Product / Services
Post Buy Requirement
ES

ENERMAX SYSTEMS
Ambad, Nashik, Maharashtra

Add Review
Call Now Call Now

Our Products

  1. Battery Chargers 3 Products available
  2. Solar Lightings 3 Products available

  3. Inverters

    2 Products available

  4. Lanterns

    1 Products available

  5. Manpower Service

    1 Products available

  6. UPS

    1 Products available

  7. Inverters, UPS & Converters

    1 Products available

  8. Adapter

    1 Products available

  9. Electric Circuit Components & Parts

    1 Products available

  10. Solar Water Heater

    1 Products available
  11. Others Products 2 Products available

Battery Chargers

Leading Manufacturer, Supplier & Retailer of Battery Charger, Yo Bike Battery Charger and SPRAY PUMP BATTERY CHARGER.

battery charger

Battery Charger

These Battery Charger are specially designed for Diesel Generators / Engine Start applications taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique.

Various available ranges are as follows
  • 12 Volts, 6 Amps: Suitable for Single Battery upto 100 Ah capacity
  • 12 Volts, 10 Amps: Suitable for Single Battery above 100 Ah upto 200 Ah capacity
  • 24 Volts, 10 Amps: Suitable for Two Batteries in Series upto 100 Ah each Battery capacity

Technical Specifications 24V, 10A 12V, 10A 12V, 6A
Electrical Characteristics
Input Voltage 170 – 300V AC 170 – 300V AC 150 – 300V AC
Output Voltage-Boost mode 27.4 – 28V DC 14V DC 14V DC
Output Voltage-Float mode 26.2 V DC 13.4V DC 13.4V DC
Charging Current-Boost mode 10A 10A 6A
Charging Current-Float mode 0 – 4A 0 – 4A 0 – 2.5A
Leakage Current @ 230 V ac < 2mA < 2mA < 2mA
Line regulation < 1% < 1% < 1%
Load regulation < 1% < 1% < 1%
Ripple content 150mV p-p 150mV p-p 150mV p-p
Dielectric strength
Between Input & Output 2 kV AC 2 kV AC 2 kV AC
Between Input & Earth 1.5kV AC 1.5kV AC 1.5kV AC
Between Output & Earth 1.5kV AC 1.5kV AC 1.5kV AC
Protections
In rush current Limited by NTC Thermistor
Over voltage at Input Shut down above 300V AC
Under voltage at Input Cutoff at 140V AC. Cut in at 160V AC
Over voltage at Output 29.5V 15.5V 15.5V
Short circuit at Output Protected Protected Protected
Overload at Output Protected Protected Protected
Reverse polarity of Battery Protected Protected Protected
Over voltage due to external source Protected Protected Protected
Other Features
Indications Mains ON, Boost mode, Float mode, Battery Reverse
Annunciation Potential free NO/NC contact for Charger ON/FAIL
Mechanical
Type of mounting Wall mounting Type
Dimensions WxDxH 195x128x95 185x125x65 175x115x60
Short circuit at Output Protected Protected Protected
Weight (Approx.) 1500g 1200g 1000g
Environmental
Operating Temperature 0 – 50 Deg.C
Operating Relative Humidity 0 – 80% Max.
Vibrations 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes

 

View Complete Details
Ask Latest Price & Details
Yo Bike Battery Charger

Yo Bike Battery Charger

These battery chargers are specially designed for Yo-Bike / E-Bike taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique.

With deep understanding of market trend, we have come out with Yo Bike Battery Charger. These battery chargers are designed by our vendors utilizing contemporary machinery and are accessible in varied specifications too.

Available ranges are as follows

48 Volts, 2.5 Amps - Other Non-standard ranges also can be made available against specific request.

View Complete Details
Ask Latest Price & Details
SPRAY PUMP BATTERY CHARGER

SPRAY PUMP BATTERY CHARGER

These battery chargers are specially designed for Spray Pump Battery Charger applications taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique.

Various available ranges are as follows
  • 12 Volts, 0.7 Amps: Suitable for Single Battery up to 7.5 Ah capacity.
  • 12 Volts, 1.7 Amps: Suitable for Single Battery up to 26 Ah capacity.
  • Other Non-standard ranges like 24 Volts, (Suitable for Two Batteries in Series also can be made available against specific request.

Technical Specifications 12V, 0.7A 12V, 1.7A
Electrical Characteristics
Input Voltage 150 – 270V AC 150 – 270V AC
Output Voltage-Boost mode 14.4V DC 14.4V DC
Output Voltage-Float mode 13.8V DC 13.8V DC
Charging Current-Boost mode 0.7A 1.7A
Leakage Current @ 230 V ac < 2mA < 2mA
Line regulation < 1% < 1%
Load regulation < 1% < 1%
Ripple content 150mV p-p 150mV p-p
Dielectric strength
Between Input & Output 2 kV AC 2 kV AC
Between Input & Earth 1.5kV AC 1.5kV AC
Between Output & Earth 1.5kV AC 1.5kV AC
Protections
In rush current Limited by NTC Thermistor
Under voltage at Input Cutoff at 140V AC. Cut in at 160V AC
Over voltage at Input Shut down above 300V AC
Over voltage at Output 15.5V 15.5V
Short circuit at Output Protected Protected
Overload at Output Protected Protected
Reverse polarity of Battery Protected Protected
Other Features
Indications Boost/Float mode –Dual Colour LED
Mechanical
Type of mounting Table Top Mounting Type
Dimensions LxWxH 122x54x36 122x54x36
Environmental
Operating Temperature 0 – 50 Deg.C
Operating Relative Humidity 0 – 80% Max.
Vibrations 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.
Retailer of Battery Chargers from Nashik, Maharashtra by ENERMAX SYSTEMS
Product / Services
Post Buy Requirement
ES

ENERMAX SYSTEMS
Ambad, Nashik, Maharashtra

Add Review
Call Now Call Now

Our Products

  1. Solar Lightings 3 Products available
  2. Battery Chargers 3 Products available

  3. Inverters

    2 Products available

  4. Electric Circuit Components & Parts

    1 Products available

  5. Solar Water Heater

    1 Products available

  6. Solar And Renewable Energy Products

    1 Products available

  7. Solar Power Plants

    1 Products available

  8. Lanterns

    1 Products available

  9. Manpower Service

    1 Products available

  10. UPS

    1 Products available
  11. Others Products 2 Products available

Battery Chargers

We offer a complete product range of Battery Charger, Yo Bike Battery Charger and SPRAY PUMP BATTERY CHARGER

battery charger

Battery Charger

These Battery Charger are specially designed for Diesel Generators / Engine Start applications taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique.

Various available ranges are as follows
  • 12 Volts, 6 Amps: Suitable for Single Battery upto 100 Ah capacity
  • 12 Volts, 10 Amps: Suitable for Single Battery above 100 Ah upto 200 Ah capacity
  • 24 Volts, 10 Amps: Suitable for Two Batteries in Series upto 100 Ah each Battery capacity

Technical Specifications 24V, 10A 12V, 10A 12V, 6A
Electrical Characteristics
Input Voltage 170 – 300V AC 170 – 300V AC 150 – 300V AC
Output Voltage-Boost mode 27.4 – 28V DC 14V DC 14V DC
Output Voltage-Float mode 26.2 V DC 13.4V DC 13.4V DC
Charging Current-Boost mode 10A 10A 6A
Charging Current-Float mode 0 – 4A 0 – 4A 0 – 2.5A
Leakage Current @ 230 V ac < 2mA < 2mA < 2mA
Line regulation < 1% < 1% < 1%
Load regulation < 1% < 1% < 1%
Ripple content 150mV p-p 150mV p-p 150mV p-p
Dielectric strength
Between Input & Output 2 kV AC 2 kV AC 2 kV AC
Between Input & Earth 1.5kV AC 1.5kV AC 1.5kV AC
Between Output & Earth 1.5kV AC 1.5kV AC 1.5kV AC
Protections
In rush current Limited by NTC Thermistor
Over voltage at Input Shut down above 300V AC
Under voltage at Input Cutoff at 140V AC. Cut in at 160V AC
Over voltage at Output 29.5V 15.5V 15.5V
Short circuit at Output Protected Protected Protected
Overload at Output Protected Protected Protected
Reverse polarity of Battery Protected Protected Protected
Over voltage due to external source Protected Protected Protected
Other Features
Indications Mains ON, Boost mode, Float mode, Battery Reverse
Annunciation Potential free NO/NC contact for Charger ON/FAIL
Mechanical
Type of mounting Wall mounting Type
Dimensions WxDxH 195x128x95 185x125x65 175x115x60
Short circuit at Output Protected Protected Protected
Weight (Approx.) 1500g 1200g 1000g
Environmental
Operating Temperature 0 – 50 Deg.C
Operating Relative Humidity 0 – 80% Max.
Vibrations 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes

 

View Complete Details
Ask Latest Price & Details
Yo Bike Battery Charger

Yo Bike Battery Charger

These battery chargers are specially designed for Yo-Bike / E-Bike taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique.

With deep understanding of market trend, we have come out with Yo Bike Battery Charger. These battery chargers are designed by our vendors utilizing contemporary machinery and are accessible in varied specifications too.

Available ranges are as follows

48 Volts, 2.5 Amps - Other Non-standard ranges also can be made available against specific request.

View Complete Details
Ask Latest Price & Details
SPRAY PUMP BATTERY CHARGER

SPRAY PUMP BATTERY CHARGER

These battery chargers are specially designed for Spray Pump Battery Charger applications taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique.

Various available ranges are as follows
  • 12 Volts, 0.7 Amps: Suitable for Single Battery up to 7.5 Ah capacity.
  • 12 Volts, 1.7 Amps: Suitable for Single Battery up to 26 Ah capacity.
  • Other Non-standard ranges like 24 Volts, (Suitable for Two Batteries in Series also can be made available against specific request.

Technical Specifications 12V, 0.7A 12V, 1.7A
Electrical Characteristics
Input Voltage 150 – 270V AC 150 – 270V AC
Output Voltage-Boost mode 14.4V DC 14.4V DC
Output Voltage-Float mode 13.8V DC 13.8V DC
Charging Current-Boost mode 0.7A 1.7A
Leakage Current @ 230 V ac < 2mA < 2mA
Line regulation < 1% < 1%
Load regulation < 1% < 1%
Ripple content 150mV p-p 150mV p-p
Dielectric strength
Between Input & Output 2 kV AC 2 kV AC
Between Input & Earth 1.5kV AC 1.5kV AC
Between Output & Earth 1.5kV AC 1.5kV AC
Protections
In rush current Limited by NTC Thermistor
Under voltage at Input Cutoff at 140V AC. Cut in at 160V AC
Over voltage at Input Shut down above 300V AC
Over voltage at Output 15.5V 15.5V
Short circuit at Output Protected Protected
Overload at Output Protected Protected
Reverse polarity of Battery Protected Protected
Other Features
Indications Boost/Float mode –Dual Colour LED
Mechanical
Type of mounting Table Top Mounting Type
Dimensions LxWxH 122x54x36 122x54x36
Environmental
Operating Temperature 0 – 50 Deg.C
Operating Relative Humidity 0 – 80% Max.
Vibrations 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.