Our Products
Adaptors, Plugs And Sockets
1 Products availableKitchenware And Cookware
1 Products availableElectric Cable Making Machine
1 Products availableElectrical Cables & Wires
1 Products availableStorage Drums, Tanks & Containers
1 Products availableCables And Wire Accessories
1 Products availableOur offered Product range includes RAPUSH BUTTON STATION, Earthing Material and support systems.
DESCRIPTION
Explosion proof junction boxes with threaded or spigotted covers. Available in six sizes, these boxes provide a wide range of terminations and distribution facilities. Integrally cast plates are provided for different combinations and cable entries on any of the four sides. Weatherproof protection is provided by high quality neoprene 'O' ring gaskets.
ELCON TUBE FITTING are installed in three easy steps.
We give below the specification to be followed for the various tunings for use with ELCON Double Ferrule Compression Fitting.Soft , annealed carbon steel hydraulic tubing to ASTM A 179, Din 2391 or equivalent based on ultimate tensile strength of 47000 psi and for metal temperatures not to exceed 20 deg C to 100 deg C. For higher temperature service, reducing factors for elevated temperature operation as specified in table 302.3 1A and 304.1.2 of the code for pressure piping in ANSI B 31.3 should be applied. The hardness of the tube is recommended to RB 7xThe hardness of the tube is recommended to RB 72 OR less. The Tubes should be suitable for bending and flaring and free of surface defects and imperfections
ELCON is the leading in manufacturing perforated and ladder type cable trays with accessories. Cable Trays are available in different sizes as per the customer specification. we manufactures cable trays in the following thicknesses - 1.2mm, 1.5mm, 1.6mm, 2mm, 2.5mm and 3mm, length- 2.5m, 3m and width - 50mm to 1000mmcable trays are available in different finishes like MS, Hot dip galvanized, pre-galvanized, powder coated, painted etc. The cable tray accessories for perforated ladder type cable trays are vertical bends, horizontal bends, inside bends, outside bends, reducers and tees with radians 300, 600, 900 are available.
ADVANTAGES OF ELCON CABLE TRAY
STRENGTH | Light Duty, Medium Duty & Heavy Duty |
WIDTH (W) | 50 mm to 1200 mm |
SIDE CHANNEL HEIGHT (H) | 50 mm to 150 mm |
RUN WIDTH | 30 mm to 50 mm |
RUN HEIGHT | 10 mm to 20 mm |
RUN C TO C | 25 mm to 100 mm |
THICKNESS (T) | 1.2 mm, 1.6 mm,2mm2.5 mm & 3 mm |
BEND (TB) | 10 mm to 25 mm |
LENGTH (L) | 2500 mm / 3000 mm & 2444 mm |
FINISH | SPECIFICATION | RECOMMENDED USE |
Painted | As per Specification | Indoor |
Powder Coated | As per Specification | Indoor |
Pre Galvanized | As per Specification | Indoor |
Hot Dip Galvanized | As per is 4759, 2629, 2633 | Indoor / Outdoor |
TYPE OF TERMINALS | APPLICATION |
Tubular type terminals ends | Widely used series for soldering or solder less crimping application made from Cu & Al. Standards followed are IS, BS & DIN |
Ring tongue terminals ends | Generally used along with control cables. Various shapes can be made & stud holes as per requirement can be made. |
Reducer type terminals ends | This series is recommended for usage in fuse gears, ICTP switches, watt meters etc. |
Pin type terminals ends | Termination in terminal blocks is being done with pin type terminal ends. Widely used in control panel wiring. Non-insulated, insulated & pre-insulated versions are available. |
Fork Type terminal ends | Fixing arrangement of LV / MV switch gears of different varies & hence to suit those application forks type terminal ends are designed. |
In Line Connectors | For enabling straight through joints of aluminum or copper cables in line connectors are widely used. |