Post Buy Requirement
EW
Bangalore, Karnataka, India
Add Review

Other Products / Services #3745050

Monobloc Close Coupled Pumpsets

SAER Monobloc Pumps are designed and manufactured for optimum efficiency to cater to different needs of water handling. The pump range is suitable for a wide range of applications in Commercial, Industrial areas, domestic Applications. SAER mono bloc pumps are available in various series depending on applications requirements, like pump couple with motor, stub shaft pumps ETC.

Close Coupled Electric Pumps Operation Condition

  • Max Head : 100 M (328 ft)
  • Max Capacity : 400 m3hr
  • Temp of Pumped Liquid :15oC to 120oC
  • Frequency : 50 Hz
  • Rpm : 2900
  • Sucking DN : 50 to 100 mm
  • DN capacity : 32 to 80 mm

    • Pumps ConstructionPump body with dimension and performances according to EN 733 rules, closed impeller dynamically balanced and with balance holes for the balancing of the axial thrust. Shaft completely in stainless steel, greased ball bearings, flanges (UNI EN 1092-2): up to DN 150: PN16, from DN 200:PN10.

      Applications

      • Recycling plants
      • Heating, air conditioning
      • Heat recovery
      • Plants of water supply procurement,
      • Pressurizing units
      • Fire-fighting systems.
View Complete Details

Solar Powered UPS

Emerge Solar powered UPS is a hybrid PV inverter which consists of Grid input, PV input, battery input, and AC output. The EMERGE sine wave inverter, the heart of this system, is known for its exceptional standard of efficiency and reliability. This system also includes AGM batteries. Charge controller manages the solar panel output and input to the inverter battery. It can supply power to load from PV source, battery or both sources simultaneously. We are offering wide range of Solar Home UPS, which is offered in standard as well as customized formats. Our range of Solar Home UPS meets all the quality criteria established by national and international authorities. All our range of product is procured from trusted vendors and thoroughly checked at our end.

Features

  • DSP based; less components, small size less electricity bill more efficiency
  • Soft start features; protects appliances at startup.
  • Supply the highest quality pure sine wave power; protects your expensive household appliance and sensitive office equipments.
  • Easy to operate.
  • Low maintenance cost.
  • Over load and D.C. low protection.
  • Fully computer friendly UPS operation.
  • Intelligent Auto sense; continuously monitors health of system.
  • AC Input low and high voltage cut off protections in both, inverter and U.P.S. modes.
  • Constant voltageConstant current pulse charging.
  • Quick change over from Mains to inverter mode.
  • Software controlled Auto reset feature for over load, short ckt and low battery
  • Fully protected against short circuit of AC mains with output.
  • Phase to phase short circuit protection.
  • Very low no load current for prolonged battery operation under standby.
  • Intelligent charging; adapts itself to low, high battery, more and less power cut areas, battery health conditions.
View Complete Details

Custom Built OEM Motors

A variety of industrial applications require Custom Built Motors to suit special requirements and applications. In custom built range, we offer motors with variations in mechanical & electrical parameters based on customers application requirements. Use of custom built motors results in making the motor applications much easier for the OEM manufacturer and the user customer, saves on cost and gives freedom to designers to select a motor which is best suited for their application with varying design parameters.

Features

  • Energy efficient High efficiency
  • High Starting torque
  • Short manufacturing cycle for the OEM
  • Cost Competitive
  • Squirrel cage motors
  • Various cooling arrangements such as TE, TEFC etc.
  • Dynamic balanced rotor & shaft
  • High efficiency & power factor
  • Vacuum Pressure Impregnated
  • Low noise level
  • Compatible with 60HZ & 50HZ supply
  • CE SA certified Motors
  • Class 'F' insulation as standard
  • Dual Speed Motors
  • Dual Voltage Motors
  • 63 to 90 frame sizes are generally available in aluminum construction and 100 to 160L frame sizes are in cast iron. However, any frame can be given in both CI and AL.
    • Range

