automatic Voltage Stabilizer 3KVA must. Minimum Order Quantity : 25 Pieces

OUTER AND INNER BODY STAINLESS. AUTOMATIC TEMPERATURE CONTROLLER. 3 HEAT SWITCH. HEATING ELEMENT OF KANTHAL WIRE.

HEAVY DUTY WASHING MACHINE 

OUTER BODY HEAVY GUAGE MILD STILL WITH PAINTED 

WOODEN ROTAR FITTED ON STAINLESS STEEL 

MOTOR CAPACITY 2 HP

AUTOMATIC GEARBOX FOR FORWARDING AND REVERSE 

Refrigerated Water Bath, we offer is designed to deliver excellent services. The Refrigerated Water Bath that the company manufactures is double walled thus highly durable. We offer Refrigerated Water Bath in two different models. Our Refrigerated Water Bath is fitted with a stirrer and speed regulator. Model 1 : Details :

• Our Refrigerated Water Bath has standard double walled construction.
• The inner chamber is made up of 50^oC to 90^oC and controlled by a sensitive mercury contact thermometer, with an accuracy of + 2^oC.
• Fitted with a stirrer and speed regulator.

Specifications :

• Chamber size : 500 x 250 x 250 mms
• Capacity (Approx) : 32 litres

Optional :

• Digital Temperature Indicator-Cum-Controller instead of contact thermometer.
• Microprocessor Pid Digital Temperature Indicator- Cum- Controller instead of contact thermometer.

Model 2 : Details :

• Standard construction
• Inner chamber made out of stainless steel sheet with digital temperature Controller-Cum-indicator.
• Temperature control range from 20^oC to+2^oC.

Specifications :

• Chamber size : 450x300x300 mms
• Capacity (Approx) : 42 litres

Optional : Microprocessor PID Digital temperature Indicator Cum- Controller Minimum Order Quantity : 25 Pieces

The outer shell of our Industrial Rectangular Muffle Furnace is made out of thick mild steel duly finished in attractive stoving enamel paint. The Industrial Rectangular Muffle Furnace, we offer is fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. The Industrial Rectangular Muffle Furnace has Sunvic energy regulators. Availability (Muffle Size in mm & Inches) :

• 225x100x100 (9x4x4)
• 250x125x125 (10x5x5)
• 300x150x150 (12x6x6)
• 300x200x200 (12x8x8)
• 450x225x225 (18x9x9)
• 1400^oC Muffle Furnace can be offered on demand.

Optional : Microprocessor PID Digital temp. Indicator- Cum- Controller Minimum Order Quantity : 25 Pieces Note : Maximum temperature 1000^oC with working temperature of 940^oC controlled by SUNVIC energy regulator but maximum temperature 1150^oC with working temp. 1100^oC

Our Seed Germinator is suitable for conducting various experiments on seed germination. With the help of the Seed Germinator, different environmental conditions can be created and controlled as per requirement. We offer the Seed Germinator in double walled construction; inner made of anodized aluminum or highly polished stainless steel sheet and outer made out of thick mild steel sheet duly finished in stoving enamel paint. The gap is filled with glass wool to insulate loss of temperature. We offer Seed Germinator with the temperature range of 5^oC to 50^oC1^oC, controlled & indicated by a digital controller-cum-indicator. Humidity in Seed Germinator is created by heating water is a stainless steel chamber by an immersion heater from ambient to 95% 3% RH and is controlled by a humidistat. Details :

• We provide Seed Germinator with a full view inner clear acrylic door and double walled outer door, with magnetic gaskets
• Inner chamber (Open able for day light) has been installed with fluorescent illumination to create photo-simulation
• We provide an air circulation fan to maintain uniform temperature in the whole chamber
• For cooling a sealed compressor unit has been provided below the chamber to work independently
• Supplied complete with 14 adjustable perforated trays, on off switches, pilot lamps, other controls, cord & plug etc
• The equipment works on 220v AC 50 Hz single phase

Specifications :

• Seed Germinator (Single Chamber) :
• Size : 555(W) x 910 ( H) x 605 (D) mm
• Capacity : 308liters
• Seed Germinators (Dual Chamber) :
• For cooling a sealed compressor unit has been provided below the chamber to work independently.
• Each Chamber size 555(W)x 910(H)605(D)mm
• Heating and cooling in separate chambers made of anodizes aluminum.
• Chambers made of stainless steel sheet.
• Heating and cooling in both chamber and chamber made of anodized aluminum.
• Heating and cooling in both chamber and chamber made of stainless steel sheet.

Optional :

• Automatic 0-24 hours timer to regulate illuminate conditions.
• Automatic Voltage Stabilizer 3KVA (Recommended).

Minimum Order Quantity : 25 Pieces