Our Products
Road Safety & Traffic Products
2 Products availableSecurity And Inspection Devices
2 Products availableBollards
1 Products availableSafety System & Equipments
1 Products availableDoor Locks
1 Products availableWe offer a complete product range of SURFACE BARRIER, wireless system, thumb reader, ip system and analog system
Surface Barrier are those barriers which is mount on the surface of a road.there are several type of surface barrier Surface Mount Road Blocker Surface Mount Road Blocker Provides a High Level of SecurityAgainst Unauthorised vehicle access.the Surface Mount Barriers Like Road Blocker are designed to provide a High Speed Deployment for secure installation from Vichele Attack.
TECHNICAL SPECIFICATION:
Door watch is a state of the art finger print identification door lock and offers the extreme security and user convenience by adopting superior biometric technology instead of password , card, key method that is vulnerable to fraud and is hard to remember.
FEATURES :
Wireless security cameras are closed-circuit television (CCTV) cameras that transmit a video and audio signal to a wireless receiver through a radio band. Many wireless security cameras require at least one cable or wire for power; "wireless" refers to the transmission of video/audio. However, some wireless security cameras are battery-powered, making the cameras truly wireless from top to bottom.
Wireless cameras are proving very popular among modern security consumers due to their low installation costs (there is no need to run expensive video extension cables) and flexible mounting options; wireless cameras can be mounted/installed in locations previously unavailable to standard wired cameras. In addition to the ease of use and convenience of access, wireless security camera allows users to leverage broadband wireless internet to provide seamless video streaming over-internet.
Analog wireless is the transmission of audio and video signals using radio frequencies. Typically, analog wireless has a transmission range of around 300 feet (91 meters) in open space; walls, doors, and furniture will reduce this range.
Analog wireless is found in three frequencies: 900 MHz, 2.4 GHz, and 5.8 GHz. Currently, the majority of wireless security cameras operate on the 2.4 GHz frequency. Most household routers, cordless phones, video game controllers, and microwaves operate on the 2.4 GHz frequency and may cause interference with your wireless security camera. 900 MHz is known as Wi-Fi Friendly because it will not interfere with the Internet signal of your wireless network.
Multiple receivers per camera: the signal from one camera can be picked up by any receiver; you can have multiple receivers in various locations to create your wireless surveillance network
Biometric Thumb Reader is used for the attandance system.today it is used in every places like hospital, company, school, colleges etc.
BENEFITS:
Swing gates can be either single or dual leaf and can be operated manually or automated, with bi-fold options also available.
Swing gates normally require a level site across the driveway. They are also more prone to wind loadings so care should be taken in selecting the appropriate drive motor and gate infi ll. There are four swing gate types, each providing options to make gate selection an easy task.
Steel sections (RHS) used during manufacture increase in size and wall thickness through the gate types to provide different levels of security.
With heavier steel sections used in Security models it is possible to extend the clear opening to 10 metres, however it does require substantial concrete footings for post support .
We are all aware that the future of security surveillance cameras are in IP products, however analog cameras are still going strong today.Analog Camera Can Be of Many Type Like: Box Camera, Bullet Camera, UTP Camera, Fixed Dome, PTZ Camera, Thermal Imaging Camera, Positioning System.
Box Cameras provide industry leading performance, cutting edge technology and the right form factor for those applications and installations that require a box camera. Digital Signal Processor (DSP) delivers a wide selection of outstanding features across the entire product range.
Daylight, true day/night, integrated infrared and zoom models combine to deliver one of the most comprehensive bullet camera lines in the industry. For virtually every application where the features and foot print of the bullet camera are required.
Delivering outstanding performance over UTP, our UTP camera selection is a strong representation of what the market has been asking for. The UTP signal can be used with Samsung's multi-camera UTP power supply for single cable installations, but it also is compatible with NVT and Nitek products. With UTP, cameras can be located up to 3000 feet away without fear of ground loops, and the signal is transmitted via CAT-5 cable.
One of our most requested camera lines, the selection of fixed domes is comprehensive and boasts an impressive array of features and functions. From indoor to vandal resistant environmental model, we have the dome cameras you've been looking for.
With outstanding performance specifications and a robust mechanical build, the Samsung thermal camera product line was developed to deliver reliable performance when there is just not enough light for traditional imaging.
Road blocks offer maximum security for vitally sensitive areas against unauthorized entry of vehicles of all sizes and weights. Blocker is designed to disable and block vehicles traveling at speed of 40 Km/hr with gross weight of 30 tones
SPECIFICATIONS(3-6M)Features
cantilever gates is that they are only supported at one end and are designed to operate without the need for a surface mounted track across the driveway. This is normally beneficial when there are large volumes of, or heavy, vehicular traffic. They require less space than swing gates and are easier to safeguard.
