Our Products

Our offered Product range includes digital monitoring device, programmable fault annunciator and analog monitoring device.

Maximum Demand Controller

Dimension 96 X 96 X 117 mm
Brand Name EAPL
Operating Voltage Range 170V - 270V AC/DC
Rated Frequency 50 / 60 Hz +/- 5% for AC only
Power Consumption 5 VA / 1W

View Complete Details

Ask Latest Price & Details

We are offering electronic timers. product features: din sized enclosure for track (din rail) screw mounting.front terminal protective cover for safety.led indication for timing in progress.a1da : external (zero volt potential free) command contact for timing initiation.

View Complete Details

Ask Latest Price & Details

Tachometers

We are offering tachometers. Product features: micro-controller based design with world class indian software.non-contact sensing through reflected light beam on reflective sticker.lcd displayinput sensing indication through led.memory facility to retain measured value.portable, lightweight, strong and elegant abs enclosure.accuracy: 1rpm up to 5, 000 rpm and 0.05% of the reading above 5, 000 rpm.resolution: 0.1rpm up to 5, 999 rpm and 1rpm at and above 6, 000rpm.calibration certificate provided along with tachometer - traceable to national and international standards.

View Complete Details

Ask Latest Price & Details

Temperature Controllers

We are offering temperature controllers. Product features: universal input (j, k, pt-100) selectable.wide voltage range.on off or self-tuned function selectable.single double set point.over voltage protectioncompensation offset feature available in tx7-ua user friendly programming through increment decrement button (tx7-ua)indication for sensor, funtion and relay status.program enable disable for sensor, function, hystersis, compensation features in tx7-ua. Dimension 72x72x128.5

View Complete Details

Ask Latest Price & Details

Time Switches

We are offering time switches. Product features: battery operated (2nos x 1.5v dc, aa size) real time clock in 24 hour format.switches on and off 4 times in a day with respect to real timeled indication for relay status.lcd display for real time clock.user friendly programming.manual over ride facility.clock hours and clock minute buttons can be enabled by shorting terminals to program rtc.ts-203 : suitable for panel flush mountingts-203b : program hour and program minute buttons can be enabled by shorting terminals to program the loads start time and duration for which the load should be onsuitable for din rail mounting.

View Complete Details

Ask Latest Price & Details

Digital Monitoring Device

We are offering digital monitoring device din sized enclosure with auto manual switchled indication for relay statusct primary can be programmed up to 2500 in steps of 5. Ct secondary will be factory set for 5.user can set the in-rush time delay.pvmd, pvmd-g :monitors and trips the circuit after the set trip delay time when ever power unhealthiness (phase failure, phase sequence, phase unbalance under voltage or over voltage) occurs.displays all the 3 phase voltages in a scrolling fashion during healthy condition.pvmd panel flush mounting, pvmd-g din rail mounting.pvimd, pvimd-g: monitors and trips the circuit after the set trip delay time when ever power unhealthiness (phase failure, phase sequence, phase unbalance under voltage, over voltage, under current or over current)displays all the 3 phase voltages and 3 phase currents in a scrolling fashion during healthy condition.user can program nominal current. Under current and over current limits can be set in percentage with reference to nominal current .pvimd panel flush mounting, pvimd-g din rail mounting

View Complete Details

Ask Latest Price & Details

Hour Meter

We are offering hour meter 5 digit lcd displaystart signal- continuous, 12v ac to 240v ac, 12v dc to 220v dcbattery operatedreset terminal available at rear for resetting.resolution- 1hr (1 sec if min: sec button on front panel is pressed.)

View Complete Details

Ask Latest Price & Details

Dc Multifunction Meter

We are offering dc multifunction meter.Product features: micro controller based 3 channel dc energy meter.displays dc parameters v, i, kw, kwh , mwh& load on hours of all three channels.displays one set old energy readings and communication status.display hold scroll facility available.programmable shunt ratios.alphanumeric display for parameter & valuesrs-485 serial port with modbus rtu output.wide input voltage and current range.protection from dust and water as per ip-51.

View Complete Details

Ask Latest Price & Details

Programmable Fault Annunciator

We are offering programmable fault annunciator.Product features: sleek, light weight, abs enclosuresuper bright, red color smd, led for fault indicationstest mute acknowledge reset (buttons in front and terminals at rear) are available.multiple units terminals can be connected in parallel to achieve more windowseach window can be programmed for fault inputs as no or nc and output as alarm or tripabove program can be locked by removing the short link across specified terminalsover voltage protectionbasic models: m2-2 m2-4 m2-6 m2-8advanced models: m2-12 m2-16 m2-24available in 12, 16 and 24 windows respectivelyavailable in wide auxiliary voltage range of 85-270v acdc.advanced models with additional features: m2-12r m2-16r m2-24rrs485 output signals are available for displaying fault and healthy status of each window.repeat relay cards having 8 (c-no) outputs can be supplied on order to connect the main unit to 1, 2 or 3relay cards (as required) in a daisy chain arrangement and achieve one output for each window.internal resettable fuse for protection of device against voltage fluctuations. Digital display will blink whenever voltage exceeds specified voltage range. Switch off the unit for sometime & then switch on when voltage returns to normal.

View Complete Details

Ask Latest Price & Details

Analog Monitoring Device

We are offering analog monitoring device.Din sized enclosure with automanual mode.front button and external potential free (zero voltno voltage)terminal contacts for resetting in manual mode.led indication for power , relay status and fault condition.trip delay time and limits of all parameters are factory set.monitors phase sequence , failure, unbalance and under voltage in a 3 phase 3 wire system and trips under such conditions.

View Complete Details

Ask Latest Price & Details

Motor Protection Relay

We are offering micro controller based motor protection relay. (panel flush mounting.)parameters: phase- phase missing (failure), phase reversal (sequence) and phase unbalance, voltage under voltage, over voltage based on 415v ac, current under current, over current based on nominal current set, under frequency, over frequency .earth leakage fault.relay can be programmed for relay to get energized during healthy or unhealthy condition.instant values of parameter displayed during healthy status. Reason for tripping displayed during unhealthy status.unhealthy status will be displayed till the user acknowledges in manual mode.auto manualprogram lock facility available.bypass of unwanted parameter can be programmed.ct primary can be programmed up to 2500 in steps of 5. Ct secondary will be factory set for 5.mpr-e1 panel flush mountingtrip delay time programmable for each parameter separately.

View Complete Details

Ask Latest Price & Details