      • Power : 0.37 to 22.0 kW
      • Polarity : 2P, 4P, 6P, 8P
      • Mounting : Foot, Flange, Face or any other as required
      • Frame Size : 71 to 160
      • Voltage : 415V 10% or as required
      • Frequency : 50Hz 5% or as required
      • Ambient : 50oC.
      • Enclosure : TE, TEFC or as required
      • Protection : IP55
      • Insulation class : Class F insulation with temp. Rise limited to class B.
View Complete Details

Solar Home Power Generators

Emerge offers renewable and environment-friendly Solar Home Power generators, capable of generating large amount of electricity from solar energy. The offered range of solar power plants is available in different customized specifications and forms as per the diverse requirements of valued clients. This technology transforms the solar energy into electric energy (electricity), the battery in these power plants store the solar energy for later use. We use most advanced, fine quality and optimum quantity of materials & components in developing these products, and are offered at competitive prices so as to make use of solar energy economically for viability to the customer.

Features

  • Eco-friendly
  • Optimum performance
  • Reasonable price
  • Low maintenance
  • Reliable

    • Our Solar home power generators consists of

      • Polycrystalline silicon Solar panel (Monocrystalline panel optional)
      • MPPT charge controller.
      • Maintain-free battery
      • Pure sine wave inverter and
      • Mounting structures.
      • Overload, Over-temperature, Over-discharge, and Short circuit protection.
      • Digital LCD display indicates battery capacity status, working power, output power.etc.
      • Automatic City Power switch function
View Complete Details

Pressure Boosting HYPN Systems

Booster sets consist of 2 to 4 identical vertical multistage pumps mounted in parallel on a common base frame, control cabinet panel with motor protection and integrated AT series controller. These pumps are automatically operated according to system requirement by means of pressure switches (one for each pump). The setting of the pressure switches have to be within the optimal performance area of each pump model.
Sear pressure boosting systems are supplied as complete, preassembled and tested systems including suction and discharge manifolds, isolating valves, non-return valves, pressure gauge and pressure switches. In three phase & single phase.

Operation Condition

  • Max Head : 92 M
  • Max Capacity : 20 m3hr
  • Temp of Pumped Liquid : min -15oC max 50oC
  • Frequency : 50 Hz
  • Rpm : 2900
  • Max pressure : 8 bar
    • Pumps Construction

      • Pump body : Cast iron,
      • Impeller : Brass or thermoplastic resin
      • Diffuser : Thermoplastic resin, mechanical seal in carbonceramic
      • Rotor shaft : Steel fitted with seal for life bearings
        • Features

          • Composition of the Group
          • Self-priming pumps Jet with ejector pumps in series
          • Base in bent sheet and coated in cataphoresis, supplied with adjustable and anti-vibration feet
          • Control panel
          • Column for control panel holding in bent sheet and coated in cataphoresis
          • Suction manifold
          • Delivery manifold set for the connection of diaphragm tanks
          • Manometer on delivery manifold
          • Control pressure switch for each pump
          • Gate valve on suction and on delivery for each pump
          • One check valve for each pump (optionally on suction or on delivery)
          • 2 closing plugs
View Complete Details

Solar Inverters

Harness the energy of the sun - with a Solar Inverter from Emerge. They convert the direct current generated by solar panels into high-quality alternating current that can be fed into the power network. Designed to meet the needs of the entire supply chain – from system integrators and installers to end users.

We offer you the right device for each application: for all module types, for grid-connection and feeding into stand-alone grids, for small house systems and commercial systems in the Megawatt range

Features

  • High total efficiency
  • MPPT accuracy up to 99.9%.
  • Built-in and monitored system protection devices
  • High maximum input voltage
  • Wide DC input voltage range
  • Detachable control unit with graphical display
  • Integrated performance data monitoring
  • Both Transformers less design (indoor) and with Transformer (higher range) for high power density, and more convenient for installation.
  • Outdoor IP55 enclosure with additional safety features
  • Grid support functions
View Complete Details

Multistage Vertical In Line Pumps

Vertical multistage centrifugal pumps with in-line design enable the pump to be installed in a horizontal one-pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions. Vertical Multistage Pump comes with various sizes and various numbers of stages to provide the flow and the pressure for different site conditions. Vertical multistage pump is suitable for a wide variety of applications from pumping of potable water to the pumping of chemicals.

