Elak Private Limited

Industrial Area Phase I, Chandigarh

If buyers are looking for a 2 Wheeler Battery Chargers that can charge quickly, correctly and completely, so they are at the right place. We are prominent Manufacturer, Exporter & Supplier of Automatic 2 Wheeler Battery Chargers from Punjab, India. Made as per latest technology, our Battery Chargers can always remain linked to the battery and will not overcharge or damage it. Automatic 2 Wheeler Battery Chargers are obtainable at nominal rates.

The Elak Automatic Battery Chargers are designed for precise charging of lead acid, sealed maintenance free, VRLA (valve regulated lead acid) and other batteries. These batteries require a sophisticated charger to charge them in a precisely regulated fashion specified by the manufacturer to avoid irreversible damage through gassing and shortened service life. The Elak Automatic charger meets the charging specifications of a wide range of VRLA and RG sealed batteries very accurately. The charger delivers a measured constant current to the battery until the manufacturers specified maximum battery voltage is attained. This voltage is then held constant for a specified period to allow a uniform charge across all the plates. The charger may be left connected indefinitely to a fully charged battery without the fear of over-charging or damage.

Features

• Constant Current Charging
• Charges 12V and 24V batteries
• Controlled at all times by a microprocessor
• Reverse Polarity & Short Circuit protected
• Analog ammeter
• Power Supply Voltage : 230V 50 Hz
• Charge Curve : WU

Current 0-15 Amps & 0-10 Amps Output Voltage 12 V & 24 V End Voltage 13.8 V 14.4 V & 27.6 V 28.8 V Dimensions 34 x 26 x 16 (cms) Nett Weight 11 (kgs)

We are offering automatic charger. Elak automatic chargers are designed to provide fast, safe and efficient charging to a wide variety of battery types and sizes. The electronic control circuit monitors the charging process to avoid battery damage caused by overcharging. The charger collects information from the battery and adjusts the charge current and voltage based on this information. This allows the battery to be charged quickly, correctly, and completely when using an automatic battery charger. automatic battery chargers can remain connected to the battery indefinitely and will not overcharge or damage it. technical info automatic battery chargers are fitted with an electronic control circuit which monitors the battery voltage and accordingly supplies the required charging current through thyristors (scrs) to the battery. the chargers have a wu charging characteristics, i.e. Constant current, current voltage. the chargers are protected against over-load, short-circuit and reverse polarity. charging current is indicated by a high quality ammeter. Some models have controls for adjusting the charging current and also the no. Of batteries (12v or 24v). leds are provided to indicate the mode of operation of the charger, whether it is in the charging (boost) mode, or charged (float) mode. some models also have an end voltage selector switch for charging regular lead acid and maintenance free vrla batteries. features :- constant current charging charges 12v and 24v batteries controlled at all times by a microprocessor reverse polarity & short circuit protected analog ammeter power supply voltage : 230v 50 hz charge curve : wu technical specifications :- voltage current end voltage 12 v 0 - 15 a 13.8 v 14.4 v 24 v 0 - 10 a 27.6 v 28.8 v size l x w x h (mm) 340 x 260 x 160 weight 11 kgs.

We offer motorcycle battery charger. The models MX-20 has been designed to charge new generation motor-cycle batteries – especially the maintenance free batteries. unlike the normal flooded lead acid batteries, the m.f. Batteries cannot sustain over-charging. these chargers are therefore designed to charge the m.f. Batteries to a safe level and then reduce the charging current to a trickle. the model MX-20 is capable of charging 2 nos m.f. Batteries. both the models have independent circuits, each with their own current control to charge batteries from 2.5 ah to 9 ah. FEATURES :- Constant current charging Independent current controls for all circuits Charging current reduces to a trickle when battery is fully charged. LED indication to show fully charged battery. Reverse polarity, short circuit & overload protection Specifications :- for charging MC batteries 12 V max. No. Of batteries 2 constant charging current yes charging currents 0.25 0.5 0.7 0.9 A automatic cut-off yes size (cm) 30 x 18 x 20 weight (kg.) 5

Low maintenance and reliable performance are some of the key factors that make our Manual 2 Wheeler Battery Chargers high in demand. We make use of advanced technology for manufacturing these batteries as per quality standards. Our product has the capability to charge four to eight batteries in one time. Manual 2 Wheeler Battery Chargers are configured meter display & switch for the ease of operation and accessible at budget friendly prices.

