Other Products / Services #30553

We are a renowned Manufacturer and Supplier of Polyetheretherketone(PEEK) Our Polyetheretherketone(PEEK) offers the best chemical resistance than any other Polyetheretherketone(PEEK). It has great mechanical properties and can retain its properties up to a temperature of 300^oC. Our Polyetheretherketone(PEEK) is known to have replaced metal in some of the most severe end-use environment. The Polyetheretherketone(PEEK) can be purchased from us to be used in aircraft hardware and fasteners, dental cassettes and devices, etc.

Key Features :

• Exceptional chemical resistance to organics, acids and bases
• High mechanical strength in excess of 250^oC
• Very good wear and abrasion resistance
• Low CLTE and high limiting PV properties
• Best-in class fatigue resistance
• Excellent dimensional stability
• Excellent resistance to hydrolysis in boiling water and superheated steam
• Superior dielectric with low loss at high temperatures and frequencies
• Ease of processing
• High purity

Typical Applications :

• Aircraft Hardware and fasteners
• Aircraft mechanical components
• Automotive electrical/electronic
• Transmissions/powertrain
• Semiconductor fabrication and testing
• Medical devices
• Dental cassettes and devices
• Oil and gas processing equipment
• Bearing retainers
• Gears
• Bushings
• Seals
• Thrust washers

We are a prominent name as Manufacturer and Supplier of Cast Nylon. Our Cast Nylon has high mechanical strength and is anti-corrosive in nature. We have invested in advanced machinery and have expert knowledge of the high-tech manufacturing techniques, which helps us in the preparation of the best quality Cast Nylon. Our Cast Nylon is used in bushes, rollers, gears and has many more applications. We supply Cast Nylon all over India in excellent packaging.

Key Features :

• High Mechanical Strength
• Good Fatigue resistance
• Wear and Abrasion resistance
• Impact and shock resistance
• Mechanical Damping
• Corrosion resistance

Our Polybutyle Terephthalate is a thermoplastic engineering polymer that is used as an insulator in the electrical and electronics industries. It is a thermoplastic semi-crystalline polymer, and a type of polyester. Polybutyle Terephthalate is resistant to liquids, shrinks very little during forming, is mechanically strong and can resist heat up to 150 °C. Also, it can be treated with flame retardants to make it non-combustible.

Key Features :

• Excellent Dimensional Stability
• Mechanically tough and rigid
• Excellent Wear resistance
• Low coefficient of friction
• Good chemical resistance
• Low moisture absorption
• Abrasion resistant
• FDA compliant in natural and black

Typical Applications :

• Synthetic Fibers
• Precision mechanical parts
• Beverage, food and liquid containers
• Thermoforming applications

We deal in excellent quality Sulfonic Polymers. Our Sulfonic Polymers are amorphous thermoplastics, which offer good performance at high temperatures. The Sulfonic Polymers allow load bearing due to their high mechanical and thermal properties. Other important features of our Sulfonic Polymers are that they are good chemical and solvent resisters. The ability of Sulfonic Polymers to bear with common sterilization techniques makes their role very crucial in the medical and food processing industry.

Key Features :

• Good Impact resistance
• Low moisture absorption
• Excellent radiation resistance
• Good chemical resistance
• Exceptional hydrolytic stability

Typical Applications :

• Medical equipment
• Food Processing
• Semiconductor
• Electrical
• Petroleum

We are a prominent name in the industry for the manufacturing and supplying of excellent quality Ultem. Our Ultem is known for its various properties like outstanding thermal resistance, strength and high resistance to a wide range of chemicals. Our Ultem is used in chemical processing, food processing, aircraft industry, etc. It is also used in making valves and components. We book bulk orders and ensure timely delivery of the placed order.

Key Features :

• Long term heat resistance
• Outstanding strength and stiffness up to 3900 F
• Exceptional long-term hydrolytic stability
• Predictable dimensional stability
• Environmental stress and cracking resistance
• Inherently flame retardant
• High dielectric strength
• Transparent
• Excellent machinability

Typical Applications :

• Structural components that require strength and rigidity at elevated temperatures
• Chemical Processing
• Medical devices
• Aircraft components
• Pump and Valve parts
• Food processing equipment
• Automotive

We are a renowned Manufacturer and Supplier of Polyoxymethyelene(POM) , Rod  Plates and Machine Components. It is a crystalline plastic in appearance. The Polyoxymethyelene(POM) absorbs very less moisture and is hence suitable for wet areas. Due to low internal stress, the raw material is easily machined and fabricated. We supply Polyoxymethyelene(POM) all over India and provide excellent packaging facility to our buyers.

