Our Products
Paper Cutting Machine
2 Products availableBoring Machine
2 Products availableWe offer a complete product range of Electric Angle Grinder, 40mm Pillar Drill Machine, Radial Drilling Machine, 20mm Pillar Drill Machine and Hand Drilling Machine
Technical Specification
Drilling Capacity ( in steel) | 1 | 1.1/4 | 1.1/2 | 1.1/2 |
---|---|---|---|---|
Max. Dist. From spindle center to column | 21 | 30 | 30 | 36 |
Min. Dist. From spindle center to column | 9 | 11 | 11 | 12 |
Vertical travel of arm | 27 | 33 | 36 | 36 |
Spindle travel | 5 | 6 | 7 | 7 |
Range of spindle speeds | 280-940 | 235-730 | 88-2600 | 190-520 |
Power Required (R.P.M) for simple drive | 1 H.P.(960) | 2 H.P.(960) | 2 H.P.(1440) | 3H.P.(960) |
Power Required (R.P.M) for Elevating Arm | – | – | 1 H.P.(1440) | – |
Spindle Bore | M.T.No-2 | M.T.No-3 | M.T.No-4 | M.T.No-4 |
Pillar Diameter | 5 | 7 | 6.5 | 8.3/4 |
Spindle Diameter | 1.5 | 2 | 2.5 | 2.3/4 |
Work Table | 8*8*9 | 9*9*8 | 14*12*12 | 15*15*12 |
Working Surface of base | 18*19 | 20*25 | 32*24 | 31*21 |
Floor Space Required | 24*37 | 44*25 | 51*30 | 54*27 |
Approximate Weight | 450 Kgs. | 700 Kgs. | 850 Kgs. | 1600 Kgs. |
Technical Specification
DRILLING CAPACITY IN SOLID MILD STEEL | MM | 40 | 40 | 50 | 50 | 65 | 75 |
---|---|---|---|---|---|---|---|
DRILLING CAPACITY IN CAST IRON | MM | 50 | 50 | 60 | 60 | 75 | 85 |
DIA OF COLUMN | MM | 230 | 255 | 310 | 310 | 355 | 405 |
DRILLING RADIUS MINIMUM | MM | 550 | 375 | 450 | 425 | 650 | 675 |
DRILLING RADIUS MAXIMUM | MM | 1050 | 950 | 1100 | 1325 | 1600 | 1950 |
MACHINE HEIGHT FROM FLOOR | MM | 2420 | 2420 | 2760 | 2760 | 3170 | 3320 |
DISTANCE FROM SPINDLE NOSE TO TOP OF THE BASE PLATE MINIMUM SPINDLE IN DOWNWARD POSITION | MM | 50 | 100 | 100 | 100 | 100 | 100 |
DISTANCE FROM SPINDLE NOSE TO TOP OF THE BASE PLATE MINIMUM SPINDLE IN UPWARD POSITION | MM | 1000 | 1150 | 1300 | 1300 | 1600 | 1750 |
DRILLING DEPTH | MM | 180 | 180 | 225 | 225 | 325 | 325 |
WORKING SURFACE OF BASE PLATE | MM | 885*545 | 975*655 | 1150*655 | 1460*845 | 1735*940 | |
DIMENSIONS OF BASE | MM | 1470*705*180 | - | - | - | - | |
NO OF SPINDLE SPEEDS & RANGE (RPM, Xsteps) | 45-660*6 Steps | 40-790*9 Steps | - | - | |||
NO OF SPINDLE FEEDS & RANGE (Per Rev. Xsteps) | 0.095-0.215*3 Steps | 0.080-0.180*3 Steps | 0.10-1.25*6 Steps | ||||
TAPER SPIDLE NOSE SOCKET | MT | 4 | 4 | 5 | 5 | 5 | 6 |
MAIN MOTOR | HP | 2 | 2 | 3 | 3 | 5 | 7.5 |
ELEVATING MOTOR | HP | 1 | 1 | 2 | 2 | 3 | 5 |
TOTAL WEIGHT OF MACHINE(approx) | Kg. | 1700 | 2000 | 3000 | 3200 | 4800 | 6500 |