Our Product / Services
Electrical Cables & Wires
2 Products availableWires
2 Products availableConstruction Services
1 Services availableIndustrial Designing, Plant & Equipment Installation
1 Services availableSubmersible Cables
1 Products availableIn the ABC system, the insulated aluminum conductors (3 or 4 numbers as required) are twisted around a high strength aluminum alloy bearer wire which covers the main weight and also serves as the earth cum neutral wire.
The phase conductor is not under tension. Due to theft prevention, heights of pole elimination of insulator and associated hardware and the possibility of using small sizes of phase conductors like 16 sq. mm in certain location the overall cost of the ABC lines is practically the same as in conventional overhead lines.
Our AB cables are manufactured as per national and international specifications and as per customer requirements. Due to various customers’ requirements the composition and designation of cables are different. Some designations are given on left side of the table mentioned below.
The first part of the designation refers to the numbers and size of the phase conductor, the middle to the street light conductor (where provided) and last to the bare messenger wire. The sizes shown are the nominal cross sectional areas.
Specification
S. No. | Nominal Cross Sectional area of phase Conductor mm2 | Nominal Cross Sectional area mm2 | Maximum dc Resistance at 200C kn | Minimum Breaking Load Kn |
1 | 16 | 25 | 1.38 | 7 |
2 | 25 | 25 | 1.38 | 7 |
3 | 35 | 25 | 1.38 | 7 |
4 | 50 | 35 | 0.99 | 9.8 |
5 | 70 | 50 | 0.69 | 14 |
6 | 95 | 70 | 0.49 | 19.7 |
Specification
S. No. | Designation |
1 | 1 x 16+25 |
2 | 2 x 16+25 |
3 | 3 x 16+16+25 |
4 | 1 x 25+25 |
5 | 3 x 25+16+25 |
6 | 3 x 35+25 |
7 | 3 x 35+16+25 |
8 | 3 x 50+16+35 |
9 | 3 x 70+16+50 |
10 | 3 x 95+16+70 |
The mixed construction of ACSR makes it a very flexible medium from a design point of view in Electrical Transmission & Distribution.
By varying the relative proportion of aluminum and steel the ideal conductor for any particular application can be produced. Generally, ACSR consists of galvanized steel core 1 wire or 7 wires or 19 wires surrounded by concentric layer of aluminum wires.
Construction ratio of aluminum and steel varies with requirement of current carrying capacity. We manufacture ACSR conductors considering National and International standards.
Specification
Code Word | Nominal Aluminium Area | Stranding & Wire dia | Sectional Area | Total Sectional Area | Approx. Overall Diameter | Approx. Weight | Calculated Resistance At 200C | Approx. Calculated breaking Load | |||||||||||||||||
Sq. mm | No./mm | Sq. mm | Sq. mm | mm | Kg/km | Ohm/km | KN | ||||||||||||||||||
Alum. | Steel | Total | Alum. | Steel | |||||||||||||||||||||
Mole | 10 | 06/01/50 | 01/01/50 | 10.6 | 12.37 | 4.5 | 43 | 29 | 14 | 2.78 | 3.97 | ||||||||||||||
Spl. Conductor | 18 | 06/01/96 | 01/01/96 | 18.1 | 21.12 | 5.88 | 73 | 50 | 23 | 1.62 | 6.74 | ||||||||||||||
Squirrel | 20 | 05/02/11 | 01/02/11 | 20.98 | 24.48 | 6.33 | 85 | 58 | 27 | 1.39 | 7.61 | ||||||||||||||
Weasel | 30 | 06/02/59 | 01/02/59 | 31.61 | 36.88 | 7.77 | 128 | 87 | 41 | 0.93 | 11.12 | ||||||||||||||
Rabbit | 50 | 06/03/35 | 01/03/35 | 52.88 | 61.7 | 10.05 | 214 | 145 | 69 | 0.55 | 18.25 | ||||||||||||||
Raccoon | 80 | 06/04/09 | 01/04/09 | 78.83 | 91.97 | 12.27 | 319 | 217 | 102 | 0.37 | 26.91 | ||||||||||||||
Dog | 100 | 06/04/72 | 07/01/57 | 105 | 118.5 | 14.15 | 394 | 288 | 106 | 0.28 | 32.41 | ||||||||||||||
Wolf | 150 | 30/2.59 | 07/02/59 | 158.1 | 194.9 | 18.13 | 726 | 438 | 288 | 0.19 | 67.34 | ||||||||||||||
Panther | 200 | 30/3.00 | 07/03/00 | 212.1 | 261.5 | 21 | 974 | 587 | 387 | 0.14 | 89.67 | ||||||||||||||
Kundah | 400 | 42/3.50 | 07/01/96 | 404.1 | 424.2 | 26.88 | 1281 | 1120 | 161 | 0.07 | 88.79 | ||||||||||||||
Zebra | 420 | 03/18/54 | 07/03/18 | 428.9 | 484.5 | 28.62 | 1621 | 1187 | 434 | 0.07 | 130.32 | ||||||||||||||
Moose | 520 | 04/13/54 | 07/03/53 | 528.5 | 597 | 31.77 | 1998 | 1465 | 539 | 0.06 | 159.6 | ||||||||||||||
Markulla | 560 | 04/13/42 | 07/02/30 | 562.7 | 591.7 | 31.68 | 1781 | 1559 | 228 | 0.05 | 120.16 | ||||||||||||||
Bersimis | 690 | 42/4.57 | 07/02/54 | 688.9 | 724.4 | 35.04 | 2187 | 1907 | 280 | 0.42 | 146.87 |
These Aluminium Alloy Conductors are heat treated magnesium silicon type. The Alloy ref erred to have higher strength but lower conductivity than pure aluminum.