Operation Condition

  • Max Head : 94 M (1292ft)
  • Max Capacity : 40 m3hr
  • Operation Condition
  • Max Head : 94 M (1292ft)
  • Max Capacity : 40 m3hr
  • Temp of Pumped Liquid : 0oC to 35oC
  • Frequency : 50 Hz
  • Rpm : 2900
  • Max pressure : 25 bar 0oC to 35oC
  • Frequency : 50 Hz
  • Rpm : 2900
  • Max pressure : 25 bar

    • Pumps Construction

      • Coupling spider : Cast iron EN-GJL-250
      • Basement : Cast iron EN-GJL-250.
      • Tube : Stainless steel AISI304
      • Diffuser : Pressed stainless steel AISI304
      • Impeller : Pressed stainless steel AISI304
      • Shaft : Stainless steel AISI431
      • Bidirectional mechanical seal : Graphite SiC EPDM
        • On request, AISI 316 and SS Duplex can be given instead of AISI304 & AISI431 respectively.

          Features

          • Thrust bearing included in the pump : pump series MK are equipped with a bearing necessary for supporting the axial thrust generated by the pump. This allows to couple to the pump, the standard normalized motors without turning normalizing motor equipped with axial bearing.
          • Normalized mechanical seal : mechanical seals are according to UNI EN 12756 rules. This allows an easy availability in case of need.
          • Shafts supported and guided by bushings in wear proof material
          • Double wear ring : Diffusers equipped with double wear ring in self-lubricating material (Teflon for MK32-40 bronze for MK50-65)
          • Wide range : 11 families for power up to 37kw available with different shapes, metallurgies and motors
          • Version with frequency converter (up to 5, 5kW)
          • Diffuser equipped with wear ring self-centering Cover: cast iron EN-GJL-250
          • Pump equipped with thrust bearing
View Complete Details

Repairing & Maintenance Services

We are engaged in rendering the best Repairing & Maintenance Services across India. We have a team of highly qualified and trained service engineers to support our front line staff and to provide after-sales support including Repairing & Maintenance Services, to all our esteemed customers. We provide quality Repairing & Maintenance Services within stipulated timeframe, so that our clients get highly satisfied from our service.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

List of Other Products by Emerge Wagner India Private Limited from Bangalore, Karnataka.

Other Products / Services #3745050

We offer the best product range of Monobloc Close Coupled Pumpsets, Custom Built OEM Motors, Pressure Boosting HYPN Systems, Repairing & Maintenance Services and saer elettropompe pumps.

Monobloc Close Coupled Pumpsets

SAER Monobloc Pumps are designed and manufactured for optimum efficiency to cater to different needs of water handling. The pump range is suitable for a wide range of applications in Commercial, Industrial areas, domestic Applications. SAER mono bloc pumps are available in various series depending on applications requirements, like pump couple with motor, stub shaft pumps ETC.

Close Coupled Electric Pumps Operation Condition

  • Max Head : 100 M (328 ft)
  • Max Capacity : 400 m3hr
  • Temp of Pumped Liquid :15oC to 120oC
  • Frequency : 50 Hz
  • Rpm : 2900
  • Sucking DN : 50 to 100 mm
  • DN capacity : 32 to 80 mm

    • Pumps ConstructionPump body with dimension and performances according to EN 733 rules, closed impeller dynamically balanced and with balance holes for the balancing of the axial thrust. Shaft completely in stainless steel, greased ball bearings, flanges (UNI EN 1092-2): up to DN 150: PN16, from DN 200:PN10.

