Eltech Engineering

Kukatpally, Hyderabad, Telangana

Commissioned Biggest Starter in India. Induction start Synchronous run Motor application. Lowest starting current possible with special models. Tailored made for every individual Motors. Starting solutions offered instead of product . 6 times less economical than SFCVFD. Individual or common starter can be offered .

We are offering soft starter. Type: fcma iron core reactor technology. Rating : proven up to 16000kw, 11kv., capable up to 20mw, 11kv. application : synchronous motors and induction motors.

FCMA type Magnetic Soft Starter offers series impedance in the motor circuit, usually constructed as a coil around laminated core of high permeability than that of air, which increases the magnetic field there by increasing the required starting impedance. Thus it reduces the starting current & torque of the motor & ensures the smooth starting.

As motor speed increases due to counter emf feedback the starter impedance decreases, so the voltage drop across the Soft Starter. This result in incremental voltage & torque of the motor. As motor reaches to full speed the built in bypass device closes to ensure the full running voltage to the motor. The operation of bypass device can be done through set value of acceleration time, current or rated speed.

Salient Features:

• Extremely rugged in construction. Suitable for extreme weather conditions like dusty and desert environment.
• No active electronic components involved.
• Starting current up to 1 P.U.
• Starting of motors with limited power.
• Built in bypass for full voltage during running.
• No external cooling required.
• Can be designed for multi motor starting.
• No harmonics generation- Zero Harmonics.
• Zero maintenance hence zero operations cost.
• CNC fabricated panel construction.
• Magnetic Flux Control technology.
• Range: 0.5 -20000 KW, 380 - 15000 V

Data Required for Designing Starting Current:

• Motor Data sheet with details of : kW, I, V, F, N, PF, Effi. etc.
• Driven equipment / Application details
• Motor current - speed curve.
• Motor thermal withstand curve.
• Motor torque - speed curve.
• Load torque - speed curve.
• Motor Rotating Inertia (GD2).
• Load Rotating Inertia (GD2).
• Motor No. of starts per hour.
• Ambient condition.
• Grid Capacity/ Minimum SCC MVA
• Transformer / Generator capacity.
• Voltage drop limitations if any.

Generally Slipring Induction Motors are used for applications which needs High Starting Torque & same is achieved by connecting additional starting resistance in the rotor circuit. The resistance needs to be reduced continuously in steps to increase the speed of the Motor so that the required torque is maintained.

Slip dependent Rotor Resistance Starter / Controller are designed with lossy core & based on Rotor frequency dependant resistance design. This provides a low starting current with automatically reducing resistance which is inversely proportional to motor speed to provide enough starting torque & accelerate the motor with driven equipment to full speed smoothly without Electrical & Mechanical jerks.

Slip dependent Rotor Resistance Starter is connected to the Rotor Terminals of the motor, so that the starting current is limited to a low value with a high starting torque. Motor acceleration is smooth, step less and jerk less, as resistance reduction is step less and automatic. After reaching motor to full speed, Rotor Starter will be out of circuit with the help of inbuilt bypass contactor and during running motor will be acting as Squirrel cage induction motor.

These starters sense zero-speed automatically and offer high value (100%) of resistance at every new start. Thus avoid motor damage.

The Rotor Starter is designed in such a way that the resistance offered by it is frequency dependent. When the motor starts from zero speed the rotor frequency equal to supply frequency and the Rotor Starter resistance is maximum.

Salient Features:

• Slip dependant Resistance provides automatic resistance variation during acceleration.
• Low Starting current.
• High starting torque.
• Built in bypass contactor.
• No moving parts & stepless cutting of Resistance.
• No maintenance.

Data Required for Designing Starting Current:

• Motor Data sheet with details of :- kW, I, V, F, N, PF, Effic, etc.
• Driven equipment / Application details.
• Motor Rotor Voltage (RV) & Rotor Current (RA).
• Motor thermal withstand curve.
• Motor current - speed curve.
• Motor torque - speed curve.
• Load torque - speed curve.
• Motor Rotating Inertia (GD2).
• Load Rotating Inertia (GD2).
• Motor No. of starts per hour.
• Ambient condition.

Applications:

• Cement industry - Ball mills, Wagon unloaders, Cement mills, Conveyors etc…
• Steel industry - Ball mills, Conveyors etc…
• Mines - Crushers, Conveyors, Pumps etc…
• Sugar industry - Pumps, Fibrisors, Cutters, Levellers & applications which requires high starting torque.