Other Products / Services #1685010

V-Lock Scaffolding is commonly used throughout Australia and New Zealand due to its safety, reliability, flexibility and easy to use modular system. As space around the city centers tightens and the boom in the mining industry continues scaffolding is rising in popularity to get a job at height completed quickly and safely. Builders working on large and small projects find it the V-Lock scaffolding system easy to set up and assemble and just as easy to take down again. Leaving them more time to move on to the next job and start a new building project. V-Lock scaffolding can be used wherever regular scaffold is used. The patented V-Lock modular system can be built to any height using a strong and safe interlocking system. There are easy parts and useful accessories such as planks and safety steps to keep you and your workers safe when on site. From government buildings and projects, commercial and business buildings as well as smaller domestic jobs V-Lock can certainly help any builder on any project to work faster, smarter, more efficiently and above all safely.

For the connecting the access brackets along the length of the platform This ensure correct spacing so that the steel plank are not dislodged

Ring lock system is connection consists of standards with rosettes every 0.5mm And horizontal members with a cast end captive wedge (horizontal / Transom) When connected together the ledger ends and rosettes create a very stronger Connection .it is this connection the transmits force throughout the scaffold structures The ring lock rosette has been manufactured to have 8 holes, 4 of which are small And 4 are large. The smaller holes represent the 90 degree angle at which Horizontal And transom are fitted. the large hole accommodate the diagonal bay brace and horizontal at variable angles The rosette also allows for the horizontal to be connected into the large holes which gives Up to 15 degree of move ability

Fixed to the inner and outer standard and placed over the first Ledger of an adjacent 90 bay seating on one side for 3or 5 numbers Of steel or plank giving the same level decking on both scaffold nuns

The standard is the vertical member of the scaffold with a spigot (either round or box type) At one end for accurate alignments. A series of V locating lugs are welded on the tube for the attachment of ledger, transoms And auxiliary components Open ended standards and loose spigot are also available

Made from 48.3 OD tested steel & are available to suit any propping or access application economically, The vertical post can be used for support or access as required , The connection point is set at every 500mm interval for maximum versatility in use The lower cups (Pressed EN Steel 29x4.0mm )& movable Top Cup (Forged Type ) are retained by a fix stop pin , The verticals are punched for spigot joint a bolt can be used to restrain upward forces if required - FINISH - Painted , Powder Coated, Galvanised

Transom is either made of back to back angular or T shaped profile with The same fixing device on each end as the ledger. They are used to carry 3 or 5 number of steel planks wooden battens and toe board

Made from tested malleable cast iron and inner threads are 17mm ACME 4 TPI suitable to use with 17mm Tie Rods .

Metal Boards are made of pre galvanised tested steel 1.8mm THK and having width 225mm and 50mm High , boards are made anti skid surface to avoid any slip while working

The ledger is used to connect standard in a longitudinal direction .it is made from Scaffold tube with wedge fixing at each end which fits in the V locating lugs on the Standard. The ledger is also used as a guardrail

The base collar is the beginning vertical member of the ring lock scaffolding system. Its sits upon a fixed or adjustable base

Made from EN Grade steel inner dia 15mm & outer Dia 17mm cold rolled with 10mm Pitch ACME Threads Adm Load 85Kn Load at Yield Point- 149Kn Breaking Load- 170 Kn

Made from tested solid steel , 100mm Long inner threading 17mm ACME duly electro galvanised finish , Tested at 120 Kn Slip Load, suitable to connect two tie rods . weight 450Gms

The truss ledger has been designed to enable higher service loads to be applied to the scaffold Than could be applied to regular ledger. The reinforcing tube and stiffener plates supports the Top tube and provide strength while maintaining lightness

Diagonal bracing are used for the lateral bracing of ring lock scaffolding . Diagonal brace can also be used as obtuse angle mid rail and top or hand Guard rails in conjunction with stair system

Metal plank are side by side to form the working platform. The number Of metal plank used determines the width of the platform they span the Ledger of the hook on to the supporting ledger/transom there is an antilock System to prevent uplift in adverse condition

The base jack is used as a staring base for a scaffold. It is adjustable in height To allow for compensation on uneven surface so that level scaffold is always attainable

The ring lock transom fits vertically between two ledgers positioned 0.5m apart and attached With half coupler. When positioned at mid or third points between two ledger the maximum Point load capacity is increased

