Filters #1676526

We offer Industrial Filters. CARVE EDM is the leading manufacturers of Industrial Filters with the experience of more than 5 years. We have a wide range of Filters: Air Oil Separators,
Railway Air Conditioning Filter,
Fuel Filters,
Carbon Filters,
Air Filter,
Bag Filter Pocket Filters Dust Collector Filter,
Fine Filter AHU Filter,
Oil Filter,
HEPA Filter High Efficiency Particulate Air Filter,
Hydraulic Filters,
Mini Plate HEPA Filter,
Pre Filter Air Handling Unit Filter,
Wire Mash Filter Metallic Viscous Filter Fan Coil Unit Filter,
Filter Pads Sparkler Filter Demister Pad Filter Disc,
Vacuum Cleaner Air Filters Vacuum Filter,
Filters For Wire Cut E.D.M Filter,
Baffle Filters Kitchen Hood Filters Hood Filters,
Hepa Filter Terminal Box,
Fluid Bed Dryer Bags,
Hvac Filter,
Microwave Filters,
Rod Type Filters ROD Frame Type PRE Filter.

We offer Wire Mesh Filter which are specially designed filters used in air washers or fresh air units. These are very useful in dusty surroundings where filters are to be cleaned very frequently and these filters can be cleaned very easily. A standard wire mesh filter has seven layers of aluminium wire mesh in a frame made out of heavy gauge GI sheets or aluminium sheets. Two extreme layers are for support only which has bigger gaps and the rest five layers of small gaps are corrugated and plain meshes placed alternatively. These filters are capable of cleaning the air upto 30 microns of dust particles. Filters of higher rating like 10 micron or 3 micron are also available.

 

Specifications

• Efficiency : Standard metallic viscous filters have an efficiency of 65% for 20 micron size particles. Metallic filters with an efficiency rating of 65-85% to capture 25 micron to 50 micron size particles are also available on order. Efficiency can be increased to 85% if the filters are oil wetted.
• Frame Type : Available in flange or box type GI, Al, SS.
• Filter Media : GI or SS aluminum expanded mesh, face guard filter is protected with expanded mesh on both sides pressure drop initial pressure drop 1mm WG and recommended final pressure drop is 5-10mm WG operating conditions filter can withstand temperature >80âºc and relative humidity of 70%. Recommended air velocity is 2msec to 2. 5msec. Filter is washable and can be washed using water or back air pressure and reused.

Applications

• Air handling units
• Automatic drain holes
• Paint shops
• Textile mills
• Cement factories
• Miscellaneous industrial ventilation

We specialize in offering a variety of Oil Filters meeting the requirements of automobile industry. The durable construction employed in the oil filters, helps withstand the high oil pressures. These help in removal of the unwanted particles from oil content. This helps in screening out the most harmful contaminants that ensures a higher performance of the machine. Besides, these can be custom designed according to the client’s specifications.

Specifications

• Dimensions : a. Height: b. Outside Dia: c. Inside Dia:
• Filter Material : Yellow Wood pulp
• Caps Material : Anodized plate, Galvanized plate
• Inner Frame : Galvanized punched-plate, Stainless Steel punched-plate

 

Features

• Complex structure, high filtering precision
• Large dirt holding capacity, long service life time
• Good corrosion resistance and pressure resistance
• Increased flow quantity per unit area
• Woven type stainless steel mesh with homogeneous pore distribution
• High strength
• Easy to clean
• High efficiency air filter
• Low resistance
• Used to prevent against leakage
• Keeps oil fuel clean
• All parts are under rigid quality control before shipment

The Fuel Filter, offered by us, protects the engine supply system (carburetor or injector) by eliminating and impurities from the fuel. Filtered fuel thus helps to increase engine performance and service life. Fuel filter will reduce energy costs and help fight polluting through their filtering ability of removing all dusts and impurities in fuel (light oil) that goes to the injection part of carburetor by using proper filters according to their uses of gasoline, petrol & diesel vehicles.
It must provide a sufficiently high filtration threshold to protect the injectors, in other words by systematically stopping a spectrum of harmful particles with sizes ranging from 5 to 20 microns. It must also maintain filtration performance over time thanks to high contaminant retention levels, without pressure drop due to blockage of the media thereby affecting the fuel to the injection system.

We offer Mini Plate HEPA Filters. Manufactured to the highest standards of performance and stability, the range of HEPA filters is ideally suitable for protection against harmful particles emitted from radioactive substances. The Mini Plate HEPA Filters offered by us is in compliance with the ashrae testing and has the ability to capture 99.97% of particles which are more than 0.3 microns in diameter. Furthermore, these filters are also used post filters on a multiple filter dust collection system, as a post filter in an ambient air cleaner that helps in removing light atmospheric dust from breathing zones.

Technical Specifications

• Flange type & box type
• Customized sizes are available on request
• Filtration rating : 0. 3 micron & more
• Frame material : SS 304 GI (galvanized steel) aluminum.
• Filtration efficiency : 90 – 99. 9 %
• Filter media : glass fiber media spun bonded polyester media

We offer Rod Type Filters to the clients. Pre Filters are designed to meet the requirements of high efficiency filtration under high chemical exposure and high humidity conditions.

 

These are available in 3 different variations namely :

• HDPE (High Density Polythene)
• Pleated rod type
• Pleated Channel type
• Rod-Frame type PH Filter

 

All the pre filters are made under strict quality control scanner for complete customer satisfaction and comply with recent ASHRAE 52.2EN779EUROVENT standards. Rod Frame Type Pre Filter is made from high quality synthetic non-woven media, supported by stitching HDPE media on both sides. Media is then stitched and housed inside a rod frame.

