Electromotive Engineers

Saha, Ambala, Haryana

We are offering lab conductivity meter. Electromotive's digital conductivity meter is a solid state instrument designed to provide the precise total dissolved measurement. The instrument is deal for monitoring salt contents in natural water, drinking water, brinesolution, sea water and soluble salt in solids. A multi position selector switch quickly sets the digital display to the desired test range. The led display is easy to read even in the dark. The use of solid state circuitry makes it more versatile & reliable. The instrument is extremely useful foragriculture and soil analysis laboratories, swimming pools, water departments, fertilizer plants, petroleum refineries, transport undertakings, breweries, textiles plants rayon & silk mills.Specifications:range : mhos: 200 mhoscm to 1000m mhoscm in 5 rangesaccuracy : +- 0.3% f.s. 200 mhoscm to 200m mhoscm.+- 1%f.s in last range 1000m mhoscm.Resolution : 0.1

We are offering eht power supply. Extra high tension power supply has been developed by "electromotive engineers" to study the experiments on high voltage tubes. Following are the specifications: mains input : 220v ac @ 5060hz output dc : 0-5000v dc output dc current : 3ma max. Protection : fuse & electronic overload regulation: line & load meter : digital, led type output ac volts : 6.3 v ac fixed output ac current : 2 a max. All in nicely powder coated metal cabinet.

We are offering spectrum tube power supply. With the efforts of "electromotive engineers" this spectrum tube power supply is specially designed to safely run spectrum discharge tubes of length approximately 26 cm. Encased in a powder coated metal body, and spring loaded with clips to connect the tubes securely. It is available in two models : stps01 - the holders for the spectrum tube are fixed & tube of length of 26cm approx. Is used. Stps02 - one holder is fixed while the other can be moved up & down to lodge spectrum tube of different lengths. Technical details: input voltage = 120vac, 5060hz or 220vac, 5060hz (as required) output rated: 3, 000v without spectrum tube (approx.) varies from 1, 000v to 2500v @10ma with spectrum tube (depends on type of tube) operating temperature: 5 degree c to 60 degree c.

We are offering multifunction stop watch. Multifunction stopwatch as the name suggest can perform multifunction developed by "electromotive engineers". It has following mode of operations: a) stopwatch: in this mode it operates as a stopwatch with single push of start button & made to stop with the help of same button. Reset button is used to make the count zero, b) clock: in this mode it increments the count like a clock, as start button is start the time start increases like as clock & it can be stopped or reset. C) count: in this mode it operates like a counter. On every push of the button one count is incremented on the count display. D) timer: in this mode time value is set on the display & as the timer is initiated, the count starts decreasing like a count down timer. recently developed at electromotive engineers using embedded skills & housed in plastic cabinet.

Stopwatch or stop clock is the instrument which gives the measure of time. Electromotive Engineers has designed a stopwatch which measures the time in seconds. It has user friendly controls to make it start/ stop, reset and range. Seven segment LED display provides good readability from a distance. The resolution of the watch can be selected to .001 sec or 0.01 sec or 0.1 sec this means that time can be measures as 9.999 sec or 99.99 sec or 999.9 sec.

Specifications:

INPUT MAINS : 220V AC @ 50/60 Hz

DISPLAY : LED (7 SEGMENT)

MAX. COUNT : 9999

RESOLUTION : 1mS, 10mS, 100 mS

MODE : START/STOP/RESET/RANGE

DIMENSIONS : 173 X 130 X 60 mm

NET WEIGHT : 484 grams (approx.)

GROSS WEIGHT : 634 grams (approx.)

Electromotives variable DC power supply suits for every testing application for school and college labs. Its design make it very user friendly and easy to operate. Cabinet is duo combo of metal & plastic. Three core mains lead provides foolproof earthing and for display of output DC volts and DC current, two analogue meters (EDM-80 with reflective mirror to minimize parallax error) are fitted on panel. Both the voltage & current have fine and coarse adjustments and visual indication for constant current/voltage mode makes this power supply more versatile.

Specifications:

Input Volts : 220V AC @ 50/60 Hz

Output Volts : 0-30V DC (continuous variable)

Output Current :0- 5A DC

Output Wattage : 150W

Line Regulation CV : +(0.15% + 10 mV)

Load Regulation CV : +(0.15% + 10 mV)

Current Limit : 0-5A

Protections : Fuse on AC mains input, electronic overload & short circuit on output DC

Display : Two analogue meters for DC volts and DC current display

: LED indication for CV or CC mode

Operating temperature : 0-50 degree C

Training board consist of two units namely control unit and LED/Solar cell unit. It is used to draw the characteristic of solar cell by making the light fall on solar cell from different distances, also by varying the area on which the light is falling on solar cell. Also provided with a variable load of 1100 ohms. Control unit: Control unit consist of a variable power supply for LED to vary its intensity, two digital panel meters of 2V and 2 mA. Input for solar cell and variable load of 0 1100 ohms. Cabinet is duo combo of metal and plastic and it is powered by three core lead to provide foolproof earthing to metal parts. Kit includes patch cords and a working manual. LED/Solar Cell Unit: This unit consists of an aluminum rail with 50 cm scale printed on it. Two plastic riders are placed on this rail and can be moved and locked at any position on the rail. Riders have the provision to hold solar cell and LED light source. LED source is connected to the power supply on control unit and the output of solar cell is also connected at the input on control unit. LED light source is fitted with a diaphragm to vary the illuminated area on solar cell. Light Source: LED Solar Cell: Round (44 mm dia, )

We are offering component boards. Our provided component boards are developed to educate the students about the electronic components used in electronic circuits. Made on glass epoxy with the electronic component mounteds oldered on the board. We offer these component boards at most affordable prices to our precious customers.