EMKAY CERAMIC INSULATED STRIP HEATERShave proven to be extremely efficient and dependable for surface heating, air heating and radiant heating applications. Strip heaters are capable of operating at sheath temperatures up to 1200F (650C). The basic design consists of helically wound resistance coil evenly strung through specially designed ceramic insulators. Resistance coil is mechanically connected to screw terminal or lead wires for positive connection. Ceramic strip heaters are available in different sizes and in a variety of termination styles to fit most of your requirements.

EMKAY FINNED STRIP HEATERSare extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. Used for mounting across air stream with forced-air ducts, or to heat by convection. Galvanised plated fins are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned Cross Sections, thus resulting in rapid heat transfer to air. EMKAY FINNED STRIP heaters are manufactured in a full line of standard sizes, electrical ratings and terminations or made to your specifications.

EMKAY TABULAR HEATERSare the most versatile and widely used source of heat throughout the industry for commercial, industrial, and scientific heating applications. Quality materials and carefully researched manufacturing method make Emkay Tubular heaters stand apart from other heating elements claiming the same performance characteristics.

Applications :

1. Cast in heaters are formed tubular heaters placed in aluminium, brass or silicon-bronze castings. Typical uses are for heat sealing platens, barrel heating of extruders and plastic injection molding machines. Heating of irregular or non symmetrical surfaces and cast tanks with built in heaters.
2. Emkay Tabular heaters are often used to heat substances directly. Typical examples are restaurant steam Tables and laboratory water baths.

EMKAY SEALED NOZZLE HEATERSare the result of continued research and dedication. These Nozzle Heaters are specially designed to sustain under leakage with abrasive resistant lead terminals, to get good heater life.

EMKAY CARTRIDGE HEATERwere developed for heating applications not requiring high watt densities nor sheath temperatures exceeding 1200F (650C) with maximum watt densities of 30 to 45 watts per square inch depending on application.
Emkay Cartridge heater design consist of a helically wound resistance coil made from nickel-chrome wire, evenly stretched & strung through holes in a round cordierite ceramic insulator. Emkay Cartridge Heaters are manufactured in a complete range of standard physical dimensions, electrical ratings and lead termination.
Our Engineering staff stands ready to assist you in selecting and designing cartridge heater to meet your most demanding specifications for your particular heating application.

EMKAY FINNED TABULAR HEATERS provide rapid heat transfer when mounted across air stream, with in forced air ducts or forced air heating system. Extremely efficient and dependable for industrial and commercial applications requiring forced convection heat.
Finned Tubular heater basic manufacturing design consists of steel sheath tubular heating elements with a continuous edge-wound strip of metal creating spiral fins, at the rate of 4-5 per linear inch. The spiral fins are furnace brazed to the element sheath, thus providing permanent attachment and maximising heat transfer to the fins and process.

EMKAY CERAMIC ISULATED BAND HEATERSare specifically designed and engineered to meet the ever increasing demand for energy conservation and to improve operation efficiency, capable of generating higher temperature essential to process todays high temperature resins. Energy conservation is achieved by using a thick ceramic fiber insulating blanket, reducing power consumption by 25 to 30%. Because of the low thermal conductivity of the ceramic fiber insulation, the external surface temperature of the Ceramic band heater is approximately 400F while running the inside surface temperature at 1200F.
Emkay ceramic band heaters have become extremely popular among original Equipment Manufacturers as standard heaters for the barrels of Plastic Injection Molding Machines, Extruders and Blow Molding equipment. Our innovatively designed CLAMPING SYSTEM facilitates easy installation of heaters.

EMKAY CERAMIC INSULATED STRIP HEATERShave proven to be extremely efficient and dependable for surface heating, air heating and radiant heating applications. Strip heaters are capable of operating at sheath temperatures up to 1200F (650C). The basic design consists of helically wound resistance coil evenly strung through specially designed ceramic insulators. Resistance coil is mechanically connected to screw terminal or lead wires for positive connection. Ceramic strip heaters are available in different sizes and in a variety of termination styles to fit most of your requirements.

EMKAY FINNED STRIP HEATERSare extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. Used for mounting across air stream with forced-air ducts, or to heat by convection. Galvanised plated fins are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned Cross Sections, thus resulting in rapid heat transfer to air. EMKAY FINNED STRIP heaters are manufactured in a full line of standard sizes, electrical ratings and terminations or made to your specifications.

EMKAY TABULAR HEATERSare the most versatile and widely used source of heat throughout the industry for commercial, industrial, and scientific heating applications. Quality materials and carefully researched manufacturing method make Emkay Tubular heaters stand apart from other heating elements claiming the same performance characteristics.

Applications :

1. Cast in heaters are formed tubular heaters placed in aluminium, brass or silicon-bronze castings. Typical uses are for heat sealing platens, barrel heating of extruders and plastic injection molding machines. Heating of irregular or non symmetrical surfaces and cast tanks with built in heaters.
2. Emkay Tabular heaters are often used to heat substances directly. Typical examples are restaurant steam Tables and laboratory water baths.

EMKAY SEALED NOZZLE HEATERSare the result of continued research and dedication. These Nozzle Heaters are specially designed to sustain under leakage with abrasive resistant lead terminals, to get good heater life.

EMKAY CARTRIDGE HEATERwere developed for heating applications not requiring high watt densities nor sheath temperatures exceeding 1200F (650C) with maximum watt densities of 30 to 45 watts per square inch depending on application.
Emkay Cartridge heater design consist of a helically wound resistance coil made from nickel-chrome wire, evenly stretched & strung through holes in a round cordierite ceramic insulator. Emkay Cartridge Heaters are manufactured in a complete range of standard physical dimensions, electrical ratings and lead termination.
Our Engineering staff stands ready to assist you in selecting and designing cartridge heater to meet your most demanding specifications for your particular heating application.

EMKAY FINNED TABULAR HEATERS provide rapid heat transfer when mounted across air stream, with in forced air ducts or forced air heating system. Extremely efficient and dependable for industrial and commercial applications requiring forced convection heat.
Finned Tubular heater basic manufacturing design consists of steel sheath tubular heating elements with a continuous edge-wound strip of metal creating spiral fins, at the rate of 4-5 per linear inch. The spiral fins are furnace brazed to the element sheath, thus providing permanent attachment and maximising heat transfer to the fins and process.

EMKAY CERAMIC ISULATED BAND HEATERSare specifically designed and engineered to meet the ever increasing demand for energy conservation and to improve operation efficiency, capable of generating higher temperature essential to process todays high temperature resins. Energy conservation is achieved by using a thick ceramic fiber insulating blanket, reducing power consumption by 25 to 30%. Because of the low thermal conductivity of the ceramic fiber insulation, the external surface temperature of the Ceramic band heater is approximately 400F while running the inside surface temperature at 1200F.
Emkay ceramic band heaters have become extremely popular among original Equipment Manufacturers as standard heaters for the barrels of Plastic Injection Molding Machines, Extruders and Blow Molding equipment. Our innovatively designed CLAMPING SYSTEM facilitates easy installation of heaters.