Key Features :

• High tensile strength and tensile modulus
• Low co-efficient of friction
• Continuous rigidity and strength at temperatures up to 85° C
• Exceptional resistance to wear, impact and creep in wet and dry environments
• High resistance to hydrocarbons, solvents and neutral chemicals
• Dimensionally stable
• Very low moisture absorption
• Easily machined and fabricated

Typical Applications :

• Pistons and valves
• Pump components
• Manifolds
• Rollers
• Fittings
• Food product forming dies
• Wear strips
• Timing screws
• Gears, bearings and bushings
• Electrical insulator parts

We have a rich experience in the manufacturing and supplying of Polyethylene Terepthalate. Our Polyethylene Terepthalate is resistant to water and wear, has great dimensional stability and is mechanically tough. The Polyethylene Terepthalate is used in synthetic fibers, beverages, foods and liquid containers, and thermoforming applications. We offer our Polyethylene Terepthalate in quality-approved packaging and ensure delivery in promised frame of time. Buyers can buy Polyethylene Terepthalate in bulk from us.

Key Features :

• Excellent Dimensional Stability
• Mechanically tough and rigid
• Excellent Wear resistance
• Low coefficient of friction
• Good chemical resistance
• Low moisture absorption
• Abrasion resistant
• FDA compliant in natural and black

Typical Applications :

• Synthetic fibres
• Precision mechanical parts
• Beverage, food and liquid containers
• Thermoforming applications

We have a rich experience in the manufacturing and supplying of Polymer Based Machined Parts. We manufacture only quality plastics that are 100% metal-contamination free. We can provide a wide range of Polymer Based Machined Parts for various purposes. Our Machined Parts are custom made so as to meet the diverse requirements of our valuable customers. We package Polymer Based Machined Parts in quality-approves bags so that their quality is not hampered during transportation.

We are reckoned for making available the best quality Polycarbonate. The Polycarbonate, we bring forth, is a translucent engineering thermoplastic with great tensile strength, heat resistance capacity up to 145°C and excellent elasticity. It absorbs very less moisture. Our Polycarbonate is widely used in electrical industry, aerospace industry, medical industry and many other industries. Polycarbonate can be purchased in bulk from us. We ensure timely delivery of the desired order.

Key Features :

• High tensile, shear and flexural strength
• Excellent toughness
• Continuously resists heat deformation to 145°C
• UL V-0 flame resistance
• Excellent electrical properties
• Low moisture absorption
• Good acid resistance
• Low coefficient of thermal expansion
• Ease of machining

Typical Applications :

• Electrical connectors, insulators
• Aerospace components
• Automotive parts
• Medical equipment parts
• Appliance components
• Manifolds
• Rollers, handles

We offer ACETAL BUSH.For your information we are a Company manufacturing Stock Shapes - Rods, Plates, Tubes and Machined Parts of Engineering Plastics like Polyamide ( Nylon) POM (Delrin), and High Performance Plastics like PET, PBT, Polycarbonate, Polysulfones, PVDF, Ultem , PEEK etc. Our manufacturing facility is located at Bangalore India where we utilize, Extrusion, Reactive Processing and Compression Moulding to produce the Stock Shapes. We produce Finished Machined Parts using Conventional and CNC Machines under the same roof from our only Plastics machining facility. This avoids any contamination with metals - of great importance to Health Care Equipment and Electrical Equipment Industries. We are certified under ISO 9001-2008 Quality System. We are also certified by UL ( Under Writers Laboratory ) and some of the Products carry NSF ( National Sanitary Foundation Certificates ). We are an OEM supplier to many discerning Companies including GE Health Care. A copy of our Product Literature is enclosed along with. For your more information we have our sister concern in the name of QUANTUM POLYMERS CORP. , USA . Having manufacturing unit at Newark , De , USA, who are manufacturers of various High Performance Polymers including PVDF in the form of Rods , Tubes & Plates. We proudly say that we are the only company in the world who can extrude rods of CARBON FIBER FILLED PEEK & GLASS FIBRE FILLED PEEK OF 8 DIA. We will be happy to hear from you regarding your requirements. Thanks & Regards Sunil Hanchate

