Product / Services
Post Buy Requirement
EI
Emech India LLP
Mumbai, Maharashtra, India
Add Review
Call Now Call Now

Our Product / Services

  1. Drums 6 Products available
  2. Filters 5 Products available
  3. Electronic Components 3 Products available
  4. Laboratory Apparatus 3 Products available

  5. Polishing Machines

    2 Products available

  6. Dryers

    2 Products available

  7. Measuring Instruments & Equipment

    2 Products available

  8. Temperature Controller

    1 Products available

  9. Cleaning Chemicals

    1 Products available

  10. Natural And Synthetic Resin

    1 Products available
  11. Others Products / Services 15 Products / Services available

Other Products / Services #4486381

We offer the best product range of STANDARD PLATING RECTIFERS, Trichloroethylene Metal Degreasing Plant, SINGLE STAGE ULTRASONIC CLEANING SYSTEM, chiller unit and SINGLE CHAMBER FILTER UNIT.

STANDARD PLATING RECTIFERS

STANDARD PLATING RECTIFERS

A. C. INPUTRectifiers are designed to work off 415 V AC nominal 3 phases, 50Hz supply and are suitable for a range of 375V to 415-V. Units of very small capacities namely 8V12V16V and upto 100 Amps can also be supplied to work off the input voltage of 240V AC nominal 1 phase, 50 Hz supply.D. C. OUTPUTThe D.C. output is continuously adjustable from 0 to full rated value, from no load to full rated current, over the input range described. All the 3 phase units are having a low ripple of approx. 5% and as such are suitable for any kind of metal finishing.
View Complete Details
Ask Latest Price & Details
Trichloroethylene Metal Degreasing Plant

Trichloroethylene Metal Degreasing Plant

The equipment consists of heating zone, vapour zone, and condesing zone.The main tank is fabricated from m.s. Plate, and is metallized with metal zinc inside, the outside surface of heating zone, and vapour zone is insulated with insulating materials covered with m.s. Sheets.The heating zone is provided with bottom heaters to transfer the heat efficiently.A quick opening main hole is provided at the bottom lid with drain valve.The condensing zone is provided with water-cooling coils made of copper pipes with inlet. A water cooling jacket is also provided on the outside to get the efficient condensation of the vapour. A condensate collecting trough is provided to catch the condensate, and deliver the same to the water separator.
View Complete Details
Ask Latest Price & Details
ULTRASONIC 2 STAGE DEGREASERS.

ULTRASONIC 2 STAGE DEGREASERS.
This consists of two chambers such as ultrasonic chamber and vapour degreasing chambers. Degreasing solvent is poured in both the chambers and electrically heated. The temperature is arrested by thermostats. The job is loaded on basket of fixture and immersed in ultrasonic chamber for ultrasonic cleaning and then transferred to vapour degreasing chamber.
View Complete Details
Ask Latest Price & Details
SINGLE STAGE ULTRASONIC CLEANING SYSTEM

SINGLE STAGE ULTRASONIC CLEANING SYSTEM
  • MODELS EUC - 120, EUC - 300, EUC - 250, EUC - 1500 etc .
  • ULTRASONIC TANK SIZE IN INCH 6 x 6 x 6, 9 x 6 x 4, 8 x 8 x 6, 8 x 8 x 12 etc.
  • CAPCITY (LITERS) 3, 6, 9, 12, 28, 37, 84, 120, 187, 212
Appropriate liquid is poured in the tank for removing specific contamination. Heating if desired also incorporated. The job is loaded on jigs. Fixtures, Wire, Baskets or any other convenient method and immersed in tank for prescribed time. Single stage Ultrasonic Cleaning system is useful with Neutral or Alkaline liquid. Acidic solution to be used with special arrangements.
View Complete Details
Ask Latest Price & Details
BOTTOM EMPYING DRYER

BOTTOM EMPYING DRYER
This Dryer of two main M. S. Channel section supports at sides and heavy duty M.S. Angle Irons, in which the main chamber of Dryer is mounted. The Perforated Basket is rotated vertically by shaft fitted in Taper Rubber cone Bush. The Main Shaft is rotated by V. Belt driven by vertically mounted Electric Motor. The Articles to be dried are to be fed in the Basket by opening the Lid provided on the top of Container and dried articles are emptied from the bottom by merely pressing the handle lever provided on the top of the Machine.
View Complete Details
Ask Latest Price & Details
chiller unit

Chiller Unit

Since this process works best at temperature around 25 Deg. C, a Chilling arrangement of suitable capacity is recommended.
View Complete Details
Ask Latest Price & Details
Pipe Polishing Machine

Pipe Polishing Machine
For polishing of all kinds of Metallic Pipes & Rods from 10mm to 50 mm diameter. The job is fed forward by a three speed variable Cork feed wheel of 184mm dia x 76 mm which rotates the job at correct speed. The feed wheel has a hp Motor. The larger contact wheel is of 304mm dia, 76mm width and 28.57 mm above. This is loaded with an Emery Belt, which serves for Polishing. The Machine is fitted with a foot pedal for releasing the job from Polishing.
View Complete Details
Ask Latest Price & Details
vibratory polishing machine

