Enhance Eco Tech Solution Pvt Ltd

Charmswood Village, Faridabad, Haryana

We provide Sewage Treatment Plants on turnkey basis. These Sewage Treatment Plants are set up for the treatment of the sewage waste that is produced by canteens, residential colonies etc. These involve collection, primary treatment, biological treatment and tertiary treatment to make it recyclable. We design the Biological Treatment Plants based on proven extended aeration technology, which is either based on suspended growth or attached growth as in the case of Fluidized Aerobic Bioreactor and Submerged Aerobic Fixed Film reactor. The selection of technology is based on capacity of plant, the operating staff at site and the investment capacity.

Sewage treatment Plant, or domestic wastewater treatment, is the process of removing contaminants from wastewater and household sewage, both runoff (effluents) and domestic. The task of designing and constructing facilities for treating wastewaters falls to environmental engineers. They employ a variety of engineered and natural systems to get the job done, using physical, chemical, biological, and sludge treatment methods. Its objective is to produce a waste stream (or treated effluent) and a solid waste or sludge suitable for discharge or reuse back into the environment. This material is often inadvertently contaminated with many toxic organic and inorganic compounds.

• The nature of the municipal and industrial wastes that are conveyed to them by sewers
• The amount of treatment required to preserve and/or improve the quality of the receiving bodies of water.

Discharges from treatment plants usually are disposed by dilution in rivers, lakes, or estuaries. They also may be used for certain types of irrigation (such as golf courses), transported to lagoons where they are evaporated, or discharged through submarine (underwater) outfalls into the ocean. However, outflows from treatment works must meet effluent standards set by the Environmental Protection Agency to avoid polluting the bodies of water that receive them.

• Aerobic STP :

  Oxygen/Air is continuously supplied to the Biological (Aeration) Reactor either by direct Surface Aeration system using Impellers propelled by Pumps or Submerged Diffused Aeration system using Air Root Blowers for Air supply through diffusers. Aerobic condition leads to complete oxidation of Organic Matter to Carbon Dioxide, Water, Nitrogen etc. thus eliminating Odor problem caused due to incomplete oxidation. Also Air supply aids in uniform and efficient mixing inside the tank.

• Anaerobic STP :

  Here sewage partially decomposed in closed Biological Reactor in absence of Air which leads to reduction of Organic Matter into Methane, Hydrogen Sulfide, Carbon Dioxide etc. The plant is widely used to treat wastewater sludge and organic waste because it provides volume and mass reduction of the input material to a large extent.

We offer hi-end Reverse Osmosis Plant. In our Reverse Osmosis Plant, the method of Reverse osmosis (RO) is used for purifying water for industrial processes and human consumption. RO can remove mineral salts and contaminants such as bacteria and pesticides. Advances in water treatment technologies have enhanced and complemented the conventional RO process, reducing energy and water consumption, lowering capital and operating costs, and producing purer water with our Reverse Osmosis Plant.

Reverse osmosis separation technology is used to remove dissolved impurities from water through the use of a semi-permeable membrane. RO technology involves the reversal of flow through a membrane from a high salinity, or concentrated solution to the high purity, or "permeate", stream on the opposite side of the membrane. Pressure is used as the driving force for the separation. The applied pressure (P) must be in excess of the osmotic pressure of the dissolved contaminants to allow flow across the membrane.

Reverse osmosis(RO), also known as hyper filtration, is used by ourCommercial & Industrial Brackish Water&Seawater Reverse Osmosis Systemstopurify waterby removing salts and other impurities. Our Reverse Osmosis Plant is also capable of rejecting bacteria, sugars, proteins, particles, dyes, and other constituents that have a molecular weight of greater than 150-250 daltons.

• Schools and Colleges
• House and Residential Complexes
• Hospitals : Produce High purity water use in dialysis units
• Corporate and multistory Buildings
• Industries

• Lead from the raw water
• Bacteria
• Cysts and Organic Chemicals
• Dissolved Solids
• Suspended Solids Down to five microns in size

We offer highly efficient Demineralization Plant for removing the dissolved ionic material from water by demineralization process. This process is followed to obtain pure water with the use of the latest machines at our Demineralization Plant. Demineralization takes place in an ion exchange unit called as demineralizer or deionizer that consists of cation bed, an anion bed and a mixed bed in series. The mixed bed consist of both cation and anion resins and is called as polisher. The mixed bed provides the highest ion removal efficiency.