Cantilever gates are subject to reduced maintenance costs, making them a more reliable option than track sliding gates.
Cantilever gates continue to be the popular choice as a safe reliable gate design. They can be installed in a number of confi gurations, using bi-parting operation with options to include central pedestrian or smaller swing access gate.
Cantilever gates can also be installed with an overhead drive option for unrestricted operation in fl ood-prone areas or for alpine regions where drive mechanisms can be affected by compacting snow.
Roads and driveway entrances can be spanned up to 10 metres allowing clearance for central kerbs and road crowns. With less rolling resistance, cantilever gates can achieve faster, open and close speeds than track gates. Speeds can be adjusted and can be 'ramped' up or down at the end of the gate travel.
Full height turnstiles integrate with other access control systems and cater for a flow of up to 20 people per minute. Controllers can be configured to provide a range of functions (entry only / exit only / entry and exit). Recommended minimum for all concrete footings, 30MPa.
FEATURES :
Hydraulic rising bollards are designed especially for high security vehicle entrances and for locations that has to be closed for motorized traffic on specific times (like private roads, controlled parking areas, industrial areas, shopping lanes, marketplaces etc). Whenever a vehicle collision occurs; bollards will destroy the front suspension system, steering linkage and other parts of the drive system so the vehicle will move only a few more meters and will be inactivated. They can be installed as a single unit as well as in groups. Bollards are driven hydraulically and the hydraulic drive unit is placed in an installation cabinet close to the bollards. In case of power failure bollards can be lowered manually. Standard unit has raised height of 60 cm but for special requirements up to 105 cm lifted height can be manufactured. With the help of plc/microprocessor controlled electronics, raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint or hand shape, radio control, on/off switch or key switch etc. Besides, safety accessories like loop detectors, photocells, flashing lights or red/green lights can be integrated to the control electronics very easily.
FEATURES
Gate Range has long been considered the industry standard. Gate applications cover a wide spectrum ranging from once-a-day operation for factories and industrial sites through to the demands of the constant operation required for access control in high security operations. Whether for light duty or high security.
DRIVE SYSTEMS:A range of various drive motors / gear boxes is available to suit the weight of the gate and the proposed application and expected usage. Drive motors can be either mains or solar powered and should include:
It is pedestrian barrier installed in conjunction with any access control system provides valuable assistance to security personnel at any monitored entrance. This is available as a single- or multiple-lane setup .Flap Barrier are compatible with most access control systems, such as magnetic, biometric and proximity readers. Its combine features like high throughput rate, user acceptance, comfort, attractive design and different levels of security to prevent unauthorized access pedestrian safety has also been taken into account.
ADVANCED DESIGN:Its design includes an elegant style appearance; a stainless steel cabinet. Flap Barriers are h PLC for rigorous logic; an advanced system of detection and tracking sensors. It is Installed along with hieroglyphic symbols both audio and visual alarms.
HIEROGLYPHIC SYMBOLS:This Flap Barrier equipped with two types of hieroglyphic symbols to inform authorization permission and access situation.
DETECTION LOGIC AND ALARMING :The standard Flap Barrier is equipped with several sets of detection cells on each side of unit. Flap Barrier has detection sensors which are positioned in manner that it detect intrusion most accurately Flap Barrier detects any intrusion, the alarming will be triggered. Flap Barrier can also have an audio and visual alarming with corresponding output.
EMERGENCY:It is a failsafe security barrier. In case of power failure the arms will open automatically. It can be integrated with a Fire alarm system or other alarming signal for emergency. It will open automatically in case of emergency
A person's hand/palm and finger are unique however not as unique as their fingerprints or irises, for this reason, businesses and schools like to use hand scanner and finger reader biometrics technology, to authenticate but not identify its users.
Authentication is a one-to-one comparison; it compares your characteristic with your stored information. Identification, on the other hand, is a one-to-many comparison. In this way, some people may find it less intrusive.
Hand scanner and finger reader recognition systems measure and analyze the overall structure, shape and proportions of the hand, e.g. length, width and thickness of hand, fingers and joints; characteristics of the skin surface such as creases and ridges.
The hand and finger scanner/reader devices still maintain accuracy even when hands are dirty, which are good in construction areas; and also have the ability to work under extreme temperatures ranging from negative 30 to 150 degrees F. To use a hand scanner, you simply place your hand on a flat surface, aligning your fingers against several pegs to ensure an accurate reading. Then, a camera takes one or more pictures of your hand and the shadow it casts.
The scanner uses this information to determine the length, width, thickness and curvature of your hand or finger, knuckle shape, distance between joints and bone structure and translucency. It translates that information into a numerical template.
BENEFITS:
