Ghaziabad, Uttar Pradesh, India
Verified
Add Review
Our Products
Specifications
| Input Voltage | 180-260 V With No Noticeable Light Fluctuation. |
|---|---|
| Expected Input Frequency | 50 Hz +/-Allowable Tolerance |
| Power Factor | .09 Or Leading |
| Led Efficiency | Total Lumen - 7500 |
| Luminary Efficiency | 0.7 |
| Beam Angle | 120 Degree |
| Total Harmonic Distortion | Less Than 20 % |
| Working Temperature | -5 To + 50 Degree |
| Wattage | 50 Watt +- 5 % |
| Working Humidityworking Humidity | 10% - 90% Rh ( Preferably Hermetically Sealed Unit.) |
| I P Protection Level | Ip-65 Class Protection, With Covered Toughened Clear Glass/ Uv Stabilised Acrylic, Sealed With Silicone Gaskets. |
| Lamp Casing | Powder Coated , |
| Life | 35000 |
| Led Type | Edison |
| Color Temperature | 6500 K6500 K |
| Cri | 75 |
| Tj | Should Be Minimum To Ensure A Minimum Life Of 50,000Hours, L70 Life As Per Led Manufacturers Datasheet. |
| Electrical Connector | Lead Wire With Minimum 1 Meter Long |
| Environment Considerations | Environment Friendly And 100% Green |
| Modular Design Required | Led Modules Should Be Easily Replaceable |
| Thermal Management | Heat Sink Temperature To Not Exceed Max 15 Degrees Centigrade Above Ambient. |
| Enclosure | Ex D As Per Is 2148 |
| Area Classification | Gas Plant, Oil Refinery, Paint Shop, |
| Material Of Construction | Cast Aluminum Alloy Lm-6 |
| Transparent Part | Heat Resistance Clear Glass |
| Weight | 20 Kg +-10 % |
| Dimension | Length -1655 Mm, Height- 143 Mm, Width- 350 Mm |
Specifications
| Input voltage | 180-260 V with no noticeable light fluctuation. |
|---|---|
| Expected Input | 50 HZ +/-allowable tolerance tolerance |
| Power Factor | .09 or leading |
| LED efficiency | Total Lumen - 4800 |
| Luminary efficiency | 0.7 |
| Beam Angle | 120 degree |
| Total Harmonic Distortion | Less than 20 % |
| Working Temperature | -5 To + 50 degree |
| Wattage max | 40 watt +- 5 % |
| Working Humidity | 10% - 90% RH ( preferably Hermetically sealed unit.) |
| I P Protection Level | IP-65 class protection, with covered toughened clear glass |
| UV stabilised acrylic, sealed with silicone gaskets. | |
| Lamp Casing | Powder coated , Cast Aluminum alloy |
| Life | 35000 |
| LED Type | Edison/ Everlite |
| Color temperature | 6500 K |
| CRI | 75 |
| TJ | Should be minimum to ensure a minimum life of 50,000hours, |
| L70 life as per LED manufacturers datasheet. | |
| Electrical Connector | Lead wire with minimum 1 meter long |
| Environment considerations | Environment friendly and 100% green |
| Modular design required | LED modules should be easily replaceable |
| Thermal management | Heat sink temperature to not exceed max 15 degrees |
| centigrade above ambient. | |
| Enclosure | EX D as per IS 2148 |
| Area classification | Gas plant, Oil refinery, Paint shop, |
| Transparent part | Heat resistance clear glass |
| Weight | 5 KG +-10 % |
| Dimension | Dia -250 MM Height -185 MM +- 5 % |
Specifications
| Input voltage | 180-260 V with no noticeable light fluctuation. |
|---|---|
| Expected Input | 50 HZ +/-allowable tolerance |
| Power Factor | .09 or leading |
| LED efficiency | Total Lumen - 6000 |
| Luminary efficiency | 0.7 |
| Beam Angle | 120 degree |
| Total Harmonic Distortion | Less than 20 % |
| Working Temperature | -5 To + 50 degree |
| Wattage max | 40 watt +- 5 % |
| Working Humidity | 10% - 90% RH ( preferably Hermetically sealed unit.) |
| I P Protection Level | IP-65 class protection, with covered toughened clear glass |
| UV stabilised acrylic, sealed with silicone gaskets. | |
| Lamp Casing | Powder coated , Cast Aluminum alloy |
| Life | 35000 |
| LED Type | Edison/ Everlite |
| Color temperature | 6500 K6500 K |
| CRI | 75 |
| TJ | Should be minimum to ensure a minimum life of 50,000hours, |
| L70 life as per LED manufacturers datasheet. | |
| Electrical Connector | Lead wire with minimum 1 meter long |
| Environment considerations | Environment friendly and 100% green |
| Modular design required | LED modules should be easily replaceable |
| Thermal management | Heat sink temperature to not exceed max 15 degrees |
| centigrade above ambient. | |
| Enclosure | EX D as per IS 2148 |
| Area classification | Gas plant, Oil refinery, Paint shop, |
| Transparent part | Heat resistance clear glass |
| Weight | 12 KG +-10 % |
| Dimension | Cut out - 530 x 270 MM, Height- 315 MM |