Vibratory Polishing Machine
This consists of a Bowl or Tank shaped Unit to hold Polishing media (chips or balls), water & other Chemical compounds. This unit is mounted on a strong frame. The articles to be polished are vibrated at a suitable amplitude and frequency and roll over each other to achieve suitable deburring, descaling, radiusing, & finishing as required. This machine is far more effective & faster than conventional barrels. Suited for intricate & delicate components. Recommended for jewellery applications. Different sizes available.
View Complete Details
Ask Latest Price & Details
SINGLE CHAMBER FILTER UNIT

SINGLE CHAMBER FILTER UNIT
These are highly efficient and robust Filter Units, suitable for most general plating solution with the exception of CHROME. The Unit consists normally of a Motor driven polypropylene pump with a mechanical seal or a Magnetic Drive Sealless pump, connected to a Filter chamber made of Polypropylene or M.S. lined with PPGL and containing a Filter Stack. The Filter Stack comprises a S.S. 316 or P.P. central pipe, a set of P.P. Filter Discs with Filter Cloth and Filter paper. The Filter Stack is easily removable from the chamber and needs to be cleaned regularly. A pressure gauge is provided, which indicates when the stack requires cleaning. The whole unit (excepting mini unit) is mounted on a trolley for easy movement. The unit is suitable for acid and alkaline solutions having temperature upto 70 degree centigrade. Activated carbon or Filter aids can be used in these Filter Units. The filter unit is provided with Suction and Delivery hoses.
View Complete Details
Ask Latest Price & Details
Turbine Blower

Turbine Blower
  • Feature Silencer ensures low noise, Practically nil maintenance cost etc.
These blowers consist of a dynamically balanced impeller, which revolves in as stator-cum compression chamber having very fine clearances between them. The impeller is fitted directly on to the motor. Both the suction and pressure openings are located on the outer periphery of the stator to reduce impedence to the air flow thereby developing vacuum and pressure.
View Complete Details
Ask Latest Price & Details
PLATING RACKS

PLATING RACKS
When large volume of production is required, it is convenient to use Plating Racks or Jigs. These jigs are made from copper or Brass and the contacts are made from Spring Steel or Phosphor Bronze. The Unit is then coated with an Acid Alkali resistant Plastisol or PVC Coating. Jigs can even be made from S. S. and Titanium for specific applications. Jigs have to designed in accordance with the shape & size of component, Tank Size, production desired, and Current Distribution. We undertake designing & fabrication of Jigs for both Manual and Auto Matic Plants.
View Complete Details
Ask Latest Price & Details
TOP OPENING DRYERS

TOP OPENING DRYERS
These dryers are of solid construction with a strong & heavy base of Casting. The Body is of sheet metal. The Flywheel and the Perforated Basket are balanced to reduce vibrations. Heating is provided with Elements, which can be easily replaced. The lid is interlocked with the Foot Pedal, which cuts off power supply to the Motor & Heaters.
View Complete Details
Ask Latest Price & Details
WATER WASHED AIR AGITATION

WATER WASHED AIR AGITATION
  • Cu.ft.min. 9.5, 19, 69, 104
  • Motor H.P. 1, 2, 5, 7.5
  • RPM 280, 1400
This is a rotary air unit, complete with air vessel, fitted with safety valve and water level indicator. It provides clean, water washed air for agitation and does not require oil for lubrication. It is kept cool and lubricated by the circulation of water. On account of this, danger of contamination of plating solution with atomised oil of air is avoided. The air receiver vessel is hot dip galvanised to resist against rusting.
View Complete Details
Ask Latest Price & Details
CARTRIDGE TYPE FILTER UNIT

CARTRIDGE TYPE FILTER UNIT
  • CAPACITY 900/450, 1800/900, 3000/ 1500
  • CARTRIDGES 1, 1 OR 2, 2 OR 4
These units comprise a Filter chamber made of polypropylene, and a Magnetic drive Sealless Pump. The chamber is fitted with cartridge type Filter elements. The size of chamber and the number of cartridges as also the pump used depends on capacity desired. The following are normal ranges available.
View Complete Details
Ask Latest Price & Details
temperature controller

Temperature Controller
These are Units with Digital Temperature Indicator cum Controller. They are mounted in a Acid Alkali resistant PVC Polypropylene Body with suitable gasket to prevent fumes inflow into the body. The Units are complete with a PT 100 type Sensor which can be installed in the Plating Vat using Titanium or Glass Tubing. The Units are easy to install and maintain.
View Complete Details
Ask Latest Price & Details
Digital Ph Meter