We are the top notchManufacturer and Supplier of Demineralization Plantwhich finds extensive applications in various industries. The Demineralization Plantsensure a complete removal of all dissolved minerals present in water by the use of anion and cation resin technology. The process is called "demineralization process". The extensive range of Demineralization Plants offered from our end is widely used in diverse industrial as well as other applications.

• Features advanced designs to perform effectively and produce superior results
• Manufactured as per the specifications mentioned by clients
• Uncompromising quality standards
• Great results
• High capacity

The Effluent Treatment Plants are designed to treat the effluent coming from different areas of the plant. The treatment of different effluents varies with the type of effluent. Water Effluent Treatment Systems are designed to treat effluent mainly containing oily effluent. The water from the Transformer Area, Turbine building, Workshop etc., is collected in common collection sump from where water is pumped through the Plate Interceptor.

With the increase in the number industries, there has been an increase in the release of compounds of heavy metals and synthesized organic compounds into water causing its pollution. The industries are adding some 10, 000 new organic compounds each year. Our company holds great reputation in the market as a Manufacturer, and Supplier of hi-end Effluent Treatment Plants (ETP). We have over a decade of experience in making and delivering effluent water treatment plants. These ETPs are based on cutting-edge technology.

Further, the technological changes in manufacturing process have resulted into more addition of compound discharge. Conventional waste water treatment process is not efficient to treat the polluted water. With this thought in mind, we offer top-quality industrial effluent treatment plants which are highly appreciated by our clients for their effectiveness, easy handling, less maintenance, and affordable prices.

Our Effluent Treatment Plant and System is based on the aerobic respiration method; it consists of three stages namely primary treatment, secondary bio-treatment, and tertiary treatment. The effluent water is passed through various processes such as chemical dosing, aeration, and settling. The final treatment filtration cum absorption takes place by filters. Finally, the processed water goes for advance treatment and we get usable water, which can be used further, for irrigation and other purposes.

Ultra Filtration Plants that we offer have a membrane fractionation process used to separate and concentrate macro-molecules and colloids from water. Our Ultrafiltration Plant is equipped with modern machines and with the use of the advanced technology the filtration of water is achieved. Our Ultrafiltration Plant works on the principle of Ultra Filtration which is most reliable and economical solution for the removal of impurities such as bacteria, heavy metals and suspended solids. Substances smaller than the particle size of the membrane are passed while large solutes or particles are rejected. The typical molecular weight cut off (M.W.C.O.) of Ultra Filtration membranes ranges from 1, 000 to 1, 00, 000 daltons. Because of its larger pore size, it does not reject dissolved salts but removes colloidal solids such as silica, iron and some T. O. C. contaminants. UF Membranes also have a wide range of pH and temperature tolerance and are easily backwash able, to avoid membrane fouling.

• Removal of colloidal silica from water, etc
• Chemical processing and electrode position paint recovery
• Water and waste treatment
• Food processing

• The pre-treatment by pre-UF needs only 20-30% space as compared to conventional pre-treatment system
• There is no biological growth in the filtration system, because of non - stagnant fluid flow
• Less civil costs and faster installation
• Less energy consumption
• Reduced waste disposal
• Lower operating costs

We serve the clients by making available the optimum quality Tube Pac Media. Our Tube Pac Media is also known as Tube Settler Media and is used for increasing the capacity of clarifier. The installation of our Tube Pac Media is fast and easy which makes them even more demanded. We make available Tube Pac Media in specifications as demanded by the clients.

• Increases capacity of clarifier
• Enhances particle agglomeration and growth
• Increases capacity of clarifier
• Enhances suspended solids concentration

• Industries where this product is used : Where waste water is generated
• Colors & packaging available : Black & Poly Bags
• Sizes available : 750 MM, 1000 MM or, As per clients requirements
• Raw Material Used : Polypropylene

We serve the clients by offering the superior quality Fine Bubble Diffuser. Our range of Fine Bubble Diffuser is widely demanded for fine bubble diffused aeration. These Fine Bubble Diffusers are made using high quality raw materials and have a long usable life. Coming with easy and fast installation features, our Fine Bubble Diffuser is highly demanded.

