Our Products
Wire Making & Cabling Machines
2 Products availableIndustrial Machinery
2 Products availableCutting Machine
2 Products availableSheet Metal Machinery
1 Products availableIndustrial Drilling Machine
1 Products availableEarthmoving Equipment & Machines
1 Products availablePaper Work & Making Machinery
1 Products availableMachine And Precision Tools
1 Products availableLamination, Wrapping & Banding Machines
1 Products available
Operating mechanisms are to longer mounted on one common shaft but on two auziliary shafts thus eliminating long cutter leaver. The cutter slides move in substantial guides and driven directly by cranks acentric. This avoids all determental impacts of the cutter of the against each other consequently reduces cutter wear. The Crank Shaft is carried in four Bearins. The smooth ruining of the nail machine is thus ensured.
| Model | Capacity of nail | Wire Guage | Production per minute pieces | H.P. x Reqd. |
|---|---|---|---|---|
| EMT -1 | 12 to 38mm ½" to 1.5" | 18 to 14 SWG 1.2 to 2mm | 400 to 450 | 1.5 x 1440 |
| EMT -2 | 12 to 50mm ½" to 2" | 16 to 12 SWG 1.6 to 2mm | 350 to 400 | 2 x 1440 |
| EMT -3 | 20 to 80mm ¾" to 3" | 14 to 9 SWG 2 to 3.7mm | 300 to 350 | 3 x 1440 |
| EMT -4 | 25 to 100mm 1" to 4" | 12 to 8 SWG 2.6 to 4mm | 200 to 250 | 5 x 1440 |
| EMT -5 | 35 to 125mm 1.5" to 5" | 8 to 6 SWG 4 to 4.9mm | 150 to 200 | 7. 5 x 960 |
| EMT -6 | 50 to 150mm 2" to 6" | 8 to 4 SWG 4 to 6mm | 100 to 150 | 7. 5 x 960 |
| EMT -8 | 75 to 200mm 3" to 8" | 8 to 4 SWG 4 to 6mm | 100 to 120 | 10 x 960 |
This high speed single facer offer's high rate of production & enhanced efficiency . maximum speed depending on paper is 50 meter per/min
SPECIFICATIONS
| Size | O/P | H.P. | Dimensions | Heating Load | PP.WGT KG |
|---|---|---|---|---|---|
| 42" | 100 | 6.5 | 16' x 7' x 6' | 18 Kw. | 4000 |
| 52" | 100 | 9 | 16' x 8' x 6' | 27 Kw. | 4500 |
| 62" | 100 | 12 | 16' x 9' 6' | 40 Kw. | 5500 |
ELEGANT MACHINET TOOLS is a proprietary concern established in 2013. All type of General machinery & machine tools are manufactured under stringent quality control standards, and are performing successfully in various locations all over the India. Offering a wide range of Workshop Machinery 1. Corrugated board making machines 2. Box stitcher angular straight 3. Eccentric-slotter-machine 4. Four bar rotary creasing machine
3" to 4" pitch also adjustable with additional gears in winding unit whichever could be supplied only under special demand . Our major emphasis are upon its adjust ability of pars and easy maintenance. Operator has an easy approach in setting all arms, cutters by making the machine parts fool-proof. It ensures easier dismantling, assembling, loading unloading as well as consequent view over flow of formed wire. All the adjustable parts are altogether accessible and machine standards.
| BARB SPACE | WIRE GAUGE (Range) | PRODUCTION | H.P REQUIRED |
|---|---|---|---|
| 75-100mm | (12-12 ) (12-14) (14-14) | 500-600Kg | 5 * 1440 |
Manufacturing of Pillar Drill Machines & Radial Drill Machines, also Manufacturer Auto Feed Drill Machines & Tapping Machines . Very good reputation for performance of their Drilling Machines, its competitive price, timely delivery. We offers varieties of model in Radial Drill Machines & Pillar Drill Machines, Auto Feed Drill Machines & Tapping Machines. Customers have further choice for light or heavy duty in Pillar Drilling Machines.
The machine is designed compact and guaranteed reliable for superb working while in operation for special Quality Screws. Each part of the machines are standardized manufactured from the best material and hence assured for longer life. HIGH SPEED HEADER ARE ALSO AVAILABLE
| MODEL | DIA OF SHANK | LENGTH OF SHANK | PRODUCTION PER / MIN | MOTOR |
|---|---|---|---|---|
| EMH-3 | 1/8" (3MM) | 1" (25MM) | 170-190 | 2 X 1400 |
| EMH-4 | 5/32" (4MM) | 1.1/4" (30MM) | 160-180 | 2 X 1400 |
| EMH-5 | 3/16" (5MM) | 1.1/2 " (40MM) | 150-170 | 3 X 1400 |
| EMH-6 | 1/4" (6MM) | 2" (50MM) | 140-160 | 5 X 1400 |
The quick flute change capability allows the box plant greater flexibility in scheduling as well as the ability to offer the customers whatever flute profile he needs
| Size | Motor (H.P.) | Steam Req. Kg./Hr. | Wt Approx. (MT.) | Floor Space | Heating Load |
|---|---|---|---|---|---|
| 42" | 7.0 | 200 | 4.5 | 7.0' x 16' | 35 |
| 52" | 9.5 | 300 | 5.0 | 8.5' x 16' | 41 |
| 62" | 9.5 | 300 | 5.5 | 9.5' x 16' | 41 |
| 72" | 12.0 | 400 | 6.0 | 10' x 17' | 47 |
| 84" | 14.5 | 400 | 6.5 | 11' x 18' | 47 |
Three slots and one corner cutting is done simultaneously on this machine. The distance between slotting and corner cutting heads are adjustable with gear and rack mechanism provided with the machine
| Size | Motor (H.P.) | Slot Depth (Max) | Floor Space |
|---|---|---|---|
| 75" | 3.0 | 18" | 8' x 4' |
| 85" | 3.0 | 18" | 9' x 4' |
| 95" | 5.0 | 18" | 10' x 4' |
Elegant Machinery are catering four bar Rotary cutting machines that are used for creasing and cutting corrugated board. These machines are provided with creasing and cutting heads, which are adjustable. Apart from this, these machines are available with two side gauges for accuracy in cutting and creasing of boards .