Digital Ph Meter
Digital pH Meter is a simple direct Indication Instrument, which measures pH. pH is an important measurement in Electroplating We offer:Laboratory pH Meter:-This is Table Top model with pH Electrode, Stand etc and 3.12 Digit Display. Resolution is 0.01. Portable pH Meter:-This is a pocket model with 0.1 Resolution and lower accuracy, but with convenient handling as it has built in electrode. Measurement is possible in process itself.
View Complete Details
Ask Latest Price & Details
POLYPROPYLENE / PVC Tanks

POLYPROPYLENE / PVC Tanks
We can fabricate Tanks from Polypropylene & PVC according to your desired size. These tanks would be provided with suitable reinforcement along the sides to prevent bulging. Common usage of Polypropylene PVC Tanks is Pickling, Silver & Gold plating, Electroless Nickel etc. Polypropylene Tanks are also good for smaller capacity Modular Systems such as Electrophoretic Lacquering.These Tanks can also be offered with higher thickness and with M. S. Frame for Nickel, Acid Copper.
View Complete Details
Ask Latest Price & Details
DIAPHRAGM BLOWER UNITS

DIAPHRAGM BLOWER UNITS

These are portable Mini Diaphragm Compressor. They provide oil free air with built-in Micro Air Filter. Noise volume is low and hence they are suitable for small Plating Plants and Laboratory etc. Capacity 1.75 CFM & 50 Psi in single Diaphragm Die and 2.8 CFM & 50 Psi in double Diaphragm Die.
View Complete Details
Ask Latest Price & Details
SULPHATE ESTIMATION KIT

SULPHATE ESTIMATION KIT

The presence of an acid radical such as sulphates in a Chromium Solution is a basic requirement, which makes deposition of Chromium possible. Sulphates act only as a Catalyst and are not consumed in the reaction. However, a loss is encountered due to drag out of solution, and throwing power is critically affected. The Sulphate estimation kit provides the quickest and simplest method for estimation and control of Sulphates with accurate results. The kit is easy to operate. Directions are easy to follow. Solutions are clearly indicated. The Kit, as illustrated, is complete with: Electric Centrifuge with 4 places 50-ml. Head and metal shields. 4 glass centrifuge tubes, graduated in ozgal. 2 pipette each of 5 ml. and 20ml. Capacity with pipette bulb. 1 bottle each of solution A & B 500 ml. Cleaning wire and test tube brush.
View Complete Details
Ask Latest Price & Details
Digital Ampere Hour Meter

Digital Ampere Hour Meter
  • Feature Totalising facility with two displays, one for job count another for total count can also be provided.
Digital type Ampere-hour meter is for electroplating battery forming, battery charging, chemical industries, R& D Laboratories. The main advantages area)Efficiency of plating batch can be computed.b)Savings in expensive electrolyte, anode and energy.c)Exact control of plating thicknessd)Improved and consistent quality of platinge)Simplification of job-work costing.f)Very quick payback. The Unit has facility to select either AMPERE-HOUR or AMPERE-MINUTE mode of operation, which enables user to obtain high resolution in low current applications. Input 230 V AC 6 Watts, 4 to 6 digit LED display. Available with or without PRESET programming facility through 4 to 6 digit thumb-wheel on front panel. Audio or Visual alarm can also be provided. Accuracy: Better than 1% Battery Back Up: Single 9V dry cell for storing count in the event of power failure.
View Complete Details
Ask Latest Price & Details
METAL TANKS PLAIN

METAL TANKS PLAIN

We offer complete range of double welded metal tanks of any capacity. These tanks are suitable for Electroplating, Anodising, Phosphating, Electropolishing, Picking and other Processes. These tanks can be fabricated from M.S. or Stainless Steel. They are painted externally with acid & alkali resistant Epoxy Paint. We also offer lined Metal Tanks to suit your Application. Lining of semi hard Rubber, Lead, Antimonial Lead, Polypropylene, PVC, PPGL, etc can be done internally for various applications such as Nickel, Chrome, Sulphuric Acid, etc. Fiberglass lining can be done internally & externally.
View Complete Details
Ask Latest Price & Details
Curing Oven

Curing Oven
After blow-drying the coated pieces are required to be cured in an air circulatory oven. The articles are required to be cured at 160 Deg. C for 20 minutes. The pieces may be either loaded on the Trolleys for convenient handling or loaded in the Oven in any suitable manner.
View Complete Details
Ask Latest Price & Details
HOT AIR BLOWER UNIT

HOT AIR BLOWER UNIT

After the coating is completed on the pieces, they are required to be blow dried, which ensures removal of excess drops of Lacquer as well as increases the temperature of the articles before they are taken for Oven curing.
View Complete Details
Ask Latest Price & Details
Titanium Coils

Titanium Coils
Titanium coils are normally made from 1 O.D. Titanium Pipe. It can be supplied in various Shapes as per customer requirement. Typical Applications are as a Cooling Coil in Acid Zinc, Acid Copper and also Hard Chrome Baths.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.