• Sturdy stainless steel sampling probe with extension tubing for ease of measurement.
• Thermocouple in the tip of probe measures temperature at point of sampling to minimise error.
• Time tested high suction inbuilt sampling pump acts against draft. Supervisory circuit continuously monitors it against failure.
• Inline Filter to Inbuilt Moisture & Dust, Disposable easy to replace filter element. Supervisory Diagnostic circuit continuously checks it against choking.
• Retains the readings till the next sampling.
• Compact Aluminum Housing
• Rechargeable Ni-cad battery pack with charger.
• Maintenance & Spare Parts : Designed for free maintenance operation. Long Life Sensor.
• Combustion efficiency is determined by Oxygen content and temperature of Fuel gases. An excess air (Oxygen) condition reduces the efficiency as it carries away the heat while a deficient air (Oxygen) produces an incomplete i combustion with consequent higher costs and increased polluting emissions.

• Long life zirconium sensor
• Very fast response, no purgetime
• No reference gas required
• High accuracy
• Wide measurement range 1 ppm to 96%
• Simpletooperate
• Maintenance free
• automatic & begins with every start up with fresh air aspirated instead of Gas sample.
• Automatic self check for efficiency calculation :With aspirated fresh air specific percentage efficiency of the selertpd Fuel is displayed as a cherk nn its calculations.
• Self Supervisory Diagnosis : Continuously checks the status of: 1) Battery Voltage 2) Sample Flow 3) Oxygen Sensor

• Custom designed sample conditioning system
• Application specific principle of Analysis
• Infrared & Electrochemical detector for CO and
• C02 & NOx, HC.
• Electrochemical/paramagnetic or zirconia detector for 0
• Hydrocarbons & Hydrogen
• Heated stack mounted filter optional
• Automatic calibration
• Built in printer. (Optional)
• Multipoint sampling system. (Optional)
• RS-232/485 output for data. logging and further analysis.(Optional)

The Model CA 4000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications Changing The Measuring Parameters.

It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific of Gases to Be Measured. Needs of Customer in Selection Optionally Lndee Ca 2000 Is Available With Highly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault",

The Model CA 4000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications Changing The Measuring Parameters.

It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific of Gases to Be Measured. Needs of Customer in Selection Optionally Lndee Ca 2000 Is Available With Highly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault",

• Custom designed sample conditioning system
• Application specific principle of Analysis
• Infrared & Electrochemical detector for CO and
• C02 & NOx, HC.
• Electrochemical/paramagnetic or zirconia detector for 0
• Hydrocarbons & Hydrogen
• Heated stack mounted filter optional
• Automatic calibration
• Built in printer. (Optional)
• Multipoint sampling system. (Optional)
• RS-232/485 output for data. logging and further analysis.(Optional)

• Sturdy stainless steel sampling probe with extension tubing for ease of measurement.
• Thermocouple in the tip of probe measures temperature at point of sampling to minimise error.
• Time tested high suction inbuilt sampling pump acts against draft. Supervisory circuit continuously monitors it against failure.
• Inline Filter to Inbuilt Moisture & Dust, Disposable easy to replace filter element. Supervisory Diagnostic circuit continuously checks it against choking.
• Retains the readings till the next sampling.
• Compact Aluminum Housing
• Rechargeable Ni-cad battery pack with charger.
• Maintenance & Spare Parts : Designed for free maintenance operation. Long Life Sensor.
• Combustion efficiency is determined by Oxygen content and temperature of Fuel gases. An excess air (Oxygen) condition reduces the efficiency as it carries away the heat while a deficient air (Oxygen) produces an incomplete i combustion with consequent higher costs and increased polluting emissions.

• Long life zirconium sensor
• Very fast response, no purgetime
• No reference gas required
• High accuracy
• Wide measurement range 1 ppm to 96%
• Simpletooperate
• Maintenance free
• automatic & begins with every start up with fresh air aspirated instead of Gas sample.
• Automatic self check for efficiency calculation :With aspirated fresh air specific percentage efficiency of the selertpd Fuel is displayed as a cherk nn its calculations.
• Self Supervisory Diagnosis : Continuously checks the status of: 1) Battery Voltage 2) Sample Flow 3) Oxygen Sensor

• Custom designed sample conditioning system
• Application specific principle of Analysis
• Infrared & Electrochemical detector for CO and
• C02 & NOx, HC.
• Electrochemical/paramagnetic or zirconia detector for 0
• Hydrocarbons & Hydrogen
• Heated stack mounted filter optional
• Automatic calibration
• Built in printer. (Optional)
• Multipoint sampling system. (Optional)
• RS-232/485 output for data. logging and further analysis.(Optional)

The Model CA 4000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications Changing The Measuring Parameters.

It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific of Gases to Be Measured. Needs of Customer in Selection Optionally Lndee Ca 2000 Is Available With Highly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault",

The Model CA 4000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications Changing The Measuring Parameters.

It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific of Gases to Be Measured. Needs of Customer in Selection Optionally Lndee Ca 2000 Is Available With Highly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault",

• Custom designed sample conditioning system
• Application specific principle of Analysis
• Infrared & Electrochemical detector for CO and
• C02 & NOx, HC.
• Electrochemical/paramagnetic or zirconia detector for 0
• Hydrocarbons & Hydrogen
• Heated stack mounted filter optional
• Automatic calibration
• Built in printer. (Optional)
• Multipoint sampling system. (Optional)
• RS-232/485 output for data. logging and further analysis.(Optional)