Balancing machine to balance tool holders on 1 plane

The Tool Dynamic TD Economic is your start into the modular balancing system of the Tool Dynamic series. The TD Economic measures and compensates the unbalance in one plane (static). Therefore it is perfect for balancing short tool holders and tools because of the couple unbalance being very low. The device is operated via the integrated keyboard and screen.

Technical data subject to change without prior notice.HAIMER balancing adapter with automatic clamping

• m precise clamping for highest measuring accuracy and repeatability
• Easy and quickest changing due to compact design. A re-calibration of the machine is not necessary

Equipment

• Base made of polymer concrete Highest measuring accuracy due to heavy base
• User interface Integrated user interface for easy handling of the machine
• Optical indexing help Indication of the exact spindle angle position on display
• Laser marking Indicates the position of unbalance and correction with a laser
• Print label Print balancing result on label
• Drilling radial Balancing by drilling radially
• Software for compensation with balancing rings Balancing by rings or other movable weights
• Index balancing Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180 Degree)
• Balancing with spindle compensation Quick and precise measuring of repetition parts (single measuring run)
• Balancing in 1 plane Measuring and compensation of unbalance in 1 plane (static)
• Fixed components Enables balancing at predefined positions, e. g. with balancing screws
• Automatic indexing Turn the spindle on the selected angle position and simplifies exact positioning of spindle
• Rack for accessories Storage rack with two integrated drawers for balancing adapters and further accessories
• Balancing software TDC 4.0New software with user-friendly graphical interface and touchscreen-control
• Deutsch/English/Francais/Italiano/Espanol Languages for user interface for internal display
• Set of balancing screws Set consisting of 11 x 10 special screws for fine balancing of tool holders with balancing threads M6

HNGX 06 and HNGX 09 Inserts:-45 face milling cutter with indexable inserts HNGX 06 and HNGX 09. Features: Designed to generate improved surface finishInserts with 12 cutting edgesDifferential tooth pitchInternal coolant supplyNeutral design for left and right rotation Unique insert geometry F, M, R for each particular operation (from finishing to roughingWiper inserts also availableAdvantages: High quality surface finishLow cutting forcesWide area of applicationHigh tool accuracyQuiet runningr no Tool Code Description Rate/ApproxHNGX INSERT 1 HNGX 0604ANSN-F:8230 HNGX 0604ANSN-F:8230 9602 HNGX 0604ANSN-F:8215 HNGX 0604ANSN-F:8215 9603 HNGX 0906ANEN-FF:8230 HNGX 0906ANEN-FF:8230 12504 HNGX 0906ANSN-M:M5315 HNGX 0906ANSN-M:M5315 13505 HNGX 0906ANSN-R:8230 HNGX 0906ANSN-R:8230 13006 HNGX 0604ANSN-M:8230 HNGX 0604ANSN-M:8230 960

Indexable Insert With Coating Bk7615:-

• Increase in process reliability
• Reducing the processing time by increasing the average
• Increase in contact time of up to 100% possible

Counter Sinks for High Precision Chucks, manufactured from cobalt based HSS (M42), This suitable for machining stainless steel and temperature resistance alloys M42.

 

Geometry:

The cutting geometry of the countersink has been improved for high productivity countersinking in stainless steel and abrasive high alloyed steels.

Believing in "less is more", Carboloy offers a focused, easy to choose product range of turning inserts capable of covering a large variety of applications in steel, cast iron, stainless steel and aluminium. The offer is designed to fit all manufacturers' needs, but it is particularly suited to customers with small or medium sized batch production. The tools meet the highest quality standards and are manufactured according to ISO specifications.

Shrink Fit Chuck Standard Version JIS B 6339 BT40JIS B 6339 BT40 form ADBForm ADB means Central coolant supply and coolant channels through the flange which can be sealed again.

•     Heat resistant hot-working steel
•     For HSS and solid carbide tools
•     Shank tolerance h6
•     With threaded holes in order to balance with balancing screws
•     Inch sizes Cool Jet bores that can be sealed included
•     Metric sizes Cooling with Cool Jet for an extra charge
•     Cooling with Cool Flash for an extra charge
•     Included in delivery Back-up screw

Standard version, similar to DIN 69882-8

The most important features

•     High runout accuracy (< 3 m)
•     Extreme clamping torque by high pressing in the clamping bore
•     Short chamfer
•     Dynamic form Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
•     Cool Jet (on request)
•     Threaded bores for simple and fast balancing with screws

The assortment of face milling cutters consists of the tools for plain milling (r 45 Degree to 75 Degree). You can find here versions for productive and general milling. The assortment is completed with the offer of milling cutter for heavy rough milling (r 57 Degree and 60 Degree). There are face milling cutters available from 20 mm to 315 mm in the offer according to the type and size of the indexable cutting insert. Shoulder and copy milling cutters (especially high-feed milling cutters) can also be used in this field.

