GST : 24AAECE4790L1ZC
Verified
Write a Review
Our Product / Services
Electrical Panels & Distribution Box
2 Products availableCurrent Transformers
2 Products availableDesigning Service
2 Services availableAUTO MAINS FAILURE PANEL
1 Products availableMOTOR CONTROL CENTER PANEL
1 Products availablePOWER SYNCHRONIZING PANEL
1 Products availableELECTRICAL CONSULTANTS
1 Services availableELECTRIFICATION + LIASONING
1 Services available
We are manufacturing 11 KV, 22 KV, 33KV, 66 KV VCB with capacity of 630 A, 800 A and 1250 A of ABB HT Products. We are authorized System Integrator & OEM of ABB India Ltd. for VCBs.
VCB are generally used for Transformer Protection. A vacuum circuit breaker is such kind of circuit breaker here the arc quenching takes place in vacuum. Service life of vacuum circuit breaker is much longer an other types of circuit breakers. There is no chance fire hazard like oil circuit breaker. It is much environment friendly than SF6 Circuit breaker. Beside of that contraction of VCB is much user friendly. Replacement vacuum interrupter (VI) is much convenient.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export packing, Wooden Frame
CSS are Compact Sub Station with VCB or LBS, Dry type Transformer and ABB LT Products in one outdoor unit are generally used in hospitals, hotels, motels, malls where there is space at premium with benefits such as:
Lower installation costs: the packed unit substation is easier to handle on-site and the low voltage section is pre-connected when it arrives on-site.
Easier site handling: arrives as a single shipment, no need to coordinate multiple product deliveries to job site.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing, Wooden Frame
We test following on PCC panels :
POWER C0NTR0L CENTER PANELS mainly used for heavy load distribution systems.
We have complete in-house facility to manufacture PCC panel up-to 6300A, PCC Panels are manufacture by 14/16SWG CRCA duly seven tank powder coated process, and we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware, nut-bolts and washer used in the panels are of S.S. Metals.
The design of the PCC panel are robust and rigidly constructed to suit wide range of industries and buildings, the supporting structure/frame work are made from 3.0/5.0mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protec- tion such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing, Wooden Frame
Type :
AUTOMATIC POWER FACTOR C0NTR0LLING/C0RRECTI0N PANELS mainly used in industries to maintain power factor, the angle between voltage 6 current and harmonic levels.
This is very important for industries to prevent high loses and extra penalty. We have complete in-house facility to manufacture APFC panel up-to 1000KVAR, APFC Panels are manufacture by 14/16SWG CRCA duly seven tank powder coated process, and we have in-house design and development system for improvement of quality and productivity. We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the APFC panel are robust and rigidly constructed to suit wide range of industries and buildings, the supporting structure/frame work are made from 3.0/5.0mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
We have a large experience in power factor solutions, we have resolved many major problems in various kind of industries
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing, Wooden Frame
AUT0 MAINS FAILURE PANEL mainly used for standby power supply, where one source disconnected, automatically it starts to another source and change over the load into the live source of the power supply.
AMF panel transfer the load on Main default Power source, AMF Panel always keeps Load on the Main Supply by default. We have complete in-house facility to manufacture AMF panel up-to 1000KVA, AMF Panels are manufacture by 14/16SWG CRCA duly seven tank powder coated process, and we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are duly Zinc plated process by in-house facility.
The design of the AMF panel are robust and rigidly constructed to suit widerange of industries and buildings, the supporting structure/frame work are made from 3.0/5.0mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing, Wooden Frame
Type of starter (MCC Panel):
MOTOR CONTROL CENTER PANELS used fairly protection, controlling, 0N/0FF of motors
We have complete in-house facility to manufacture MCC panel up-to 750kW, 1000HP, all starters are type-2 coordinated desired rating selection, MCC Panels are manufacture by 14/16SWG CRCA duly seven tank powder coated process, and we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the MCC panel are robust and rigidly constructed to suit wide range of industries and buildings, the supporting structure/frame work are made from 3.0/5.0mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export packing, Wooden Frame
FEEDER PILLARS also known as Distribution Boards / out-Door Panels, used for power distribution, where normal Load shearing.