Swivel brace are used for the lateral bracing modular scaffolding Swivel brace can also be used as obtuse angle mid rail and top or hand Guard rails in conjunction with stair system .swivel brace give more Versatility to attach the brace to any location on the vertical member Of the scaffold

Straight ladder are designed to attached to the inside or outside of scaffold Tower providing safe access to the various deck levels

Made from 60mm outer diax 3.2mm Thk Tested steel & inner Tube 48.3OD x3.2mm Thk Prop sleeve 60mm OD x4.0mm Thk x250mm long duly welded with outer tube , with light duty nut with 15 mm Handel & locking pin G-Type with prop , welded base plates at both ends size 150x150x6, 0mm 0mm FINISH : Painted, Powder coated, Galvanised,

Made from tested steel and with movable wing nut duly inner threaded 17mm ACME suitable for tie rods with Electro galvanised finish Slip Test Pass at 120 Kn weight 1.15Kg

Made for Tested EN Grade steel with duly fitted 22mm wing nut , Load tested 200 KN , weight 3.2Kg

KwikStage Base Jacks are inserted into the ends of KwikStage Standards to provide the required vertical height adjustment.

EMD FORGED FIX CLAMP-Made from EN Grade tested steel & produced by hot forged technology all the couplers duly clean from burr & flushes before final assembly , EMD clamps are having boron steel hardened tempered steel hardware to make their threads more stronger & re usable up to long time all the couplers tested as per BS EN 12811-1 Class B

Fittings and Finishes

Duly white Electro Galvanized suitable for 48.3 OD Scaffolding Tube

Test Certificates

1- Load Test2- Slip Test3- Distortion Test4- Zinc Coating test

Double Push Pull props used to support the formwork panels and is fitted at the back face of the steel panel. It consist of an outer & inner pipe, sleeve, two nuts, locking pin with 3 direction movable base adaptor FINISH - Painted, Powder coated, Galvanized .

Single push pull prop are manufactured with seamless /ERW heavy duty tubing YST-310 with 2 screw rods 38mm ODx950mm long duly fixed at both ends& freely adjustable range 650mm and swivel heads plates at both ends .

Made from tested EN Grade steel with outer dia 60.1mm x3.2mm THK, duly threaded rolled Type overall length 250mm300mm350mm, with forged type heavy duty nut & 16mm Handel

Made from 48.3OD x3.2mm thk Tube & are available in a range of standard sizes or can be made to a special length if required, The forged blade(Hot Forged EN Grade)ends fits in the cup of vertical, The simple robust design ensure that horizontal no need maintenance

Bracings are made of 48.3mm od x3.2mm thk tubing and provides the face tie with cup lock access scaffolds each brace having swivel blades at end to allow easy location in the node point

Made from Tested EN Grade tubing OD 48.3mmx3.2mm THK and suitable for use out side of struture and can use for two or three board support.

Made from 60mm outer diax 1.8-2.0mm Thk Tested steel & inner Tube 48.3OD x1.8-2.0mm Thk Prop sleeve 60mm OD x3.0mm Thk x250mm long duly welded with outer tube , with light duty nut with 10mm Handel & locking pin G-Type with prop , welded base plates at both ends size 120x120x4, 0mm FINISH :

Horizontal are the member of Ring lock scaffolding .They provide horizontal support for load and planks ledger can also used as mid rail and top or hand guard rails

Made From 48.3ODx3.2mm tube with welded one side ledger blade & other side U device can use where a further scaffold run is required at 90 degree to the main scaffold, they are connected to a standard by the cup festering & simple hook over the ledger on the next run standard.

Made from 60mm outer diax 3.0mm Thk Tested steel & inner Tube 48.3OD x2.8mm Thk Prop sleeve 60mm OD x3.2mm Thk x250mm long duly welded with outer tube , with light duty nut with 12mm Handel & locking pin G-Type with prop , welded base plates at both ends size 150x150x5, 0mm 0mm FINISH : Painted, Powder coated, Galvanised,

Made from 3mm Steel duly pressed bended 50mm height and fixing one side ledger blade fixing with vertical member suitable to use for one board fixing

Standard with spigot are the vertical member of Ring lock scaffolding that utilize a removable spigot. The standard provide the vertical support for scaffolding