Our Products
Cement And Concrete
1 Products availableTexturing Machines
1 Products availableCutting Tools
1 Products availablePower Saws
1 Products availableTapes
1 Products availableProtective Packaging Products
1 Products availableBlades
1 Products availableCement
1 Products availableBrushes
1 Products availableWe offer the best product range of Poly Sulphide Sealant Elcoseal-Psp and Dowel Bar Sleeves.
Technical Specifications : | |
Density | 0.025 - 0.30 gm./ M.3 |
Tharmal conductivity | 0.025 Kcal / M hr C |
Elongation | 150 to 180% |
Diameter Size | As above |
Water absorption | 0.01 gm./cm.2 |
Temperature range | -300C to 600C |
Resiliency | Excellent |
Chemical resistance | Excellent against Acids, Alkali & Solvents. |
Texturing brush for PQC / concrete roads / airports /runways/ rigid pavements / paver machines Sizes available; 3 ft, 4 ft or as per your requirements. Centre to centre distance of bristles ; 10mm, 20mm, 40mm. or as per MORTH specifications.We also make as per clients drawings.
Tapes optimize quantity of sealants avoids third side adhesion of sealants & allows sealants to stretch freely with joints movements. | ||
| ||
Application areas Road Joints, Building Expansion Joints, Window Glazing, Curtain Walls, Stone Cladding etc. Foam Tapes in commercial use
|
Technical Specifications :
Hardness | Soft,Medium,Hard. |
Density | 45 To 150 KG/Cu. M . |
Width | 6 MM To 1000 MM. |
Thick | 1.5 MM TO 50 MM. |
Length | 1MTR/ 2MTR/Higher Length in Rolls. |
The polysulphide sealant is formulated by us with our work experience of more than 20 years in the field. The design features; by taking in to consideration the Indian conditions, the product is designed to perform at all critical conditions. On Air Ports & concrete roads , product meets BS 5212 specifications.
Uses :Dowel bar sleeves are manufactured from high grade, flexible virgin plastic and are designed to form a positive deboned dowelled joint in reinforced concrete construction. The use of Dowel Bar Sleeves overcomes the problems associated with paint, compounds, tapes and greases which if not applied correctly can be ineffective. Material Used :The dowel bars are made using virgin LDPE. Use of recycled plastic not advised as it has negligible flexure. The product complies with requirement MORT&H Specification.602.6.5.5.. Sizes Available :Presently we manufacture a single size sleeve to cater specifically to the RIGID Pavement requirements. However adjustments can be made in order to cater to special requirement as per client demand.STANDARD SIZE : 32+mm diameter x 300mm long x 1.25mm thick sheath.Dowel bar sleeves supplied shall bear the manufacturers name & logo.
The sizes available are 3.2 mm to 3.6 mmThick dia 300 / 350 / 400 mm. to 18mm thickin 2000mm dia.
Cured concrete cutting:The sizes available are 3.5mm to 12 mmthick. Dia 300 to 2000 mm.Used for widening of grove / concrete fulldepth cutting of pavements. |
Asphalt cutting Blades:popularly used for cutting asphalt roads, trimming sides / joints.
Sealant applicator Peristal TIC Pump Developed at Elcon Plant being used for pour Grade P.S. & P.U. at all our site. High speed pouring Can work for 50 to 100 Liters per hour Hydraulic type sealant applicator. Designed for heavy - duty. For fluids of any Viscosity.Delivers 100 to 600 Ltr. / Hr. Pressure development 0 - 150 Kg / SQCM
The solid seal application requires machine power to place the seal inside the grooves.We have developed two types of machines. 1) Auto powered, automatic seal application machine.this runs on petrol engine, It places the seal at place2) Manual applicator machine can be used for small work. Presently we manufacture a single size sleeve to cater specifically to the RIGID Pavement requirements. However adjustments can be made in order to cater to special requirement as per client demand.STANDARD SIZE : 32+mm diameter x 300mm long x 1.25mm thick sheath.Dowel bar sleeves supplied shall bear the manufacturers name & logo.