We have complete in-house facility to manufacture FEEDER PILLARS panel up-to 1000A, FEEDER PILLAR Panels are manufacture by 14/16SWG CRCA duly seven tank powder coated process, we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the FEEDER PILLAR panel are robust and rigidly constructed to suit wide range of industries and buildings, the supporting structure/frame work are made from 3.0/5.0mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing , Wooden Frame
Synchronizing Between
Auto Synchronizing is part of the AMF panel. It is used when more than two power source parallel used in single load.
We have complete in-house facility to manufacture SYNCHRONIZING PANEL between any number of loads, SYNCHRONIZING PANEL are manufacture by 14/1dSWG CRCA duly seven tank powder coated process, we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the SYNCHRONIZING PANEL are robust and rigidly constructed to suit wide range of industries and buildings, the supporting structure/frame work are made from 3.0/5.0mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing, Wooden Frame
DISTRIBUTION PANELSare used to control and distribute appropriate amounts of power to each of your electrical circuits.
We have complete in-house facility to manufacture DISTRIBUTION PANELS up-to 250A, DISTRIBUTION PANELS are manufacture by 14/16 SWG CRCA duly seven tank powder coated process, we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the DISTRIBUTION PANEL are robust and rigidly constructed to suit wide range of industries and buildings the supporting structure/frame work are made from 3.0 / 5.0 mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 layer Export packing + Wooden Frame
Meter panels are a kind of control panels which are very much required for the domestic as well as industrial purposes for the measurement of amount of power used up and the rate of power consumption.
We have complete in-house facility to manufacture METER PANELS up-to 500A, METER PANELS are manufacture by 14/16 SWG CRCA duly seven tank powder coated process, we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the METER PANELS are robust and rigidly constructed to suit wide range of industries and buildings the supporting structure/frame work are made from 3.0 / 5.0 mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing + Wooden Frame
The Power Distribution Board - also known as a PDB panel - is an element of an electrical network which distributes electrical power into subsidiary circuits.
We have complete in-house facility to manufacture PDBPANELSup-to 1000A, PDBPANELSare manufacture by 14/16 SWG CRCA duly seven tank powder coated process, we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the PDBPANELSare robust and rigidly constructed to suit wide range of industries and buildings the supporting structure/frame work are made from 3.0 / 5.0 mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing + Wooden Frame
PCC WITH APFC PANELS is used in industries for heavy load power distribution with maintain power factor, the angle between voltage & current and harmonic levels.
We have complete in-house facility to manufacture PCC WITH APFC PANELS up-to 5000A, PCC WITH APFC PANELSare manufacture by 14/16 SWG CRCA duly seven tank powder coated process, we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the PCC WITH APFC PANELSare robust and rigidly constructed to suit wide range of industries and buildings the supporting structure/frame work are made from 3.0 / 5.0 mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing , Wooden case
Note: CT Rating should selected in between 40% to 90% of the full load rating
Calculation of va burden :Theare are two types of burden while measuring on meter
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Corrugated Box Packing , 5 Layer Export Packing
Molded Case
| Primary Ration | VA Range | Busbar Size |
|---|---|---|
| 50A | 3 VA & 5VA | Maximum Size 30x10mm |
| 60A | ||
| 100A | ||
| 150A | ||
| 200A | ||
| 250A | ||
| 300A | ||
| 400A |
Electro Control System India PVT LTD provide complete facilities of Electrical Consultancy Services. Service type of Electrical Consultancy Services is offline. Electricians, Material and EPC Services are included in Electrical Consultancy Services
Electro Control System India PVT LTD provide complete facilities of Electrical Liasoning Services. Service type of Electrical Liasoning Services is offline. Usage of Electrical Liasoning Services is Offline. We are Professional Experience Of Service Provider. We provide this service in all over PAN India.
Electro Control System India PVT LTD provide complete facilities of Electrical Design Service. Service type of Electrical Design Service is offline. Type Of Construction Electrical Design Service is Power generation and transmission. We provide Solar epc serviced in all over PAN India for many years.
Electro Control SYstem India PVT LTD provide complete facilities of Electrical Contracting Services. Service type of Electrical Contracting Services is On-Site Service. Features for Electrical Contracting Services is Widely Preferred.
Electro Control SYstem India PVT LTD provide complete facilities of Solar EPC Services. Service type of Solar EPC Service is offline. In Solar EPC Services we provide Solar Power Plant Installation Service.
