Emerge Wagner India Private Limited Bangalore, Karnataka

End Suction Pumps are all non- self-priming single-stage, centrifugal volute pumps with axial suction port, radial discharge port and horizontal shaft. These pumps are coupled pumps with TEFC squirrel cage induction motors with main dimensions complying with IEC standard. These pumps have the discharge range from up to 2700 m3/h & head range from 129 m. End suction centrifugal pump suitable for multi-purpose application. SAER End suction Pumps come in two ranges :

• End Suction Pumps dimensions according EN 733
• End Suction Pumps dimensions exceeding EN 733

END SUCTION PUMPS ACCORDING TO EN 733
Operation Condition

• Max Head    : 129 M (423 ft)
• Max Capacity : 675 m3/hr
• Temp of Pumped Liquid : -15^oC up to +120^oC
• Frequency : 50 Hz
• RPM : 2900

Other Materials Available on offer : Carbon Steel, Brass, Stainless

Features

• The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping.
• Closed impeller dynamically balanced and with balance holes for the balancing of the axial thrust.
• Shaft completely in stainless steel, greased ball bearings, flanges (UNI EN 1092-2) : up to DN
• NCB : bareshaft end-suction centrifugal pumps,
• NCBZ : bareshaft end-suction centrifugal pumps with electric motor, on a base.
• NCBT : bareshaft end-suction centrifugal pumps with dimensions exceeding steel, SS-316, Cast Iron

Applications

• Recycling plants
•  Heating, air conditioning
• Heat recovery
• Plants of water supply procurement,
• Pressurizing units
• Fire-fighting systems

Special Versions

• Constructive materials
• Different mechanical seals
• Special tensions
• Accessories On Request
• Kit counter flanges
• Motors with PTC protection

SAER Submersible Pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SAER submersible pumps are ideal for a wide variety of applications.

Radial Submersible Electric Pumps Operation Condition

Operation Condition

• Max Head  : 955 M (3133 ft.)
• Max Capacity : 210m3/ Hr
• Pumps size : 4” 6” 8” 10”
• Temp of Pumped Liquid  : 0^oC to 40^oC
• RPM  : 2900
• Maximum immersion depth : 200 m under liquid level
• Max pressure : 22 bar
• Grain size of  silt : 200gm/m³

Pumps Construction

• Impellers : Polycarbonate loaded with fiber glass.
• Diffusers :  Noryl (techno polymer) loaded with fiber glass.
• Shaft : AISI431 stainless steel (on request, AISI316), with grooved profile.
• Outlet and suction support : Brass or coated carbon steel (on request stainless steel AISI304)
• External shell : Stainless steel AISI304.

Other Materials Available on offer : Carbon Steel, Brass, SS-316, SS-304, Noryl, Cast Iron

Features

•  Complete unit of pump with electric motor oil bath range CL95
•  Hydraulic part to be connected with 4” submersible motors with coupling following NEMA MG1-18.388
• The FS 98 series uses axial sliding floating impellers, which avoid the jam up of the pump even with the presence of sand.
• Outlet complete with non-return ball valve.
• Driving bushings in anti-wear rubber.
• Components realized with particular materials which assure a high wear resistance.
• This pump is an ideal solution in pumping water with suspended sand particles up to 300 g/m^3.

Application

• Suitable for lifting, pressurising and distribution in
• Civil and industrial installations
•  Autoclave and cistern inlets
• Washing plants
•  Irrigation systems
• Draws from wells of min. diameter of 104 mm, tanks or natural basins.

Installation

• Vertical / horizontal (depending on power).
• Special Versions
• Range XFS98 with inlet and outlet in stainless steel AISI304 precision castings.

Semi-axial Submersible Electric Pumps

Operation Condition

• Max Head : 388M (1273ft)
• Max Capacity  : 725m3/hr
• Pump Size   :  6”, 8”, 10”, 12”, 14”
• Temp of Pumped Liquid : 0^oC to 35^oC
• Frequency : 50 Hz
• Rpm :  2900
• Maximum immersion depth : 300 m under liquid level
• Max pressure : 45 bar
• Grain size silt  :  300gm/m³

Pumps Construction

• Impellers  : Cast iron EN-GJL-250 (brass for model K and X) or FeG450 steel.
• Diffusers :  Cast iron EN-GJL-250 or FeG450 steel.
• Shaft : AISI431 stainless steel, with grooved profile.
• Outlet : Cast iron EN-GJL-250 or FeG450 steel.
• Suction support : Cast iron EN-GJL-250 or FeG450 steel.

 Materials Available : Carbon Steel, Brass, SS-316, Duplex Steel, Cast Iron

Features

• Complete unit of pump with electric motor.
• SP hydraulic part to be connected with 4” submersible motors with coupling following NEMA MG1-18.388 or 6” submersible motors with coupling following NEMA MG1-18.401- 18.413
• Semi axial impellers.
• Outlet complete with non-return valve.
• Pump equipped with counter trust ring in anti-wear resin. Diffuser complete with wear ring in anti-wear rubber.
• Driving bushings in anti-wear rubber with metallic shell.
• Components realized with particular materials which assure a high wear resistance.

Installation  - Vertical.
Special Versions

• XS and XVS Series entirely made of stainless steel
• SB series made of marine bronze (up to max 25 bar)
• Different tensions
• Version for horizontal installation.

Application

• Suitable for lifting, pressurizing and distribution in
• Civil and industrial installations,
•  Autoclave and cistern inlets,
• Washing plants,
•  Irrigation systems.
•  Draws from wells of min. diameter of 158 mm, tanks or natural basins.

SAER Open well enbloc submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, MBS pumps are ideal for a wide variety of applications. SAER pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, SAERMBS range offers high efficiency, high resistance to sand and other abrasives and allows solid contents, motor burnout protection, and easy maintenance.

Operation Condition

• Max Head : 113M (371 ft)
• Max Capacity : 18m3hr
• Temp of Pumped Liquid : 0^{oC to 40oC}
• Frequency : 50 Hz
• Maximum quantity of sand allowed in water : 50 gm^3.
• Suction of solid bodies : Max mm 2.5
• Minimum level of liquid : 100mm from bottom of suction grid.
• Maximum depth of application : up to 70 m below the water level.

• 
  Pumps Construction

  • Outer Jacket Motor & Pump : AISI 304 SS standard.
  • Impellers and diffusers : Hardwearing, thermoplastic resin
  • Enbloc Shaft:AISI 431 stainless steel
  • Mechanical seals : Graphitealumina oxide silicon carbide

  • 
    Features

    • Allowed solid contents up to 50 gm^{3 , max size of solid Contain is up to 2.5mm}
    • Outer jacket made entirely from AISI 431 stainless steel, including delivery casing with 1 14 G threaded outlet
    • Diffusers fitted with self-adjustable wear rings
    • Enbloc pump and motor shaft supported at three points
    • Permanently pre-lubricated bearings
    • Interposed oil chamber (FDA-approved, non-toxic oil).
    • Motor with outer jacket in AISI 304 steel, cooled by the pumped liquid
    • IP 68 Protection class
    • Pump-motor unit is easily dismantled and repaired

    • Applications

      • Water supply from open well, tanks & Sumps
      • Agricultural Applications
      • Residential & Civil Applications from 6
      • Pressurizing water for commercial application