      Applications

      • Recycling plants
      • Heating, air conditioning
      • Heat recovery
      • Plants of water supply procurement,
      • Pressurizing units
      • Fire-fighting systems.
View Complete Details

Solar Powered UPS

Emerge Solar powered UPS is a hybrid PV inverter which consists of Grid input, PV input, battery input, and AC output. The EMERGE sine wave inverter, the heart of this system, is known for its exceptional standard of efficiency and reliability. This system also includes AGM batteries. Charge controller manages the solar panel output and input to the inverter battery. It can supply power to load from PV source, battery or both sources simultaneously. We are offering wide range of Solar Home UPS, which is offered in standard as well as customized formats. Our range of Solar Home UPS meets all the quality criteria established by national and international authorities. All our range of product is procured from trusted vendors and thoroughly checked at our end.

Features

  • DSP based; less components, small size less electricity bill more efficiency
  • Soft start features; protects appliances at startup.
  • Supply the highest quality pure sine wave power; protects your expensive household appliance and sensitive office equipments.
  • Easy to operate.
  • Low maintenance cost.
  • Over load and D.C. low protection.
  • Fully computer friendly UPS operation.
  • Intelligent Auto sense; continuously monitors health of system.
  • AC Input low and high voltage cut off protections in both, inverter and U.P.S. modes.
  • Constant voltageConstant current pulse charging.
  • Quick change over from Mains to inverter mode.
  • Software controlled Auto reset feature for over load, short ckt and low battery
  • Fully protected against short circuit of AC mains with output.
  • Phase to phase short circuit protection.
  • Very low no load current for prolonged battery operation under standby.
  • Intelligent charging; adapts itself to low, high battery, more and less power cut areas, battery health conditions.
View Complete Details

IE2 IE3 Certified Energy Efficient Motors

Emerge IE2 certified Energy Efficient High Efficiency Motors are TEFC squirrel cage motors manufactured exactly in the same IEC frame sizes as IE1 motors for easy interchangability and replacement with the existing running IE1 EFF2 or older motors. They have all the features and specifications as offered in the IE1 range, but offer higher full load efficiencies and also higher flat uniform horizontal efficiency curve from part loads as low as 40% to 100% than the standard IE1 EFF2 or older motors with no efficiency category or marking.

Emerge IE2 Energy Efficient High Efficiency Motors, like all high efficiency motors will offer and deliver better savings and results for motors with S1 duty cycles, operating continuously for long durations than motors which operate for short times or with frequent starts and stops. Hence, they are recommended for use in applications where motors run continuously. Since the IE2 motors cost more than the standard and IE1 motors due to use higher content of low loss magnetic materials, more winding to reduce thermal losses and manufactured to closer tolerances to reduce air gap etc., the benefit analysis or value for money is done based on pay back of the extra cost incurred. The long continuously running applications lead to more savings and reduction in the payback period to offset the additional cost incurred. These are especially so for the lower frames from 80 to 160 where the difference in efficiency & hence savings is substantial than the standard motors in same frames. In many of the higher frames in our IE1 series, we offer the IE2 efficiency levels as our standard and hence there may not be a need to go in for separate IE2 series. This applies to all our motors in 280 frames and above. For frames 160 250, the application can be studied or an energy audit conducted to estimate the difference in efficiencies and the resultant savings and then a decision can be made.

Emerge Motors are manufactured in high efficiency production lines with high quality machining centers, high speed stamping system and automatic winding machines with a strict quality control process in selection of materials, in manufacturing, assembly and testing with an automated micro-computer test centre and a well-coordinated measurement system.

