Our Products
Designed to make the task of trace oxygen analysis easier, faster and more precise than ever before
Indication | 16x2 Alpha numeric Digital LCD Continuous |
---|---|
Principle of Analysis | Fast Recovery Self Powered Diffusion Limited sealed Electrochemical Sensor |
Ranges | 0 - 10, 0 - 100, 0 - 1000 ppm |
Accuracy | ±2% of full scale (±1ppm for 0 - 10ppm range) at a constant temperature |
Diagnostics | Comprehensive self testing function |
Digital Interface | RS-232C |
Response Time | 90% in 5 to 10 seconds 90% in 60 seconds (0 - 10 ppm range) |
Reproducibility | ±1% at a constant temperature |
Sensitivity | 0.5% of FS |
Alarm Setting | Hi & Very High Adjustable over full range |
Wetted Parts | 316 Stainless Steel / Teflon |
Relative Humidity | 0 - 99% RH Non-condensing |
Housing | Drawn Aluminium |
Recommended Sample | 0.1 to 5 Litre / Min |
0 Operating Temperature | 0 to 50 C |
Power | 110 or 220 V (user specified), 50/60 Hz |
Analog Output | 4 - 20 mA isolated output 600 ohms |
Sample inlet / outlet | 1/4” OD Flare fittings |
Mounting | Panel |
Mounting Dimension | 390 x 132 x 230 mm |
Custom Engineering is Endee's main strength Endee maintains in-house capability to both design and manufacture a wide variety of sample systems tailored to meet out customers' process requirements. We design sample-conditioning systems for our complete line of process analyzers .
The trace oxygen analyser can be ordered as a standard unit or as part of a larger cost effective integerated analytical system. The analyser can also be supplied designed as a split architecture instrument, meaning that a general purpose, panel mounted Control Unit for non-hazardous areas controls a remote Analysis Unit(Transmitter) that can operate in hazardous areas.
Designed to make the task of trace oxygen analysis easier, faster and more precise than ever before
Indication | 16x2 Alpha numeric Digital LCD Continuous |
---|---|
Principle of Analysis | Fast Recovery Self Powered Diffusion Limited sealed Electrochemical Sensor |
Ranges | 0 - 10, 0 - 100, 0 - 1000 ppm |
Accuracy | ±2% of full scale (±1ppm for 0 - 10ppm range) at a constant temperature |
Diagnostics | Comprehensive self testing function |
Digital Interface | RS-232C |
Response Time | 90% in 5 to 10 seconds 90% in 60 seconds (0 - 10 ppm range) |
Reproducibility | ±1% at a constant temperature |
Sensitivity | 0.5% of FS |
Alarm Setting | Hi & Very High Adjustable over full range |
Wetted Parts | 316 Stainless Steel / Teflon |
Relative Humidity | 0 - 99% RH Non-condensing |
Housing | Drawn Aluminium |
Recommended Sample | 0.1 to 5 Litre / Min |
0 Operating Temperature | 0 to 50 C |
Power | 110 or 220 V (user specified), 50/60 Hz |
Analog Output | 4 - 20 mA isolated output 600 ohms |
Sample inlet / outlet | 1/4” OD Flare fittings |
Mounting | Panel |
Mounting Dimension | 390 x 132 x 230 mm |
This fully microprocessor controlled precision moisture analyser is a high technology solid state unit designed to operate in rough field service is available as a portable, field mounting rack / panel mounting versions. The high quality LC-display shows th moisture in ppm.
The sensor contains a highly hygroscopic solid electrolyte that absorbs moisture present in the sample and creates an electrolysis current directly proportional to the moisture content.
A knowledge of the gas flow rate and the current in the cell gives an absolute measure of the moisture contained in the sample gas. The sensor is suitable for all corrosive & other gases and materials in contact with the sample are glass / teflon, platinum or rhodium, and the selected material of the sensor holder.
The special transfer of the sample-gas through the sensor, combined with a high quality surface provides fast response and minimizes the tailing effect. This benefit is especially important when monitoring low ppm-concentration. Sensor is a regeneratable and can be expedileously done at site.
Measurement Range | 0-10, 100, 1000, 2000 PPM or Dew Point -90 deg.C to 0 deg.C |
---|---|
Sensitivity | 0.1 PPM |
Accuracy. | +/-2 % of Reading or 0.4 PPMv |
Accuracy | +/-2 % of Reading or 0.4 PPMv |
Response Time | 90% within 60 sec. |
Display type | Alphanumeric LCD/LED optional |
Sample Connections | 1/8in. Tube |
Sample Pressure | 0.25 to 10 Bar |
Sample Flow | 100cc/min-controlled |
Sample & Ambient Temp. | 0-50 deg.C |
Sensor Body. | 196 X 100 X 40 mm ABS ENCLOSURE |
WEIGHT | 1/2 KG |
ADDITIONAL FEATURES (OPTIONAL) | |
Computer Interface | RS-232 link for Data in ASCII Delimited Format, 2400 Baud 8 Bits, 1 Stop, 1 Start, No Parity. |
Data Logger | 32 Kbyte, Non-Volatile Memory |
ACCESSORIES | Charger working on 230V AC 50 Hz, Instruction manual, calibration test certificate, Leather carrying case, 5LPM flow meter, 2 mtr teflon tubing |
The sensor contains a highly hygroscopic solid electrolyte that absorbs moisture present in the sample and creates an electrolysis current directly proportional to the moisture content.
A knowledge of the gas flow rate and the current in the cell gives an absolute measure of the moisture contained in the sample gas. The sensor is suitable for all corrosive & other gases and materials in contact with the sample are glass / teflon, platinum or rhodium, and the selected material of the sensor holder.
The special transfer of the sample-gas through the sensor, combined with a high quality surface provides fast response and minimizes the tailing effect. This benefit is especially important when monitoring low ppm-concentration. Sensor is a regeneratable and can be expedileously done at site.
This fully microprocessor controlled precision moisture analyser is a high technology solid state unit designed to operate in rough field service is available as a portable, field mounting rack / panel mounting versions. The high quality LC-display shows th moisture in ppm.
Measurement Range | 0-10, 100, 1000, 2000 PPM or Dew Point -90 deg.C to 0 deg.C |
---|---|
Sensitivity | 0.1 PPM |
Accuracy. | +/-2 % of Reading or 0.4 PPMv |
Accuracy | +/-2 % of Reading or 0.4 PPMv |
Response Time | 90% within 60 sec. |
Display type | Alphanumeric LCD/LED optional |
Sample Connections | 1/8in. Tube |
Sample Pressure | 0.25 to 10 Bar |
Sample Flow | 100cc/min-controlled |
Sample & Ambient Temp. | 0-50 deg.C |
Sensor Body. | 196 X 100 X 40 mm ABS ENCLOSURE |
WEIGHT | 1/2 KG |
ADDITIONAL FEATURES (OPTIONAL) | |
Computer Interface | RS-232 link for Data in ASCII Delimited Format, 2400 Baud 8 Bits, 1 Stop, 1 Start, No Parity. |
Data Logger | 32 Kbyte, Non-Volatile Memory |
ACCESSORIES | Charger working on 230V AC 50 Hz, Instruction manual, calibration test certificate, Leather carrying case, 5LPM flow meter, 2 mtr teflon tubing |