ELPRO ENERGY DIMENSIONS PVT LTD

Sunkadakatte, Bangalore, Karnataka

A lighting audit is an investigative process that measures conditions against standards to determine where cost-effective changes can be made The first step is a walk-through of the plant to observe the quantity and quality of available light. Problems are noted such as an area where lighting levels are too high, where lights are left on unnecessarily, or where factors leading to visual discomfort may inhibit productivity or safety. The type, quantity, location and height of lamps and fixtures are recorded. Detailed measurements of illumination levels are taken with a lightmeter, both at task areas and for general overall lighting Next, simple retrofit possibilities, such as switching from general lighting to task lighting are considered. After all the simple retrofit options are examined, a plan for the general modification of the plant lighting is devised. Such a plan integrates simple modifications and major improvements into a cohesive, energy efficient system.

Modern power systems are highly complex, and to ensure reliable performance, require consideration of all issues, probable problems and their causes, and potential solutions. Our over a decade of experience in power and distribution system studies, and our extensive track record in working with customers and their power providers to identify and solve power system problems, makes us the people to call. The PQ Audit can address all aspects of power quality. lt focuses on common issues such as harmonic distortion, low voltage, voltage sags, wiring and grounding, and poor power factor. By using the PQ Audit, you can identify potential problems, plan and take corrective measures, and prevent facility downtime, saving both time and money.

 

The PQ Audit assesses these problems :

• Equipment Failure
• Poor Power Factor
• Drives tripping off-line
• Transformer overheating
• Harmonic resonance/high distortion
• Unexplained breaker operations
• Misoperation due to utility faults
• Motor Failures due to harmonics

 

Gost Savings For You!! : Power quality investigations focus on the cost impact of power problems. These can include. Facility or equipment downtime Scrapping of products and raw materials Process or equipment restart Repair or replacement of damaged machines and equipment Operating at less than optimal efficiency increased utility demand charges Each problem can generate a number of these costs. Predicting the exact cost is difficult, but poor power quality and poor power system performance can cause sufficient losses to justify fixing the problem.

Water use audits are an important first step toward understanding both a facilitys water use and what can be done to reduce it. We trace water use from its point of entry into the facility through its discharge into the sewer. We identify each point of water use within and around the facility and estimate the quantity of water used at each of these points. We identify and quantify unaccountable water losses and possible leaks. We provide facility executives with a road map of potential savings, as well as implementation costs. In addition to water quantity, we also take into consideration water quality. Some of the largest potential savings that can be achieved is through the recycling of water or the use of rain water. Water audits can help identify potential uses for alternative sources of water. A comprehensive water use audit will examine all of the major areas in which a facility uses water, including sanitation, maintenance, mechanical systems, building processes and irrigation. For each of those areas the water use audit will provide a breakdown of the how, when and where of water use.

This is where a comprehensive energy audit helps. We perform an in-depth analysis of your energy consumption and show you how to drastically cut your energy bills. Savings are significant; and almost everyone can save upto 20 o/o or more. We start by analyzing your utility bills for the previous year to find usage trends. We then visit your facility to gather the data we need, to do an in-depth analysis of your energy consumption. We begin our analysis once we have gathered all the pertinent information. We look at all areas of potential savings. We use ourdecades of experience and find the areas of improvement that will give you the most bang for your buck. Many will cost you essentially nothing. Others will have a pay back within a couple of years. We tend to steer you away from costly projects towards more practical solutions. All our findings and recommendations are gathered into a detailed report. We give you an executive over view, showing you how to save money at a glance. We then back it up with detailed explanations and documentation. We then work with you to implement the project and achieve the savings. ln case you do not have the CapEx to invest, Elpro Energy will also invest in the project and recover its investment from the energy savings all the while giving you also a share of the savings. You walk, away with the keys to cutting your energy bill and giving yourself a competitive edge. We call this CHANGE THE RAPY at Elpro.

Thermography Audit : The goal of every electrical infrared (thermal) inspection is to survey designated electrical equipment in order to pinpoint defective components and elevated temperatures within your power distribution system. lf unfound or untreated these thermal "hot spots" can cause- potential fire, explosion, or electrical service interruption threats. Thermal hot spots are typically caused by unbalanced or overloaded electrical circuits, loose connections, or broken equipment. These conditions are often overlooked during routine evaluations of facilities and can result in the release of heat that will be visible only through infrared thermography detection services.

 

Benefits :

• Mai tai on the integrity of your facility's electrical system
• Reduces electrical fire hazards
• Provide uninterrupted power to tenants/ clients employees
• Detect faulty connections/overloaded circu its
• Provide a snap shot in time of the condition of your mechanical systems, motors, bearings, etc.

 

Preventative or predictive maintenance programs save money by reducing :

• Premature equipment failure
• Emergency overtime
• Overnight shipment of part

 

Insurance premiums : (many insurance companies give discounts for performing regular infrared inspections) loss of revenue due to downtime

Electrical Safety Audit (ESA) is a systematic procedure to evaluate potential hazards in the electrical energy system of a facility, and to recommend measures to minimize / prevent such hazards. Electrical Hazards could result in loss of property, production, loss of life, injuries to personnel working etc. ESA is an independent review to verify conformance with established standards to identify, assess and control electrical risks. ESA is carried out by way of physical examination, sample tests, review of records and discussions with various plant personnel operating the electrical equipment. Every industry has to perceive seriously the safety audit especially ESA as most of the fatalities in factories are due to accidents caused by electricity. lnternational and national fire safety organizations have observed that one fourth of fires are caused by electrical faults in most of the industries. Electrical faults could be anything like short circuit, overloading or loose electrical joints leading to sparking. ln the course of the ESA observations will be made and data collected. Based on the analysis, hazards will be classified if the flaw is due to Design, Maintenance, Lack of training, Facilities & Procedures being improper or due to sheer negligence of management committee. Though ESA comes under general Safety Audit, comprehensive ESA is to be carried out regularly to provide a thorough review of the Electrical System, which will in turn identify impending electrical hazards and defects in the system. An effective ESA program includes a proficient audit team visiting the plant and having a thorough discussion with safety and electrical officers, data collection and reviewing the relevant information such as accident reports, history cards, Electrical lnspectors' Report and preventive maintenance program. Subsequently a consolidated report is submitted to the management for review and implementation. Work Progess/sgope To Carry Out "Hot Spot Analysis" Of Electrical