Features: ThunderGuard series ESE Lightning Arrester, with unique design philosophy, adopts synthesis techniques of leader discharge, impedance to limit current, air-gap discharge etc to produce leader channel in advance, improve lightning effect,  reduce discharge voltage and change the discharge process of lightning current. Thus it broaden the lightning wave, flatten the leading wave, decrease the amplitude and enlarge the scope of protection avoiding side striking and shielding failure then finally actively suppress the damage of Ground Potential Counterattack. Therefore it is an ideal device to prevent direct lightning.   PRODUCT STRUCTURE: Central bar Reflector Trigger gear Exciter Dead plate of exciter Trigger gear, reflector and central bar all are insulating Reflector and central bar show good electrical connection to the earth The base of exciter is made up of synthetic resin thus applicable to any corrosion environment ADVANTAGES:                                                      Non-electronic type, long using life Able to guarantee the electrical continuity and sustainability of function after repeated lightning strike Different type of radius of protection are for users’ selection Non electrical system will not be damaged by surge impact RANGE OF APPLICATIONS High-rise buildings Top of independent metal bar Wireless communication base station Warehouse of inflammable and explosive materials Chemicals, radar station, oil deport, observatory, military base, mine field etc Only self activate during lightning strike and initiatively intervene the lightning protection system Good looking appearance, safe and reliable, no need of protection for lightning protection system, an art and decoration for buildings with function of defending direct lightning TECHNICAL PARAMETER: Max discharge current                              ≥400KA Strength of wind resistence                    ≤40m/s Weight                                                         3.9kg Total height                                                663 mm Material Imported                                    SUS304 Installing environment                           High-rise buildings and top of independent metal bar INSTALLATION AND MAINTANANCE: Electrowelding the bottom of lightning rod and the increased mast of lightning rod (seamless steel tube and galvanized steel pipe); or connect with flange plate for special rod.

TEK1000 is a Solid Copper Air Terminal  Lightning protection device of 300mm long, 25 mm dia with connecting feature of 25 x 3 mm down conductor internally assembled with 100 mm Spherical gap Copper ball with 4 nos of flash protection spikes (10 mm dia 100 mm long). Teksai TEK1000 lightning arresters working on a simple principle of Benjamin franklin which states lightning charges nature of finding easiest path to earth from a nearest sharpest conductor from cloud clubbed with air gap balls which gathers charges from connected earth making lightning attraction more effective. One entire system of TEK1000 can protect a built-up area of 3500 Sq feet. TEK1000 is fixed with 300 mm long isolated fiberglass-reinforced plastic (FRP) mast. The Isolated Down conductor internally connects to the air terminal inside the FRP, 3 Meter GI mast and Base Setting used for top area setting, downconductor 25×3 GI Strip used with insulation which connects to chemical earthing which will be used for internal. FEATURES Provides air terminal fitted to an isolated fiberglass-reinforced plastic (FRP) mast. Our Specially designed Masts offer natural isolation properties, high strength for windy sites and low weight to minimize mast loading. Features lower-cost and Best Results at the typical shorter installation requirements. Maintenance free chemical earthing used for installation. Complies with EN 50164-1 and EN 50164-2. Approved By Central Power research institute-Bangalore (Govt. of India Lab). 5 Yrs Replacement warranty and 15 Yrs Service warranty

TerraStat ®  – Features Provides enhanced performance over traditionallightning protection Patented Technology High-grade stainless steel construction Low wind loading UL listed and recommended as per API 2003 Independently tested Meets or exceeds UL 96A, NFPA 780, and IEC 62305 standards. Lightweight and easy to install Corrosion resistant Large selection of mounting hardware Is available in custom systems designed and  manufactured by ALLTEC to fit your needs.

            TEK S O-TUBE  Pipe in Pipe electrodes are designed using high-grade metal alloys and composition of several organic chemicals in adherence with international quality norms. Offered electrodes undergo stringent quality testing with our in-house testing facilities pertaining to company periodical. Available in varied designs, patterns and specifications; our electrodes are handy in protecting the human beings from collapsing in case of leakage current. Features of Chemical Earthing Electrodes: Easy installation Trouble free operations High conductivity Low thermal insulation Ability to withstand extreme temperature Application Area Data Processing Centers Food Processing & Water Treatment Plants Industries Residences Substation and Power Generating Station Telecommunication Towers TEK S O-TUBE  is a high conductive pipe in pipe which is 2-3 inch diameter wide,  providing a larger surface area for a better connection to the earth and filled with Electrolytic moisture creating material and easy to refill. An efficient grounding system is critical to personnel safety and uninterrupted operations. But conventional ground rods are typically insufficient for industrial uses where target resistance can be less than 1 ohm. The  TEK S O-TUBE  uses high sensitive electronic equipment to achieve a constant and low-impedance electrical path to the earth, even changing the soil conditions. Large surface area: The wider 2-3 inch diameter provides a larger surface area for a better connection to the earth. Electrolytic Material:  In the presence of moisture, these materials dissolve and seep out of leach holes along the electrode. The electrolytic material continually increases the soil’s conductivity, further reducing impedance and resistance. Soil augmentation:   TEK S O-TUBE   Contains a combination of materials which optimize the conductivity of the soil , increases moisture retention and corrosion reducing elements, so that a total enhancement happens which increases the system efficiency. Easy refills:  Every  TEK S O-TUBE  comes with a standard removable cap and access cover for easy maintenance of the ground electrolytic material to be refilled. Test Joint:  The test joint of this pipe is one foot long stranded tape exothermically welded to the body. Our Products have four times more surface area than a traditional ground rod. This larger surface area helps create the low-impedance connection required to safely channel high-frequency lightning currents to earth. We can reduce these risks more effectively than other ground rods by providing the most efficient earth interface. In addition, it meets or exceeds relevant design codes and safety standards for protection of personnel, property, and sensitive equipment.

TEK S O-RODS  Copper Bonded Rod outer conductor layer is low-impedance copper and the center is higher impedance steel; the effect given by  TEK S O-RODS  is greater than that given by ordinary copper conductors permitting greater span lengths than with copper due to the inseparable union of the two metals.   It deters theft since copper recovery is impractical and thus has very little scrap value. Installations with  TEK S O-RODS generally recognized as fulfilling the required specifications for a good ground. For this reason it is used with preference by utilities, oil and Gas companies when cost is a concern. TEK S O-RODS  Copper Bonded Rod is making for spatially long lasting maintenance free earthing system and corrosion resistance while providing the lowest resistance to ground. Preventing exposure of the steel core to soil and moisture, the  TEK S O-RODS Copper Bonded Rod is suitably treated to prevent oxidation. TEK S O-RODS  (Copper Cladded Steel Rod) are available as per UL standard 8 Ft & 10 Ft length suitable for all soil condition. The electrode is 5/8 or 3/4 dia MS Rod with 250 micron of copper cladding which is tested & certified in our laboratory. The electrode cab be used standalone or Delta connection or as part of any multiple electrode system. Recommend Tri-Pod connection for better ohmic value (less than 1 Ohm) and 20 years life in all soil condition, even if area is Rock or sandy.

AC Power Supply SPD Module ●A class Surge Protective Device for AC Power System. ●Sensitive electronic equipment ●Telecom centers ●Automatic control centers ●Intelligent buildings ●Industrial enterprises ●Medical institutes FEATURES: ●DIN rail mounting for easy installation ●Plug connectors for quick and easy  connection or rewiring ●50kA lightning impulse current Iimp ●Thermal disconnect device ●Status indicators visually verify protection level