Being lighter, alloy conductors can sometimes be used to advantage in place of the conventional ACSR conductors. Their use becomes favorable when ice and wind loadings are low.
We manufacture Aluminium Alloy Conductors as per National and International standards and also as per specifications and requirements of customers.
Specification
Actual Area | Stranding & Wire Dia | Approx. Overall Dia | Approx. Mass | Calculated Resistance at 200C (Max.) | Approx. Calculated Breaking Load |
Sq. mm | Nos./mm | mm | Kg/km | Ohm/km | KN |
15 | 03/02/50 | 5.39 | 40.15 | 2.3 | 4.33 |
22 | 07/02/00 | 6 | 60.15 | 1.54 | 6.45 |
34 | 07/02/50 | 7.5 | 94 | 0.99 | 10.11 |
55 | 07/03/15 | 9.45 | 149.2 | 0.62 | 15.03 |
80 | 07/03/81 | 11.43 | 218.26 | 0.43 | 23.41 |
100 | 07/04/26 | 12.78 | 272.86 | 0.34 | 29.26 |
125 | 19/2.89 | 14.45 | 342.51 | 0.27 | 36.34 |
148 | 19/3.15 | 15.75 | 406.91 | 0.23 | 43.5 |
173 | 19/3.40 | 17 | 474.02 | 0.2 | 50.54 |
200 | 19/3.66 | 18.3 | 549.4 | 0.17 | 5866 |
232 | 19/3.94 | 19.7 | 636.67 | 0.15 | 68.05 |
288 | 03/15/37 | 22.05 | 794.05 | 0.12 | 64.71 |
346 | 37/3.45 | 24.15 | 952.56 | 0.1 | 101.58 |
400 | 37/3.71 | 25.97 | 1101.63 | 0.08 | 117.4 |
465 | 37/4.00 | 28 | 1280.5 | 0.07 | 136.38 |
525 | 03/31/61 | 29.79 | 1448.39 | 0.07 | 146.03 |
570 | 61/3.45 | 31.05 | 1573.71 | 0.06 | 158.66 |
604 | 61/3.55 | 31.95 | 1666 | 0.06 | 167.99 |
642 | 61/3.66 | 32.94 | 1771.36 | 0.05 | 178.43 |
695 | 61/3.81 | 34.29 | 1919.13 | 0.05 | 193.25 |
767 | 61/4.00 | 36 | 2115.54 | 0.04 | 213.01 |
Between the generating station and consumer, electric power travels through several substations at different voltage levels. These substations are used for stepping up & stepping down the voltage and perform several other important functions. If you are looking for a dependable entity that can undertake your substation erection requirements, then you have landed on the right webpage. We, NIIL based in Indore (Madhya Pradesh, India), have been providing substation erection services since 2009. The company has all the modern resources and techniques to design, plan, estimate and develop the undertaken substation erection work.
The main purpose of a substation is to step down the high voltage electricity so it can be easily supplied to homes and businesses through the distribution lines. And, we are providing substation augmentation services from Indore (Madhya Pradesh, India). Active since 2009, we have been providing effective solutions to meet the client’s requirements. Whether you want to augment the substation in a hilly terrain or in a plain area, we have enough resources to fulfil your requirements with utmost precision. So, contact us anytime.
Owing to our rich experience and vast knowledge of this domain, we have been able to offer premium quality AAC Conductor to our valuable customers.
These AAC are offered by us at industry set norms. AAC has been in extensive use in urban areas where spaces are usually short but high conductivity is required.
Due to our rich distribution network, we have been able to deliver these conductors within the assured time frame at the customers’ end.
Specification
Code Word | Nominal Aluminium Area | Standing & Wire dia | Sectional Area | Approx. Overall Diameter | Approx. Weight | Approx. Calculated Breaking load | Calculated Resistance at 200C (max) | ||||||
Sq. mm | No./mm | Sq. mm | mm | Kg/mm | Kn | Ohm/km | |||||||
Gnat | 25 | 07/02/21 | 26.85 | 6.63 | 74 | 4.52 | 1.1 | ||||||
Ant | 50 | 07/03/10 | 52.83 | 9.3 | 145 | 8.25 | 0.55 | ||||||
Wasp | 100 | 07/04/39 | 106 | 13.17 | 290 | 15.96 | 0.28 | ||||||
Spl. Conductor | 150 | 19/3.18 | 150.9 | 15.9 | 415 | 23.28 | 0.19 | ||||||
Spider | 240 | 19/3.99 | 237.6 | 19.95 | 654 | 35.74 | 0.12 | ||||||
Butterfly | 300 | 19/4.65 | 322.7 | 23.25 | 888 | 48.74 | 0.09 |