We offer PET RODS & PLATES.For your information we are a Company manufacturing Stock Shapes - Rods, Plates, Tubes and Machined Parts of Engineering Plastics like Polyamide ( Nylon) POM (Delrin), and High Performance Plastics like PET, PBT, Polycarbonate, Polysulfones, PVDF, Ultem , PEEK etc. Our manufacturing facility is located at Bangalore India where we utilize, Extrusion, Reactive Processing and Compression Moulding to produce the Stock Shapes. We produce Finished Machined Parts using Conventional and CNC Machines under the same roof from our only Plastics machining facility. This avoids any contamination with metals - of great importance to Health Care Equipment and Electrical Equipment Industries. We are certified under ISO 9001-2008 Quality System. We are also certified by UL ( Under Writers Laboratory ) and some of the Products carry NSF ( National Sanitary Foundation Certificates ). We are an OEM supplier to many discerning Companies including GE Health Care. A copy of our Product Literature is enclosed along with. For your more information we have our sister concern in the name of QUANTUM POLYMERS CORP. , USA . Having manufacturing unit at Newark , De , USA, who are manufacturers of various High Performance Polymers including PVDF in the form of Rods , Tubes & Plates. We proudly say that we are the only company in the world who can extrude rods of CARBON FIBER FILLED PEEK & GLASS FIBRE FILLED PEEK OF 8 DIA. We will be happy to hear from you regarding your requirements.

We offer PET ROLLER.For your information we are a Company manufacturing Stock Shapes - Rods, Plates, Tubes and Machined Parts of Engineering Plastics like Polyamide ( Nylon) POM (Delrin), and High Performance Plastics like PET, PBT, Polycarbonate, Polysulfones, PVDF, Ultem , PEEK etc. Our manufacturing facility is located at Bangalore India where we utilize, Extrusion, Reactive Processing and Compression Moulding to produce the Stock Shapes. We produce Finished Machined Parts using Conventional and CNC Machines under the same roof from our only Plastics machining facility. This avoids any contamination with metals - of great importance to Health Care Equipment and Electrical Equipment Industries. We are certified under ISO 9001-2008 Quality System. We are also certified by UL ( Under Writers Laboratory ) and some of the Products carry NSF ( National Sanitary Foundation Certificates ). We are an OEM supplier to many discerning Companies including GE Health Care. A copy of our Product Literature is enclosed along with. For your more information we have our sister concern in the name of QUANTUM POLYMERS CORP. , USA . Having manufacturing unit at Newark , De , USA, who are manufacturers of various High Performance Polymers including PVDF in the form of Rods , Tubes & Plates. We proudly say that we are the only company in the world who can extrude rods of CARBON FIBER FILLED PEEK & GLASS FIBRE FILLED PEEK OF 8 DIA. We will be happy to hear from you regarding your requirements. Thanks & Regards Sunil Hanchate Engineered Polymers (India) Pvt. Ltd.Mumbai , India

We offer PET BUSH.For your information we are a Company manufacturing Stock Shapes - Rods, Plates, Tubes and Machined Parts of Engineering Plastics like Polyamide ( Nylon) POM (Delrin), and High Performance Plastics like PET, PBT, Polycarbonate, Polysulfones, PVDF, Ultem , PEEK etc. Our manufacturing facility is located at Bangalore India where we utilize, Extrusion, Reactive Processing and Compression Moulding to produce the Stock Shapes. We produce Finished Machined Parts using Conventional and CNC Machines under the same roof from our only Plastics machining facility. This avoids any contamination with metals - of great importance to Health Care Equipment and Electrical Equipment Industries. We are certified under ISO 9001-2008 Quality System. We are also certified by UL ( Under Writers Laboratory ) and some of the Products carry NSF ( National Sanitary Foundation Certificates ). We are an OEM supplier to many discerning Companies including GE Health Care. A copy of our Product Literature is enclosed along with. For your more information we have our sister concern in the name of QUANTUM POLYMERS CORP. , USA . Having manufacturing unit at Newark , De , USA, who are manufacturers of various High Performance Polymers including PVDF in the form of Rods , Tubes & Plates. We proudly say that we are the only company in the world who can extrude rods of CARBON FIBER FILLED PEEK & GLASS FIBRE FILLED PEEK OF 8 DIA. We will be happy to hear from you regarding your requirements. Thanks & Regards Sunil Hanchate

