EMCO ENGINEERING

Borivali East, Mumbai, Maharashtra

Rotary Double Cone Vacuum DryerRotating Cone With Vacuum Dryer is high precision low temperature vacuum drying. The Rotated Double Cone VacuumDryers suitable for drying the material which operates at low temperature, easily oxidized, poisonous in nature. It has high efficiency heat transfer and high speed drying which save energy. Raw materials are dried uniformly and have good quality at low temperature

Rotary Vacuum Paddle DryerTheRotaryVacuum Paddle Dryeris a high efficiency dryer, specially designed for products with high viscosity during drying phase, with high torque requirements.The principle of thePaddle vacuum dryeris its operation through a body, shaft and blades which is fully heated to maximize heat exchange with its blades rotating very close to the wall at low speed for a continuous renewal of the product in direct exchange with the wall.

Rotary Double Cone Vacuum Dryer

• Rotating Cone With Vacuum Dryer is high precision low temperature vacuum drying. The Rotated Double Cone Vacuum
• Dryers suitable for drying the material which operates at low temperature, easily oxidized, poisonous in nature. It has high efficiency heat transfer and high speed drying which save energy. Raw materials are dried uniformly and have good quality at low temperature

Special Features of Rotary Vacuum Dryer

• Reduces drying time
• Total contained process, dust control
• Efficient Loading and Discharge
• Choppers / Battles (Lump breaker) give lump free product
• Easy Openable Charging pot
• Eliminates need for re-crying of lumps
• Handing and exposure offal products avoided
• Easy to clean internal surface, thus ensuring purity of product

Dimensions and capacities are approximate and subject to change. Do not use for installation, consult us :

• Operating capacity s 65% of total volume
• Standard jacket s
• Horsepower Is based on bulk density of 50 lbs/ft3 and natural angle response of 45D
• Rotational speed can be changed based on product characteristics.

Standard Drive :

• A = gear & pinion
• B = chain & sprockets
• C = hollow bore (optional on most models)

Rotary Vacuum Paddle DryerTheRotaryVacuum Paddle Dryeris a high efficiency dryer, specially designed for products with high viscosity during drying phase, with high torque requirements.The principle of thePaddle vacuum dryeris its operation through a body, shaft and blades which is fully heated to maximize heat exchange with its blades rotating very close to the wall at low speed for a continuous renewal of the product in direct exchange with the wall.

TheRotaryVacuum Paddle Dryeris a high efficiency dryer, specially designed for products with high viscosity during drying phase, with high torque requirements.

The principle of thePaddle vacuum dryeris its operation through a body, shaft and blades which is fully heated to maximize heat exchange with its blades rotating very close to the wall at low speed for a continuous renewal of the product in direct exchange with the wall.

the filtering, washing and drying " three in one" equipment can be made from ss304, ss316l, ti, hastelloy, ptfe lined or other materials. it can replace the filtering and drying equipments at the same time (such as: vacuum filter, pressure filter, double-cone drying machine and drying box.etc.). it completes the whole process of filtering, washing, drying, solid discharging in the same equipment. it is widely applied in the industries, such as pharmaceutical, chemical engineering, agrochemical, food, etc.

filter stage : the separation of filter cake and mother liquid. the thickness of filter cake can reach 500 mm.

washing stage : further purification of filter cake, rinse and dehydration of mother liquid remained. mix the lotion and the filter cake via up and down of agitator by layers to make the filter cake slurry finally, then the filter cake can get the full wash. drying stage: dehydrating and drying the filter cake. agitator will scrape filter cake loose by layers while the sidewall; the bottom of filter plate and agitator will heat the filter cake at the same time. moreover, the vacuum inside the equipment will accelerate the evaporating speed; the entered hot nitrogen will take away the damp and accelerate the speed of desiccation.

a.stir through clockwise and anticlockwise rotation

• the agitator shaft is driven by gearbox and motor. and inverter can adjust the rotating speed.
• the rotation, up and down of the agitator are driven by hydraulic system and regulating valve controls the speed. stir up and down. up and down of the bottom is also driven by hydraulic system. the pump can be controlled by hand or by electric or by pneumatic.

main features :

• economical energy: electrical engineering power is small.
• cip and sip; sterile by steam (122)
• double-line 0-rings for the seal between bottom plate and vessel, no dead angle, "gmp" designs are suitable for sterilizing and cleaning, attaining an ideal sealing effect.
• reduce the labor strength of operators, and avoid the pollution of the product, meeting "gmp"

The basic working principle of this incredible machine is the continuous circulation of hot air.In the tray dryer, moisture is removed from the solids that are placed in the tray by forced convectional heating.The moist air is removal is conducted partially but in a simultaneous fashion.

Air Tray Dryer (ATD)The basic working principle of this incredible machine is the continuous circulation of hot air.In the tray dryer, moisture is removed from the solids that are placed in the tray by forced convectional heating.The moist air is removal is conducted partially but in a simultaneous fashion. Features of Air Tray Dryer All contact parts made of SS 316 as per GMP standardAvailable in wide range models from 6 to 192 capacityDesign for uniform circulation of hot air in the drying chamberHeating cold and fan motor having electrical interlocking for the safety of heating elementsElectric/Steam/Thermic Fluid heating systemThe fresh air inlet and outlet airflow can be adjusted with damper control valve

Agitated Nutsche filter (ANF)is afiltrationtechnique used in applications such asdye, paint, andpharmaceuticalproduction[1]andwaste water treatment.[2]Safety requirements and environmental concerns due to solvent evaporation led to the development of this type of filter wherein filtration undervacuumorpressurecan be carried out in closed vessels and solids can be discharged straightaway into a dryer.

Is suitable for drying of thermal sensitive materials easily resolved, polymerized or deteriorated under higher temperature. Sterilization can be conducted prior to the drying process, during which no matter is allowed to enter the product. Static vacuum dryer eliminates the configuration damage of the drying materials, there fore widely used in pharmaceutical, chemicals and foodstuff etc, . vacuum Tray Dryer is the most commonly used batch dryer. They are box-shaped and loaded and unloaded via a door (two doors on the larger models).

Vacuum Tray Dryers are used mainly for drying of high grade, temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances, which are dried to very low residual moisture, content level. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity.

Standard models range from 4, 6, 12, 24, 48 to 96 trays.

Filter features[edit]A typical unit consists of a dished vessel with a perforated plate. The entire vessel can be kept at the desired temperature by using a limpet jacket, jacketed bottom dish and stirrer (blade and shaft) through which heat transfer media can flow. The vessel can be made completely leak-proof for vacuum or pressure service.