Other Features

  • Energy efficient IE3 certified Motors can also be offered
  • Protection class : IP55
  • Rated Voltage 415V. Can offer 380V, 400V and 440V also.
  • Rated frequency 50HZ, can offer 60HZ also.
  • Various cooling arrangements
  • Ambient temperature 400 C.
  • Standard motors performance for altitudes 1000M above sea level.
  • Dynamically balanced rotor & shaft
  • Vacuum Pressure Impregnated Motor
  • Low noise level
  • CE SA certified Motors
View Complete Details

Custom Built OEM Motors

A variety of industrial applications require Custom Built Motors to suit special requirements and applications. In custom built range, we offer motors with variations in mechanical & electrical parameters based on customers application requirements. Use of custom built motors results in making the motor applications much easier for the OEM manufacturer and the user customer, saves on cost and gives freedom to designers to select a motor which is best suited for their application with varying design parameters.

Features

  • Energy efficient High efficiency
  • High Starting torque
  • Short manufacturing cycle for the OEM
  • Cost Competitive
  • Squirrel cage motors
  • Various cooling arrangements such as TE, TEFC etc.
  • Dynamic balanced rotor & shaft
  • High efficiency & power factor
  • Vacuum Pressure Impregnated
  • Low noise level
  • Compatible with 60HZ & 50HZ supply
  • CE SA certified Motors
  • Class 'F' insulation as standard
  • Dual Speed Motors
  • Dual Voltage Motors
  • 63 to 90 frame sizes are generally available in aluminum construction and 100 to 160L frame sizes are in cast iron. However, any frame can be given in both CI and AL.
    • Range

      • Power : 0.37 to 22.0 kW
      • Polarity : 2P, 4P, 6P, 8P
      • Mounting : Foot, Flange, Face or any other as required
      • Frame Size : 71 to 160
      • Voltage : 415V 10% or as required
      • Frequency : 50Hz 5% or as required
      • Ambient : 50oC.
      • Enclosure : TE, TEFC or as required
      • Protection : IP55
      • Insulation class : Class F insulation with temp. Rise limited to class B.
View Complete Details

Solar Home Power Generators

Emerge offers renewable and environment-friendly Solar Home Power generators, capable of generating large amount of electricity from solar energy. The offered range of solar power plants is available in different customized specifications and forms as per the diverse requirements of valued clients. This technology transforms the solar energy into electric energy (electricity), the battery in these power plants store the solar energy for later use. We use most advanced, fine quality and optimum quantity of materials & components in developing these products, and are offered at competitive prices so as to make use of solar energy economically for viability to the customer.

Features

  • Eco-friendly
  • Optimum performance
  • Reasonable price
  • Low maintenance
  • Reliable

    • Our Solar home power generators consists of

      • Polycrystalline silicon Solar panel (Monocrystalline panel optional)
      • MPPT charge controller.
      • Maintain-free battery
      • Pure sine wave inverter and
      • Mounting structures.
      • Overload, Over-temperature, Over-discharge, and Short circuit protection.
      • Digital LCD display indicates battery capacity status, working power, output power.etc.
      • Automatic City Power switch function
View Complete Details

Pressure Boosting HYPN Systems

Booster sets consist of 2 to 4 identical vertical multistage pumps mounted in parallel on a common base frame, control cabinet panel with motor protection and integrated AT series controller. These pumps are automatically operated according to system requirement by means of pressure switches (one for each pump). The setting of the pressure switches have to be within the optimal performance area of each pump model.
Sear pressure boosting systems are supplied as complete, preassembled and tested systems including suction and discharge manifolds, isolating valves, non-return valves, pressure gauge and pressure switches. In three phase & single phase.