• Industries where this product is used : Where waste water is generated
• Colors & packaging available : Black & Poly Bags
• Raw Material Used : EPDM & Silicon

• Increases capacity of clarifier
• Enhances particle agglomeration and growth
• Increases capacity of clarifier
• Enhances suspended solids concentration
• Installation is fast and easy

Specifications

We make available the optimum quality Bio Pac Media to the clients. Our Bio Pac Media is commonly available with the name of FAB MEDIA / MBBR MEDIA 22. Our Bio Pac Media is known for offering clog-free operation and is also appreciated for less sensitivity to the shock loading. With our Bio Pac Media, no backwash is needed and it is also easy to install.

• No channels or dead spots
• Provides high Bio - Surface Area
• Make Bio-Reactors extremely compact
• No Sludge return Systems Needed
• Longer Media Life

• Industries where this product is used : Where waste water is generated
• Colors & packaging available : Black & Poly Bags
• Sizes available : 16 MM X 22 MM
• Raw Material Used : Poly propylene

We bring forth the superior quality Coarse Bubble Disc Diffuser Our Coarse Bubble Disc Diffuser is formulated for waste water chemical environment and remains effective for a long time. Coarse Bubble Disc Diffuser, offered by us, is appreciated for offering maximum oxygen transfer with low maintenance needs. Furthermore, our Coarse Bubble Disc Diffuser offers high resistance to clogging and corrosion.

• The fine bubble membrane which has one year guarantee is specially formulated for waste water chemical environment
• The standard diffuser pipe thread makes it convenient to replace other coarse/old bubble diffusers
• The precision perforated I shaped slit holes open when airflow comes, close when airflow pressure drops, resist tearing and stay clean longer
• Wide air flow range

• Industries where this product is used : Where waste water is generated
• Colors & packaging available : Black & Poly Bags
• Sizes available : 80 MM , 150 MM
• Raw Material Used : EPDM & Silicon

Catering to the requirements of diverse industries, we bring forth technically advanced Water Pollution Control System. We are a reliable Water Pollution Control System Manufacturer and Supplier in Faridabad, Haryana. The precision-engineered Water Pollution Control System is extensively required for industrial effluent treatment and disposal. The Water Pollution Control System promises great economy in its pricing and working.

• Long service life
• Designed to perfection
• Easy to install
• Latest technology make

We are a well-known Manufacturer and Supplier of high capacity Water Softener Plant. These Water Softener Plants are available as per the customized requirements of the clients in mid size and high capacity variants as well. The Water Softener Plant is equipped with the high capacity water softeners which work effectively by removing the other impurities present in the water. We manufacture superior grade Water Softeners and Purifiers which effectively discard all the impurities and make the water pure. Further, the purifiers at our Water Softener Plant are also provided with a special membrane separator which is suitably affixed to de-concentrate a wide variety of chemically or mechanically emulsified solutions.

• Equipped with advanced machines
• Easy to install
• Low maintenance needs
• Suitable for cleaning all types of emulsified solutions

Our expertise lies in designing and manufacturing Air Pollution Control System. We are established as Air Pollution Control System Manufacturer and Supplier in Faridabad, Haryana. The Air Pollution Control System is made at our highly sophisticated unit by using the latest techniques and methodologies. Our Air Pollution Control System is highly effective to control air pollution. Besides, one can get the Air Pollution Control System customized as per the specific requirements.

• High performance
• Designed to perfection
• Easy to install
• Requires least maintenance

We are one of the leading organizations engaged in the manufacturing and supplying of Sound Pollution Control System, which finds extensive applications in diverse industries. The Sound Pollution Control System is fabricated using the optimum quality parts and components that ensure high performance and long service life. Further, we offer Sound Pollution Control System at cost-effective prices. Sound Pollution Control System can also be customized as per our client's specifications.

Why Our Sound Pollution Control System?

• Compact designs
• Long service life
• Latest technology make
• Easy installation