We offer PVDF ROLLER.For your information we are a Company manufacturing Stock Shapes - Rods, Plates, Tubes and Machined Parts of Engineering Plastics like Polyamide ( Nylon) POM (Delrin), and High Performance Plastics like PET, PBT, Polycarbonate, Polysulfones, PVDF, Ultem , PEEK etc. Our manufacturing facility is located at Bangalore India where we utilize, Extrusion, Reactive Processing and Compression Moulding to produce the Stock Shapes. We produce Finished Machined Parts using Conventional and CNC Machines under the same roof from our only Plastics machining facility. This avoids any contamination with metals - of great importance to Health Care Equipment and Electrical Equipment Industries. We are certified under ISO 9001-2008 Quality System. We are also certified by UL ( Under Writers Laboratory ) and some of the Products carry NSF ( National Sanitary Foundation Certificates ). We are an OEM supplier to many discerning Companies including GE Health Care. A copy of our Product Literature is enclosed along with. For your more information we have our sister concern in the name of QUANTUM POLYMERS CORP. , USA . Having manufacturing unit at Newark , De , USA, who are manufacturers of various High Performance Polymers including PVDF in the form of Rods , Tubes & Plates. We proudly say that we are the only company in the world who can extrude rods of CARBON FIBER FILLED PEEK & GLASS FIBRE FILLED PEEK OF 8 DIA. We will be happy to hear from you regarding your requirements. Thanks & Regards Sunil Hanchate

we offer Pvdf Bush.For your information we are a Company manufacturing Stock Shapes - Rods, Plates, Tubes and Machined Parts of Engineering Plastics like Polyamide ( Nylon) POM (Delrin), and High Performance Plastics like PET, PBT, Polycarbonate, Polysulfones, PVDF, Ultem , PEEK etc. Our manufacturing facility is located at Bangalore India where we utilize, Extrusion, Reactive Processing and Compression Moulding to produce the Stock Shapes. We produce Finished Machined Parts using Conventional and CNC Machines under the same roof from our only Plastics machining facility. This avoids any contamination with metals - of great importance to Health Care Equipment and Electrical Equipment Industries. We are certified under ISO 9001-2008 Quality System. We are also certified by UL ( Under Writers Laboratory ) and some of the Products carry NSF ( National Sanitary Foundation Certificates ). We are an OEM supplier to many discerning Companies including GE Health Care. A copy of our Product Literature is enclosed along with. For your more information we have our sister concern in the name of QUANTUM POLYMERS CORP. , USA . having manufacturing unit at Newark , De , USA, who are manufacturers of various High Performance Polymers including PVDF in the form of Rods , Tubes & Plates. We proudly say that we are the only company in the world who can extrude rods of CARBON FIBER FILLED PEEK & GLASS FIBRE FILLED PEEK OF 8 DIA. We will be happy to hear from you regarding your requirements. Thanks & Regards Sunil Hanchate Engineered Polymers (India) Pvt. Ltd.Mumbai , India

We offer M.C. NYLON GEAR.For your information we are a Company manufacturing Stock Shapes - Rods, Plates, Tubes and Machined Parts of Engineering Plastics like Polyamide ( Nylon) POM (Delrin), and High Performance Plastics like PET, PBT, Polycarbonate, Polysulfones, PVDF, Ultem , PEEK etc. Our manufacturing facility is located at Bangalore India where we utilize, Extrusion, Reactive Processing and Compression Moulding to produce the Stock Shapes. We produce Finished Machined Parts using Conventional and CNC Machines under the same roof from our only Plastics machining facility. This avoids any contamination with metals - of great importance to Health Care Equipment and Electrical Equipment Industries. We are certified under ISO 9001-2008 Quality System. We are also certified by UL ( Under Writers Laboratory ) and some of the Products carry NSF ( National Sanitary Foundation Certificates ). We are an OEM supplier to many discerning Companies including GE Health Care. A copy of our Product Literature is enclosed along with. For your more information we have our sister concern in the name of QUANTUM POLYMERS CORP. , USA . Having manufacturing unit at Newark , De , USA, who are manufacturers of various High Performance Polymers including PVDF in the form of Rods , Tubes & Plates. We proudly say that we are the only company in the world who can extrude rods of CARBON FIBER FILLED PEEK & GLASS FIBRE FILLED PEEK OF 8 DIA. We will be happy to hear from you regarding your requirements. Thanks & Regards Sunil Hanchate