| Size | Motor H.P. | Weight Appr.(KG) | Floor Space |
|---|---|---|---|
| 65" | 2.0 | 1700 | 7' x 4' |
| 75" | 2.0 | 2000 | 8' x 4' |
| 85" | 2.0 | 2200 | 9 ' x 4' |
| 95" | 3.0 | 2800 | 10' x 4' |
Heavy duty hand operated machine to cut the corrugated board
Table size - 48"62" 58" 66" 68"70"
High speed reels to sheet cutter as well as 2 ply corrugated board . making rolls on single facer .
| Size | Motor (H.P.) | Cutting leading (min/max) | Floor Space |
|---|---|---|---|
| 52" | 2.0 | 20"/100" | 6'x x8' |
| 62" | 3.0 | 20"/100" | 7' x 8' |
Hand fed sheet pasting machine is useful for gluing fluted side of board making 3, 5, 7 ply corrugated board.
| Size | Motor (H.P.) | Weight 3 Rolls | Floor Space |
|---|---|---|---|
| 75" | 0.5 | 600 | 8' x 3' |
| 85" | 0.5 | 700 | 9' x 3' |
For printing kraft paper & corrugated board distinct & precise impression , instant drying.
Available Sizes : 50"75" , 50"85" , 60"85" , 60"95" , 60"105"
Sturdy and of robust construction in the design of which simplicity has been the key note. All machines are guaranteed to cut their rated capacity in Mild Steel for the full length and to stand upto continous service at this capacity. Drive is by Vee Belts on to the flywheel pulley and then by gearing on to the main crank shaft. The machine is controlled by a paddle rod running the full length of the machine.
| Model | Shear Length in Mid Steel | Shear Capacity RPM 14401 | H.P. Required in per minute | Models Strokes in per Minute | Weight in Kgs |
|---|---|---|---|---|---|
| E.MSM - 24 | 24" | 16 SWG | 3 | 40 | 500 |
| E.MSM - 36 | 36" | 16 SWG | 3 | 40 | 700 |
| E.MSM - 40 | 40" | 16 SWG | 3 | 40 | 800 |
| E.MSM - 40 | 40" | 10 SWG | 3 | 40 | 1000 |
| E.MSM - 51 | 51" | 16 SWG | 3 | 40 | 1000 |
| E.MSM - 51 | 51" | 10 SWG | 5 | 40 | 1700 |
| E.MSM - 60 | 60" | 10 SWG | 7.5 | 35 | 2000 |
| E.MSM - 72 | 72" | 10 SWG | 7.5 | 35 | 2500 |
| E.MSM - 80 | 80" | 10 SWG | 10 | 35 | 2800 |
| E.MSM - 100 | 100" | 10 SWG | 10 | 35 | 3200 |
The company has acquired the status of the leading Manufacturer and Supplier of Treadle Shearing Machines . The Treadle Shearing Machines, offered by the company, are known for their quality and are available with the best grade accessories.
| Model No. | ETS-2 | ETS -3 | ETS -4 | ETS -5 | ETS -6 | ETS -7 | ETS -8 | ETS -9 | ETS -10 |
|---|---|---|---|---|---|---|---|---|---|
| Cutting Cap Length x Thick | 1525 x 2 | 2030 x 2 | 2540 x 2 | 3125 x 2 | 1270 x 4 | 1525 x 4 | 2030 x 4 | 2540 x 4 | 3125 x 4 |
| Depth of Throat | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Front Gauge | 900 | 900 | 900 | 900 | 750 | 750 | 750 | 750 | 750 |
| Rear Gauge | 750 | 750 | 750 | 750 | 1000 | 1000 | 1000 | 1000 | 1000 |
| Table Height | 850 | 850 | 850 | 850 | 850 | 850 | 850 | 850 | 850 |
| Table Width | 425 | 425 | 425 | 425 | 450 | 450 | 450 | 450 | 450 |
| Blade Width x Thickness | 50 x 12 | 50 x 12 | 50 x 12 | 50 x 12 | 63 x 18 | 63 x 18 | 63 x 18 | 63 x 18 | 63 x 18 |
| Stroke Per Minute | 60 | 60 | 50 | 50 | 60 | 60 | 50 | 50 | 50 |
| Machine Length | 2450 | 2900 | 3450 | 4150 | 2300 | 2500 | 3000 | 3550 | 4200 |
| Machine Width | 1450 | 1450 | 1450 | 1525 | 1525 | 1525 | 1700 | 1700 | 1850 |
| Machine Height | 1275 | 1375 | 1375 | 1400 | 1320 | 1320 | 1425 | 1425 | 1500 |
| Main Motor | 3 hp | 5 hp | 5 hp | 7.5 hp | 5 hp | 5 hp | 7.5 hp | 7.5 hp | 10 hp |
| Weight Approx. | 2050 | 2600 | 3350 | 4100 | 2350 | 2750 | 3250 | 4200 | 5300 |
We are engaged in offering a quality range of Expanded Metal Machine which is highly renowned for its robust construction, low maintenance, reliability and longer service life. This machine is designed and fabricated using high quality components and latest technology. This machine is used for punching all kinds of expand plate mesh in construction, hardware and furniture industries.
