AMM-160 is a Portable Moisture & Temperature in oil meter or a sensor that provides an excellent reliable, economical and Time saving solution for measurement of moisture in Oil in the field.

It measures Moisture-in-oil in terms of the Water Activity (aw) and Temperature. The same gets converted into PPM units as in Transformer applications, PPM-unit is traditionally used.

The MOISTURE SENSOR is of solid Polymer structure and is, Fast, Accurate and Reliable Water in Oil and Temperature Transducers designed for Industrial, Transformers and Locomotive applications where a reliable and accurate measurement of water in oil content is highly required. Its fast response time combined with Reliable and Rugged structure make it even suitable for fixed in situ mounting in fluids under Pressure

Dissolved water in oil is a critical data for Oil System Management as water consumes oil additives that can result in severe mechanical damages due to degradation of Lubricant Properties.

In a comprehensive Transformer Maintenance Program, determination of the Moisture content and Temperature of the oils is an essential part. Excessive moisture contents causes accelerated ageing of the Insulation Materials and reduce their Dielectric strength. In extreme cases this can result in Arcing and Short Circuits within the windings. Accurate moisture analysis can also warn about Leaks in the Oil System as water is absorbed from the surrounding air.

Air or Gas samples up to 12kg/cm pressure and temperature up to 75C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure.

AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings.

Endee Model AMM-60 Dew Point Meter, a portable instrument is designed to measure the performance of compressed air and process drying systems. It is ideal for Moisture monitoring in commercial and industrial applications.

Periodic monitoring of industrial Air systems results in a reduced maintenance cost & down time caused by condensate, the leading cause of corrosion in pneumatic systems.

DPXT - 98 Series are field transmitter designed for rugged industrial environment. They employ advanced digital technology to provide reliable and highly accurate measurement.
The well proven capacitive sensor offers exceptional resistance to contaminants like organic vapours.
Its linearised 4-20mA DC can interface directly with any receiving instrument.

• Micro Controller Based.
• Can be calibrated for Dew Point, Moisture,
• Vapour Pressure, Humidity.
• Available in both explosion proof (certified by CMRI) or weather proof housing (EN60529).
• 4-20mA DC, output as standard.
• Rs232 / 485 Output Optional.
• Single Point Calibration
• Alphanumeric LCD Display

Air or Gas samples up to 12kgcm pressure and temperature up to 75C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure. AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings.

Air or Gas samples up to 12kg/cm pressure and temperature up to 75C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure.

AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings.

Endee Model AMM-60 Dew Point Meter, a portable instrument is designed to measure the performance of compressed air and process drying systems. It is ideal for Moisture monitoring in commercial and industrial applications.

Periodic monitoring of industrial Air systems results in a reduced maintenance cost & down time caused by condensate, the leading cause of corrosion in pneumatic systems.

phs-8b intelligent industrial ph transmitter is the intelligent industrial online analytical instrument. it can be connected to the high-impedance analog signal ph orp electrode of many companies at home and abroad. it can be used to detect the ph, orp value of the solution in chemical, petroleum, rubber, paper, tobacco, alcohol, sugar, food, mining, smelting, iron and steel, power generation, pharmaceuticals, water treatment and other industries.

broken bag detectors finds applications in a wide variety of industries where detection and control of dust levels is critical for the safety, maintenance, equipment operation, plant efficiency andor the environment. It provides reliable and economical detection of leaks and filter failures in powder and bulk solids industries broken bag detectors has led visual indications and a relay output to maximize its user-friendliness and automation capabilities. It incorporates a specially designed adjustable damping system that increases its response time and prevents false alarms. For process flow application it is a reliable flow no flow detector to monitor flow disruptions of dry solids in bulk handling & pneumatic conveying applications

AMM-160 is a Portable Moisture & Temperature in oil meter or a sensor that provides an excellent reliable, economical and Time saving solution for measurement of moisture in Oil in the field.

It measures Moisture-in-oil in terms of the Water Activity (aw) and Temperature. The same gets converted into PPM units as in Transformer applications, PPM-unit is traditionally used.

The MOISTURE SENSOR is of solid Polymer structure and is, Fast, Accurate and Reliable Water in Oil and Temperature Transducers designed for Industrial, Transformers and Locomotive applications where a reliable and accurate measurement of water in oil content is highly required. Its fast response time combined with Reliable and Rugged structure make it even suitable for fixed in situ mounting in fluids under Pressure

Dissolved water in oil is a critical data for Oil System Management as water consumes oil additives that can result in severe mechanical damages due to degradation of Lubricant Properties.

In a comprehensive Transformer Maintenance Program, determination of the Moisture content and Temperature of the oils is an essential part. Excessive moisture contents causes accelerated ageing of the Insulation Materials and reduce their Dielectric strength. In extreme cases this can result in Arcing and Short Circuits within the windings. Accurate moisture analysis can also warn about Leaks in the Oil System as water is absorbed from the surrounding air.

Air or Gas samples up to 12kg/cm pressure and temperature up to 75C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure.

AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings.

Endee Model AMM-60 Dew Point Meter, a portable instrument is designed to measure the performance of compressed air and process drying systems. It is ideal for Moisture monitoring in commercial and industrial applications.

Periodic monitoring of industrial Air systems results in a reduced maintenance cost & down time caused by condensate, the leading cause of corrosion in pneumatic systems.

DPXT - 98 Series are field transmitter designed for rugged industrial environment. They employ advanced digital technology to provide reliable and highly accurate measurement.
The well proven capacitive sensor offers exceptional resistance to contaminants like organic vapours.
Its linearised 4-20mA DC can interface directly with any receiving instrument.

• Micro Controller Based.
• Can be calibrated for Dew Point, Moisture,
• Vapour Pressure, Humidity.
• Available in both explosion proof (certified by CMRI) or weather proof housing (EN60529).
• 4-20mA DC, output as standard.
• Rs232 / 485 Output Optional.
• Single Point Calibration
• Alphanumeric LCD Display

Air or Gas samples up to 12kgcm pressure and temperature up to 75C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure. AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings.

Air or Gas samples up to 12kg/cm pressure and temperature up to 75C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure.

AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings.

Endee Model AMM-60 Dew Point Meter, a portable instrument is designed to measure the performance of compressed air and process drying systems. It is ideal for Moisture monitoring in commercial and industrial applications.

Periodic monitoring of industrial Air systems results in a reduced maintenance cost & down time caused by condensate, the leading cause of corrosion in pneumatic systems.

phs-8b intelligent industrial ph transmitter is the intelligent industrial online analytical instrument. it can be connected to the high-impedance analog signal ph orp electrode of many companies at home and abroad. it can be used to detect the ph, orp value of the solution in chemical, petroleum, rubber, paper, tobacco, alcohol, sugar, food, mining, smelting, iron and steel, power generation, pharmaceuticals, water treatment and other industries.

broken bag detectors finds applications in a wide variety of industries where detection and control of dust levels is critical for the safety, maintenance, equipment operation, plant efficiency andor the environment. It provides reliable and economical detection of leaks and filter failures in powder and bulk solids industries broken bag detectors has led visual indications and a relay output to maximize its user-friendliness and automation capabilities. It incorporates a specially designed adjustable damping system that increases its response time and prevents false alarms. For process flow application it is a reliable flow no flow detector to monitor flow disruptions of dry solids in bulk handling & pneumatic conveying applications