For your information we are a company manufacturing stock shapes - rods, plates, tubes and machined parts of engineering plastics like polyamide ( nylon) pom (delrin), and high performance plastics like pet, pbt, polycarbonate, polysulfones, pvdf, ultem , peek etc. Our manufacturing facility is located at bangalore india where we utilize, extrusion, reactive processing and compression moulding to produce the stock shapes. We produce finished machined parts using conventional and cnc machines under the same roof from our only plastics machining facility. This avoids any contamination with metals - of great importance to health care equipment and electrical equipment industries. we are certified under iso 9001-2008 quality system. We are also certified by ul ( under writers laboratory ) and some of the products carry nsf ( national sanitary foundation certificates ). we are an oem supplier to many discerning companies including ge health care. A copy of our product literature is enclosed along with. for your more information we have our sister concern in the name of quantum polymers corp. , usa . Having manufacturing unit at newark , de , usa, who are manufacturers of various high performance polymers including pvdf in the form of rods , tubes & plates. We proudly say that we are the only company in the world who can extrude rods of carbon fiber filled peek & glass fibre filled peek of 8 dia. we will be happy to hear from you regarding your requirements.

We are renowned Manufacturer and Supplier of Polyvinylidene Fluoride(PVDF) from India. Our Polyvinylidene Fluoride(PVDF) adheres to the standard properties of Polyvinylidene Fluoride(PVDF) i.e. it is non-reactive to most of the solvents, acids, alcohols, etc. The Polyvinylidene Fluoride(PVDF) is a pure thermoplastic polymer and is hence used in industries, which require high amount purity, tensile strength and resistance to solvents. Fields in which it is used are robotics, biotechnology, aerospace and many more.

Key Features :

• Chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, alcohols, etc.
• Very high purity
• Abrasion resistance comparable to that of polyamides
• Low coefficient of friction
• Continuous use within a wide range of temperatures
• Unaffected by UV and good resistance to radiation
• Excellent intrinsic fire resistance
• Physiological harmless and approved for contact with food products
• Good capability for thermoforming and very easily joined by welding

Typical Applications ;

• Chemical Processing
• Transport and storage systems
• Oil and Gas
• Aerospace
• Fuel cells
• Semiconductor/Microelectronics
• Sensors
• Biotechnology
• Robotics

We are a renowned Manufacturer and Supplier of Polyphenylene Sulphide. Our Polyphenylene Sulphide is suitable for making electronic and electrical components, valves, gears, rotors, rings, chemical pumps and motor parts. The Polyphenylene Sulphide is suitable for all above purposes due to its properties such as excellent thermal stability, high strength, and resistance to acids, alkalis, ketones and hydrocarbons. We provide the Polyphenylene Sulphide in excellent packaging.

Key Features :

• Excellent strength and rigidity up to 425^oF
• continuous use with minimum decline in mechanical properties
• Outstanding anti-fatigue and anti-creep properties
• Superior chemical resistance
• Excellent resistance to radiation and inert to steam
• Virtually no moisture absorption
• Low coefficient of thermal expansion, high dimensional stability
• Outstanding electrical properties at high frequency, high temp and high humidity
• Inherently flame retardant (UL 94 V-0 rating)

Typical Applications :

• Electrical/Electronic components
• Manifolds
• Chemical pump and motor parts
• Gears, rotors and rings
• Valves
• Compressor components
• Sensor components
• Wear plates
• High pressure liquid chromatography
• components

WE OFFER VARIOUS GRADES OF POM PLATES . WE ARE THE ONLY INDIAN COMPANY WHO CAN EXTRUDE POM PLATES OF VARIOUS THICKNESS IN THE SIZE OF 1250 MM WIDE X 2500 MM LENGTH . WE ALSO OFFER MACHINED PARTS OF POM.

We have full fledge cnc machined shop . We offer cast nylon machined parts machined at our plastic only the machining facility . regards engineered polymers ( india ) pvt ltd.