• Unique and Reliable Design of the Dalia Making Machines series pulverizers are highly effective as well as nonstop continuous pulverizing process
• All contacting parts are non corrosive materials
• All Rotating parts are dynamical balanced for less vibration & higher performances
• Low temperature grinding technology thus the original ingredient cannot destroy
• Ideal for dry crushing
• Increased production leading to faster return on the investments
• Hardened & fully machined shelving type beaters thus less wear & Tear
• Single pieces grinding chamber no separate joints of fabrication for out late

Operating Principle of Dalia Making Machinery

The flow of material from the feeding hopper is regulating by means of side handle easily to suit the load. Rotorruns in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half ofthe crushing chamber, leaving a gap of 3 mm between the liner teeth and the tips of the rotating beaters. This cutsthe material caught between the liner teeth like a sword with a scissors action at a 450 RPM. After the required sizereduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber.No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The airgenerated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge endof the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)

• Suitable totally enclosed fan cooled single or three phase squirrel cage motor as per is: 325 or 996 is suppliedwith mono pulverizer electricity (special power can be accommodated): 110/220/380/415 volts, 50/60 Hz, 1/3phase
• Suitable miniature circuit breaker as per is: 8828 with 3 meter cable and 3 pin top as per is: 1293 are suppliedwith daliya machine as extra cost or 3 meter 4 core cable, starter, ampere meter, and capacitor, are supplied withdaliya machine at extra cost
• All contacting parts stainless steel 304 / 316 can be accommodated

Application of dalia making plant

The techno wings daliya making pulverizer are used for a producing dalia of wheat (broken wheat for wheat porridge, dalia), maize daliya. maize grits, corn grits, etc.

Commercial dalia machine is made from heavy duty cast iron base. Cast iron oil chamber

housings are for long life of bearings. Aluminum grinding chamber lined with serrated stainless steel plates, whichprotects the body from wear and tear. Grinding done by a set of stainless fixed better on a balanced rotor. A screenclassifier forms the lower half of the grinding chamber.

Mini Dal Mill is a semi automatic composite unit consisting of a Dehusking machine, an aspirator assembly and a reciprocating sieve arrangement. Entire system operates by 2 HP electronic motor. This is latest model, having capacity of Dal processor machine about 125kg of pulses per hour provided with automatic arrangement of collecting husk, desusked and split pulses.

• Automatic arrangement of collecting the .
• Retains proteins and Natural shine.
• Pollution free.
• Weight 270kg (approx.).

Silent Features:

• Compact model and elegant looks
• Easier operation, better output and low maintenance cost.
• Deusking, Splitting, Separation & Grading all in one machine.
• Rectangular large size screens(Interchangeable) for better cleaning. Rust proof roller sieves.
• Arrangement of collecting the dehusked, Split pulses, husk & brokens in separate outlet.
• Environment friendly
• Stable and sturdy machine, Square pipe construction.
• Low Power Cunsumption

• Unique and Reliable Design of the Dalia Making Machines series pulverizers are highly effective as well as nonstop continuous pulverizing process
• All contacting parts are non corrosive materials
• All Rotating parts are dynamical balanced for less vibration & higher performances
• Low temperature grinding technology thus the original ingredient cannot destroy
• Ideal for dry crushing
• Increased production leading to faster return on the investments
• Hardened & fully machined shelving type beaters thus less wear & Tear
• Single pieces grinding chamber no separate joints of fabrication for out late

Operating Principle of Dalia Making Machinery

The flow of material from the feeding hopper is regulating by means of side handle easily to suit the load. Rotorruns in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half ofthe crushing chamber, leaving a gap of 3 mm between the liner teeth and the tips of the rotating beaters. This cutsthe material caught between the liner teeth like a sword with a scissors action at a 450 RPM. After the required sizereduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber.No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The airgenerated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge endof the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)

• Suitable totally enclosed fan cooled single or three phase squirrel cage motor as per is: 325 or 996 is suppliedwith mono pulverizer electricity (special power can be accommodated): 110/220/380/415 volts, 50/60 Hz, 1/3phase
• Suitable miniature circuit breaker as per is: 8828 with 3 meter cable and 3 pin top as per is: 1293 are suppliedwith daliya machine as extra cost or 3 meter 4 core cable, starter, ampere meter, and capacitor, are supplied withdaliya machine at extra cost
• All contacting parts stainless steel 304 / 316 can be accommodated

Application of dalia making plant

The techno wings daliya making pulverizer are used for a producing dalia of wheat (broken wheat for wheat porridge, dalia), maize daliya. maize grits, corn grits, etc.

Commercial dalia machine is made from heavy duty cast iron base. Cast iron oil chamber

housings are for long life of bearings. Aluminum grinding chamber lined with serrated stainless steel plates, whichprotects the body from wear and tear. Grinding done by a set of stainless fixed better on a balanced rotor. A screenclassifier forms the lower half of the grinding chamber.

Mini Dal Mill is a semi automatic composite unit consisting of a Dehusking machine, an aspirator assembly and a reciprocating sieve arrangement. Entire system operates by 2 HP electronic motor. This is latest model, having capacity of Dal processor machine about 125kg of pulses per hour provided with automatic arrangement of collecting husk, desusked and split pulses.

• Automatic arrangement of collecting the .
• Retains proteins and Natural shine.
• Pollution free.
• Weight 270kg (approx.).

Silent Features:

• Compact model and elegant looks
• Easier operation, better output and low maintenance cost.
• Deusking, Splitting, Separation & Grading all in one machine.
• Rectangular large size screens(Interchangeable) for better cleaning. Rust proof roller sieves.
• Arrangement of collecting the dehusked, Split pulses, husk & brokens in separate outlet.
• Environment friendly
• Stable and sturdy machine, Square pipe construction.
• Low Power Cunsumption