The GFI tools for the LCMF indexable inserts represent a modern solution for shallow grooving into depth corresponding to triple of the width of the indexable cutting insert. The assortment has newly been completed with GFM holders for the LCMR inserts corresponding to quintuple of the width of the indexable cutting insert and GFK tools and GFK holders for the LCMF cutting inserts of 2 mm width enabling parting off and grooving up to 16 mm depth. The tools for the LCMF inserts combine a possibility of grooving and copy (multidirectional) turning.

SC Step Drill produces good quality holes in a wide variety of materials, using either a bench drill or light pedestal drilling machine. Each tool cuts concentric holes in a range of specific sizes. For material up to 1/8" (3mm) thick.

HSCO A777 heavy duty straight shank Jobber drills for machining higher tensile and tougher materials up to x4 diameter Ideal for use in CNC & automated machines where greater heat is generated during drilling 135 Degree split point geometry aids ease of penetration, precise positioning and improves hole size, finish and quality Bronze finish for easy tool identification Manufactured to DIN338 standards.

Included in delivery

• -Metric version Universal 3D-Sensor with clamping shank 20 mm, short probe tip 4 mm
• -Inch version Universal 3D-Sensor with clamping shank 3/4', short probe tip 0.2'

 

Technical data subject to change without prior notice.

Probe tips

The sensors can be equipped with a short (ball 4 mm / 0.2") and a long (ball 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed. The probe tips of course are compatible to all HAIMER 3D-Sensors.

Balancing machine to balance tool holders on 1 plane

The Tool Dynamic TD Economic is your start into the modular balancing system of the Tool Dynamic series. The TD Economic measures and compensates the unbalance in one plane (static). Therefore it is perfect for balancing short tool holders and tools because of the couple unbalance being very low. The device is operated via the integrated keyboard and screen.

Technical data subject to change without prior notice.HAIMER balancing adapter with automatic clamping

• m precise clamping for highest measuring accuracy and repeatability
• Easy and quickest changing due to compact design. A re-calibration of the machine is not necessary

Equipment

• Base made of polymer concrete Highest measuring accuracy due to heavy base
• User interface Integrated user interface for easy handling of the machine
• Optical indexing help Indication of the exact spindle angle position on display
• Laser marking Indicates the position of unbalance and correction with a laser
• Print label Print balancing result on label
• Drilling radial Balancing by drilling radially
• Software for compensation with balancing rings Balancing by rings or other movable weights
• Index balancing Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180 Degree)
• Balancing with spindle compensation Quick and precise measuring of repetition parts (single measuring run)
• Balancing in 1 plane Measuring and compensation of unbalance in 1 plane (static)
• Fixed components Enables balancing at predefined positions, e. g. with balancing screws
• Automatic indexing Turn the spindle on the selected angle position and simplifies exact positioning of spindle
• Rack for accessories Storage rack with two integrated drawers for balancing adapters and further accessories
• Balancing software TDC 4.0New software with user-friendly graphical interface and touchscreen-control
• Deutsch/English/Francais/Italiano/Espanol Languages for user interface for internal display
• Set of balancing screws Set consisting of 11 x 10 special screws for fine balancing of tool holders with balancing threads M6

HNGX 06 and HNGX 09 Inserts:-45 face milling cutter with indexable inserts HNGX 06 and HNGX 09. Features: Designed to generate improved surface finishInserts with 12 cutting edgesDifferential tooth pitchInternal coolant supplyNeutral design for left and right rotation Unique insert geometry F, M, R for each particular operation (from finishing to roughingWiper inserts also availableAdvantages: High quality surface finishLow cutting forcesWide area of applicationHigh tool accuracyQuiet runningr no Tool Code Description Rate/ApproxHNGX INSERT 1 HNGX 0604ANSN-F:8230 HNGX 0604ANSN-F:8230 9602 HNGX 0604ANSN-F:8215 HNGX 0604ANSN-F:8215 9603 HNGX 0906ANEN-FF:8230 HNGX 0906ANEN-FF:8230 12504 HNGX 0906ANSN-M:M5315 HNGX 0906ANSN-M:M5315 13505 HNGX 0906ANSN-R:8230 HNGX 0906ANSN-R:8230 13006 HNGX 0604ANSN-M:8230 HNGX 0604ANSN-M:8230 960

Indexable Insert With Coating Bk7615:-

• Increase in process reliability
• Reducing the processing time by increasing the average
• Increase in contact time of up to 100% possible

Counter Sinks for High Precision Chucks, manufactured from cobalt based HSS (M42), This suitable for machining stainless steel and temperature resistance alloys M42.