Operation Condition

  • Max Head : 92 M
  • Max Capacity : 20 m3hr
  • Temp of Pumped Liquid : min -15oC max 50oC
  • Frequency : 50 Hz
  • Rpm : 2900
  • Max pressure : 8 bar
    • Pumps Construction

      • Pump body : Cast iron,
      • Impeller : Brass or thermoplastic resin
      • Diffuser : Thermoplastic resin, mechanical seal in carbonceramic
      • Rotor shaft : Steel fitted with seal for life bearings
        • Features

          • Composition of the Group
          • Self-priming pumps Jet with ejector pumps in series
          • Base in bent sheet and coated in cataphoresis, supplied with adjustable and anti-vibration feet
          • Control panel
          • Column for control panel holding in bent sheet and coated in cataphoresis
          • Suction manifold
          • Delivery manifold set for the connection of diaphragm tanks
          • Manometer on delivery manifold
          • Control pressure switch for each pump
          • Gate valve on suction and on delivery for each pump
          • One check valve for each pump (optionally on suction or on delivery)
          • 2 closing plugs
View Complete Details

Solar Inverters

Harness the energy of the sun - with a Solar Inverter from Emerge. They convert the direct current generated by solar panels into high-quality alternating current that can be fed into the power network. Designed to meet the needs of the entire supply chain – from system integrators and installers to end users.

We offer you the right device for each application: for all module types, for grid-connection and feeding into stand-alone grids, for small house systems and commercial systems in the Megawatt range

Features

  • High total efficiency
  • MPPT accuracy up to 99.9%.
  • Built-in and monitored system protection devices
  • High maximum input voltage
  • Wide DC input voltage range
  • Detachable control unit with graphical display
  • Integrated performance data monitoring
  • Both Transformers less design (indoor) and with Transformer (higher range) for high power density, and more convenient for installation.
  • Outdoor IP55 enclosure with additional safety features
  • Grid support functions
View Complete Details

Multistage Vertical In Line Pumps

Vertical multistage centrifugal pumps with in-line design enable the pump to be installed in a horizontal one-pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions. Vertical Multistage Pump comes with various sizes and various numbers of stages to provide the flow and the pressure for different site conditions. Vertical multistage pump is suitable for a wide variety of applications from pumping of potable water to the pumping of chemicals.

Operation Condition

  • Max Head : 94 M (1292ft)
  • Max Capacity : 40 m3hr
  • Operation Condition
  • Max Head : 94 M (1292ft)
  • Max Capacity : 40 m3hr
  • Temp of Pumped Liquid : 0oC to 35oC
  • Frequency : 50 Hz
  • Rpm : 2900
  • Max pressure : 25 bar 0oC to 35oC
  • Frequency : 50 Hz
  • Rpm : 2900
  • Max pressure : 25 bar

    • Pumps Construction

      • Coupling spider : Cast iron EN-GJL-250
      • Basement : Cast iron EN-GJL-250.
      • Tube : Stainless steel AISI304
      • Diffuser : Pressed stainless steel AISI304
      • Impeller : Pressed stainless steel AISI304
      • Shaft : Stainless steel AISI431
      • Bidirectional mechanical seal : Graphite SiC EPDM
        • On request, AISI 316 and SS Duplex can be given instead of AISI304 & AISI431 respectively.

          Features

          • Thrust bearing included in the pump : pump series MK are equipped with a bearing necessary for supporting the axial thrust generated by the pump. This allows to couple to the pump, the standard normalized motors without turning normalizing motor equipped with axial bearing.
          • Normalized mechanical seal : mechanical seals are according to UNI EN 12756 rules. This allows an easy availability in case of need.
          • Shafts supported and guided by bushings in wear proof material
          • Double wear ring : Diffusers equipped with double wear ring in self-lubricating material (Teflon for MK32-40 bronze for MK50-65)
          • Wide range : 11 families for power up to 37kw available with different shapes, metallurgies and motors
          • Version with frequency converter (up to 5, 5kW)
          • Diffuser equipped with wear ring self-centering Cover: cast iron EN-GJL-250
          • Pump equipped with thrust bearing
View Complete Details

Repairing & Maintenance Services

We are engaged in rendering the best Repairing & Maintenance Services across India. We have a team of highly qualified and trained service engineers to support our front line staff and to provide after-sales support including Repairing & Maintenance Services, to all our esteemed customers. We provide quality Repairing & Maintenance Services within stipulated timeframe, so that our clients get highly satisfied from our service.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us