Post Buy Requirement
EI
Add Review

Our Products

We offer the best product range of Capacitance and Tan Delta Test Set, Eltel Digital Micro Ohmmeter, Eltel Solid Test Cell, Compensating Reactor and transformer ratio meter.

Relaying Current Transformer Analyser

  • Brand Name Eltel
  • Ratio Range 5/5 to 15, 000/5
  • Insulation Resolution 3 digits
  • Current Display Range 1 mA to 15 A
  • Current Display Accuracy 5 mA to 15 A
  • Current Display Resolution 3 digits
  • RMS Range 1 mA to 10 A
  • RMS Accuracy 5 mA to 10 A
  • RMS Resolution 3 digits
  • Voltage Display Range 1 to 10, 000 V
  • Voltage Display Accuracy + 2%, - 2% And +0.5 V, - 0.5 V
  • Hysteresis Loss Range 0 VA to 10 KVA
  • Ratio Accuracy + 0.25 %, - 0.25 % (5/5 to 3, 000/5)
  • Hysteresis Loss Resolution 1 mVA
View Complete Details

Automatic Instrument Transformer Test System

  • Phase Three Phase
  • Brand Name Eltel
  • Weight 1500 kgs
  • Capacitor Accuracy 1 Percent
  • CTs Range 5 - 3, 200 amperes
  • Capacitor Rated Voltage 33 kV
  • Capacitor Test Voltage 36 kV
View Complete Details

Capacitance And Tan Delta Test Set

  • Brand Name Eltel
  • Operating Range 50/ 60 Hz + 10%, 10%
  • Range 0 to 0.26 micro F (Bridge range)
  • Voltage Range 0 -12000 V
  • Voltage Accuracy + 1%, - 1% of reading, RMS responding
  • Voltage Resolution 1 volt
  • Current Range 0 to 2000 mA
  • Current Highest Resolution 1 micro ampere
  • Standard Capacitance 200 pF Air Capacitor with guard
  • Capacitor Max Voltage rating Upto 12 kV
View Complete Details

Eltel Digital Micro Ohmmeter

  • Brand Name Eltel
  • Weight Approximately 15 kgs
  • Measuring Current 10, 20, 50 & 100A DC continuous on all ranges
  • Resolution 0.001 micro Ohm , in 0-19.999 micro Ohm range 0.01 micro Ohm , in 0-199.99 micro Ohm range
  • Accuracy +0.3%, -0.3%, of reading, +0.2%, -0.2% of the F.S
  • Open Circuit Measuring Voltage 3 V DC
  • Input 230V +10%, -10% , 50Hz
  • Dimensions 450 mm x 230 mm x 200 mm (LxWxH)
  • Operating Temperature 0 - 50 Degree C; Ambient to 90% RH
View Complete Details

Eltel Solid Test Cell

  • Features The Eltel Solid Dielectric Test Cell is specifically designed to test electricalinsulating material in sheet form using a Capacitance and Dissipation factor bridge
  • Brand Name Eltel
  • Weight Approx. 5kgs.
  • Dimensions 160 mm x 160 mm x 85 mm (LxBxH)
  • Cell Type Three-terminal, guarded
  • Cell Gap Spacing 0.8mm to 2.5mm (recommended)
  • Electrode Diameter 100 mm
  • Cell Capacitance 70 pF at 1mm gap
  • Maximum Test Voltage 2.5 kV AC, 2.5 kV DC
  • Construction Stainless Steel Electrodes
  • Connectors 4 mm Banana Sockets
View Complete Details

Compensating Reactor

  • Brand Name Eltel
  • Power Rating 200 mA
  • Inductance 52 Henries + 5%, - 5% , 6kVA at 10kV, 50 Hz,
  • Dimensions 410mmx340mmx265mm (LxHxB)
  • Weight Appox. 40 Kgs
  • Temperature Range -10 to 50 deg C
  • Humidity Ambient to 90%, RH
View Complete Details

Transformer Ratio Meter

  • Weight 15 kgs approx
  • Power 230V , +10%, -10%, 50Hz, 20V A or 115 +10%, - 10%, 60Hz
  • Ratio Range 0.8:1 to 2022.21:1 for TRM-150 0.8:1 to 2021:1 for TRM-200
  • Accuracy Better than +0.1%, - 0.1% of ratio at 120V test voltage
  • Circuits Transformer-arm bridge
  • Test voltage 120 V and 12 V AC at 1 A isolated
  • Ratio Resolution 0.0013% for TRM-150, 0.01% for TRM-200
  • Deviation dials Ratio deviation +0.55%, - 0.55% of ratio with a resolution of 0.02
  • PhPhase angle deviation 2 ranges of +0.55 CR, - 0.55 CR and + 5.5 CR, -5.5 CR,
  • Dimensions 450mm x 230mm x 200mm (LxBxH)
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us