 

Geometry:

The cutting geometry of the countersink has been improved for high productivity countersinking in stainless steel and abrasive high alloyed steels.

Believing in "less is more", Carboloy offers a focused, easy to choose product range of turning inserts capable of covering a large variety of applications in steel, cast iron, stainless steel and aluminium. The offer is designed to fit all manufacturers' needs, but it is particularly suited to customers with small or medium sized batch production. The tools meet the highest quality standards and are manufactured according to ISO specifications.

Shrink Fit Chuck Standard Version JIS B 6339 BT40JIS B 6339 BT40 form ADBForm ADB means Central coolant supply and coolant channels through the flange which can be sealed again.

•     Heat resistant hot-working steel
•     For HSS and solid carbide tools
•     Shank tolerance h6
•     With threaded holes in order to balance with balancing screws
•     Inch sizes Cool Jet bores that can be sealed included
•     Metric sizes Cooling with Cool Jet for an extra charge
•     Cooling with Cool Flash for an extra charge
•     Included in delivery Back-up screw

Standard version, similar to DIN 69882-8

The most important features

•     High runout accuracy (< 3 m)
•     Extreme clamping torque by high pressing in the clamping bore
•     Short chamfer
•     Dynamic form Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
•     Cool Jet (on request)
•     Threaded bores for simple and fast balancing with screws

The assortment of face milling cutters consists of the tools for plain milling (r 45 Degree to 75 Degree). You can find here versions for productive and general milling. The assortment is completed with the offer of milling cutter for heavy rough milling (r 57 Degree and 60 Degree). There are face milling cutters available from 20 mm to 315 mm in the offer according to the type and size of the indexable cutting insert. Shoulder and copy milling cutters (especially high-feed milling cutters) can also be used in this field.

The GFI tools for the LCMF indexable inserts represent a modern solution for shallow grooving into depth corresponding to triple of the width of the indexable cutting insert. The assortment has newly been completed with GFM holders for the LCMR inserts corresponding to quintuple of the width of the indexable cutting insert and GFK tools and GFK holders for the LCMF cutting inserts of 2 mm width enabling parting off and grooving up to 16 mm depth. The tools for the LCMF inserts combine a possibility of grooving and copy (multidirectional) turning.

SC Step Drill produces good quality holes in a wide variety of materials, using either a bench drill or light pedestal drilling machine. Each tool cuts concentric holes in a range of specific sizes. For material up to 1/8" (3mm) thick.

HSCO A777 heavy duty straight shank Jobber drills for machining higher tensile and tougher materials up to x4 diameter Ideal for use in CNC & automated machines where greater heat is generated during drilling 135 Degree split point geometry aids ease of penetration, precise positioning and improves hole size, finish and quality Bronze finish for easy tool identification Manufactured to DIN338 standards.

Included in delivery

• -Metric version Universal 3D-Sensor with clamping shank 20 mm, short probe tip 4 mm
• -Inch version Universal 3D-Sensor with clamping shank 3/4', short probe tip 0.2'

 

Technical data subject to change without prior notice.

Probe tips

The sensors can be equipped with a short (ball 4 mm / 0.2") and a long (ball 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed. The probe tips of course are compatible to all HAIMER 3D-Sensors.

Recommended by ExxonMobil for use in

• Heavy-duty manual transmissions, axles, and final drives requiring API GL-5 and MT-1 level performance
• On-highway light and heavy-duty trucks, busses, vans, and cars
• Off-highway industries including construction, mining, quarrying, and agriculture
• Other heavy-duty industrial and automotive applications involving hypoid and other gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail

 

Advantages

• Extended gear and bearing life due to minimal deposits and longer seal life
• Increased load carrying capability and reduced operating costs
• Reduced wear and longer component life
• Reduced number of gear lubricants to simplify inventory and minimize misapplication

 

Additional Information:

 

• Delivery Time: immediate
• Packaging Details: 20 liter to 210 liter