We offer Vacuum Cleaner Filters to the clients. Vacuum Cleaner Filter is a round type micro fine filter VCT vacuum cleaner air filters. We manufacture a wide range of vacuum cleaner air filters which come on different sizes and shapes. These find applications in automobile and ventilation allied industries.

Specifications

• Shape : round or panel type (with or without flange)
• Frame type : GI, SS, Aluminium
• Media : non-woven synthetic glass fiber media
• Support : synthetic media is sandwiched between expanded wire mesh and then pleated and glass fiber media is supported and protected by perforated GI, SS, Aluminium sheet from the outside
• End caps : made of GI, aluminium. SS
• Gasket : silicone rubber gasket is used
• Sealant : PU based sealant is used to seal all joints in the filters

We are offering HEPA Filters which is a high efficiency particulate air filter manufactured to the highest standards of performance and stability. The HEPA Filters are ideally suitable for protection against harmful particles emitted from radioactive substances. HEPA Filter offered by us is in compliance with the ashrae testing and has the ability capture 99.97% of particles of more than 0.3 microns in diameter. Furthermore, these filters are also used post filters on a multiple filter dust collection system, as a post filter in an ambient air cleaner that helps in removing light atmospheric dust from breathing zones.

Technical Specifications

• Flange type & box type
• Sizes available : 610 mm x 610 mm x 50 mm 100 mm 150 mm 300 mm, 545 mm x 545 mm x 50 mm 100 mm 150 mm 300 mm, 545 mm x 545 mm x 50 mm 100 mm 150 mm 300 mm
• Customized sizes are available on request
• Filtration rating : 0.3 micron & more
• Frame material : SS 304 GI (galvanized steel) aluminum.
• Filtration efficiency : 90 to 99. 9 %
• Filter media : glass fiber media spun bonded polyester media
• BS EN 779 class - H10, H11, H12, H13, H14 up to U17
• Filter efficiency - h10 - 95 % @ 0.3 micron
• H11 - 99.9 % @ 0.3 micron
• H12 - 99.97% @ 0.3 micron
• H13 - 99.99% @ 0.3 micron
• H14 - 99.999% @ 0.3 micron
• Eurovent class : EU 10, EU 11, EU 12, EU 13, EU 14 up to u17

 

Applications

• Clean rooms for micro component electronic manufacture & assembly
• Pharmaceutical processing.
• Aerospace engineering
• Genetic & biological research
• Biohazard atmosphere
• Laminar flow workstations
• Bio safe hood biological safety cabinets
• Hospital operating theaters & intensive care unit.
• Atomic research.
• Pre filter stage to ULPA systems

We are offering industrial filter, hvac filters. hvac filter there is an increasing need for cleaner environment be it office, plants and homes. We have a wide range of air filters used in hvac systems, ahu systems and for other industrial blower applications where dust and dirt are to be removed.
we offer a wide range of air filters for this application. They have different names, panel filters, box or flange type, blower filters, pocket filters, mini pleat and deep pleat filters.
a: deep pleat filter
b: mini pleat filter
c: pocket filter
d: pre filter
e: panel filter
f: frp coated air filter

We are offering Hydraulic Filters to the clients. Hydraulic Filter elements ensure you the highest beta ratio, with high contamination control and also high dirt holding capacity with longest element life. Filter elements are available in various styles and configurations as per the requirement of hydraulic systems.

SpecificationsFor pressure line and return line filters type :

• High pressure elements
• Low pressure elements
• Return line elements size : multiple length elements
• Filtration media & micron : micro glass beta 75 in 1, 3, 5, 10, & 25 micron
• Cellulose : 3, 10, 25 micron
• Stainless steel woven wire from 5 to 200 micron temperature range : 10^o C to 100^o c
• For suction strainers

 

Size : multiple length elements filtration media & micron: stainless steel woven wire 125 micron

Micro glass beta : 75 in 3 to 10 microns.

Applications

• Hydraulic fluids
• Oil coolants
• Cutting oil
• Lubricants

Our organization offers a wide range of Bag Filter, which is manufactured using non woven filter media. This media is thermal bonded, fire retardant and progressively structured with clean air side that ensures the retention of solid particles up to stipulated micron rating. Furthermore, the filter is covered with the sustaining layer of spun bonded media and these pockets are fabricated in galvanized iron casing M. S powder coated. The filter media is sealed with thermal bonding or stitching as per the requirement of the client.

 

Details

• Type : Box & Flange
• Frame : Metallic Sheets Rods With Powder Coating
• Media : Thermally Bonded Synthetic Filter Media
• Efficiency : 50-99% Down To 20-3 Micron Recommended
• Final PR. Drop : 40 MM WC
• Temp : 700^o C Max
• Filtration Rating : 1, 5, 10, 25 micron

We are offering Carbon Filters which are mainly used in removing the color, odor, smell, and unwanted chlorine from the water. These filters are extensively used for various filtration applications such as potable water, oil removal, effluent plants, chemical plants, and boiler feed. The carbon filtered water finds wide usage in general purpose like bathing, washing of cloths and utensils.

Specifications

• Shape : Round or panel type (with or without flange)
• Frame type : GI, SS, aluminium
• Media : Non-woven synthetic glass fiber media
• Expanded aluminium mesh : Activated charcoal impregnated media
• HDPE mesh support : Anti wobbling technique is used to support large frames
• Nominal micron rating