In Solar EPC Services its Installation Method is Manual. We manually installed solar eps services. For coating equipment we use spray. We provide Solar epc serviced in all over PAN India for many years. We have a brilliant team who provides complete end to end installation services.
Electro Control System India PVT LTD provide complete facilities of MEP Consultancy Services. Service type of MEP Consultancy Services is offline. Electro Control Systems India PVT LTD provide MEP Consultancy Services in all over PAN India. Our Service duration for MEP Consultancy Service is 7 to 10 Days.
This Services Includes Mechanical Designs, Electrical Designs and Plumbing Designs as per the Project Requirement
Our Expert Advise and ON site Services Gives More Profit and Productivity
We presents you high performing 11KV LBS Panel that may either are manual or motor operated. These robust Load Break Switches are used in a variety of applications that include transformer switching, Ring main gears (RMG) and Condensers. These Load Break Switches are easy to operate, user-friendly, reliable and have a practical designnd
LBS panels are of a fixed type switch having 3-poles and a spring loaded shaft driving the moving contacts towards the fixed contacts. This is equipped with a trip-free mechanism for opening. LBS can be Tripped by hand push-button, shunt trip coil or a fuse-trip mechanism.
Our Load break switches are extensively used in power plants and distribution networks and are regarded as highly reliable.
We have a dinamic range of Air Circuit Breaker(ACB) with different Amps and brands.
An air Circuit Breaker (ACB) is an electrical device used to provide Overcurrent and short-circuit protection for electric circuits over 800 Amps to 10K Amps. These are usually used in low voltage applications below 450V. We can find these systems in Distribution Panels (below 450V).
Note: CT Rating should selected in between 40% to 90% of the full load rating
Calculation of va burden :Theare are two types of burden while measuring on meter
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Grade Packing + Wooden Frame
Round Case
| Primary Ration | VA Range | Busbar Size |
|---|---|---|
| 100A | 3VA to 15VA | 40X10 |
| 150A | 3VA to 15VA | 40X10 |
| 200A | 5VA to 15VA | 40X10 |
| 250A | 10VA to 15VA | 60X12 |
| 300A | 10VA to 15VA | 60X12 |
| 400A | 10VA to 15VA | 60X12 |
| 500A | 10VA to 15VA | 60X12 |
| 600A | 10VA to 15VA | 80X15 |
| 800A | 10VA to 15VA | 80X15 |
| 900A | 10VA to 15VA | 80X15 |
| 1000A | 10VA to 15VA | 80X15 |
| 1200A | 10VA to 15VA | 100X20 |
| 1600A | 10VA to 15VA | 100X20 |
We have a dinamic range of moulded case circuit breaker(MCCB).
A moulded case circuit breaker (MCCB) is a type of electrical protection device that is used to protect the electrical circuit from excessive current, which can cause overload or short circuit.
We have a dynamic range of Miniature Circuit Breaker (MCB).
An MCB is an automatically operated electrical switch. Miniature circuit breakers are intended to prevent damage to an electrical circuit as a result of excess current. They are designed to trip during an overload or short circuit to protect against electrical faults and equipment failure.
Starter Panels used fairly protection, controlling, ON/OFF of motors.
We have complete in-house facility to manufacture STARTER PANELS up-to 400KW, STARTER PANELS are manufacture by 14/16 SWG CRCA duly seven tank powder coated process, we have in-house design and development system for improvement of quality and productivity.
We provide enough space for incoming and outgoing cable termination, all hardware nut bolts and washer used in the panels are of S.S. Metals.
The design of the STARTER PANELS are robust and rigidly constructed to suit wide range of industries and buildings the supporting structure/frame work are made from 3.0 / 5.0 mm thickness steel section, the doors cover, partitions and panel are fabricated with CNC machines, other high quality hydraulic machine, based on degree of protection such as IP-42, IP-54 or higher degree of protection can be manufactured on request.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 5 Layer Export Packing + Wooden Frame
Alpesh Patel (Electro Control Systems India Pvt. Ltd.)
Plot No. 1123, Aji Industrial Area, Near Accurate Weigh Bridge, 80 Feet Road,, Aji Industrial Estate, Rajkot, Gujarat - 360003
Share us via
View Contact Number 