For charging M.C. Batteries 12 V No. of batteries 6 Constant charging current Yes Charging current 0.25 0.5 0.7 0.9 A Automatic Cut Off Yes Dimensions 39 x 29 x 22 (cms) Nett Weight 11.5 (kgs)

For charging M.C. Batteries 12 V No. of batteries 4 Constant charging current Yes Charging current 0.25 0.5 0.7 0.9 A Automatic Cut Off Yes Dimensions 34 x 33 x 22 (cms) Nett Weight 9 (kgs)

Known for its cost effective and flexible solutions, the company has been involved in providing Fast Battery Chargers, worldwide. The product is designed and made for providing quick charging to the automotives. It is comprehensibly high in demand owing to its immediate positive results. Widely used in showrooms, workshops, etc., our Fast Battery Chargers are easy to move and reasonably priced.

We are offering fast charger. Elak fast chargers and engine starters are designed for quick charging an automotive battery, without having to remove it from the vehicle. These chargers are ideal or charging batteries, which get weak due to non-usage of a vehicle in a garage, workshop, showroom, etc. Depending upon the capacity of the battery these chargers can sufficiently charge the weak battery within an hour or two, to start the vehicle. These chargers can also be used for starting vehicles with weak batteries, specially in winters. Technical info the fast chargers are provided with wheels for ease in mobility. To prevent damage to the battery due to over-charging, it is provided with a timer of 0-120 minutes. Can be used for both 12v and 24v systems the model fc 3024 is recommended for charging and starting car and light commercial vehicles. the model fc 6024 is more suitable for heavy duty batteries used in trucks, buses, earth moving equipments, defence vehicles, etc. FEATURES :- Fast charges batteries No need to remove the battery from the automobile Used for starting automobiles with dead batteries Fitted with 120 minutes timer Wheels provided for easy mobilty Specifications :- full load current 30 amp output voltage 12-24 v timer 0-120 min protection fuse on a.c & circuit breaker on d.c. For charging automotive batteries weight (kg) 41 dimensions (mm) 40 x 26 x 86 ( w x d x h )

Automatic 2 wheeler battery charger features constant current charging independent current controls for both circuits charging current reduces to a trickle when battery is fully charged led indication to show fully charged battery reverse polarity, short circuit & overload protection.

For testing motor-cycle batteries load 10 a - 2.5 ah batteries 40 a - 5 ah batteries size 25 x 10 x 6 (cms) nett weight 1.25 (kgs) battery tester bct-7 mx.

Details :

• ELAK Multi-Battery Chargers are designed for use in workshops, garages, battery service stations and retail outlets, where there is a requirement for charging a number of batteries simultaneously.
• The Multi-battery chargers are available in 10 different models to charge from 2 to 12 batteries, in series. Models are available from 6 Amps to 20 Amps.
• These chargers are also known as 'taper chargers' since charging current reduces gradually, as the battery gets charged. However they will not shut-off automatically. A voltmeter or hydrometer is required to check the battery condition periodically and switch off the charger, once the batteries are fully charged.

 

TECHNICAL INFO :

• All the models operate on single phase 230V 50 Hz. A.C. Mains Supply.
• The chargers are fitted with double wound mains isolated transformer using copper wire. Rectification is done means of a full wave bridge rectifier.
• Charge current and voltage control is effected by means of coarse and fine tapping switches from the mains transformer. Protection for the charger is provided by means of circuit breakers on the A.C. and D.C. side.
• These chargers are built in aesthetically designed thick sheet metal cabinets.

Elak Two-Wheeler Battery Chargers are meant for charging batteries used in Motor-Cycles, Scooters, ATV's, etc.

6 Different models are available. 2 models for manual operation and 4 for automatic operation.

The 2 models of Manual battery chargers can charge from 4 to 8 batteries, in series. The batteries under charge have to be monitored and dis-connected, once they are fully charged.

The Automatic battery chargers can charge battery independently and switch-off, once the batteries are fully charged. These chargers are specially recommended for Maintenance Free batteries which get damaged by over-charging.

TECHNICAL INFO

Automatic Chargers

• Constant current charging
• Independent current controls for all circuits
• Charging current reduces to a trickle when battery is fully charged.
• LED indication to show fully charged battery.
• Reverse polarity, short circuit & overload protection

Manual Chargers

• Series charging
• Rotary switch provided for no. of battery selection
• Rocker switch for Hi-Lo current selection
• D.C. Ammeter provided for current indication
• Protection against short circuit and overload by circuit breakers

We offer Multi Battery ChargersELAK Multi-Battery Chargers are designed for use in workshops, garages, battery service stations and retail outlets, where there is a requirement for charging a number of batteries simultaneously. The Multi-battery chargers are available in 10 different models to charge from 2 to 12 batteries, in series. Models are available from 6 Amps to 20 Amps. These chargers are also known as taper chargers since charging current reduces gradually, as the battery gets charged. However they will not shut-off automatically. A voltmeter or hydrometer is required to check the battery condition periodically and switch off the charger, once the batteries are fully charged. Technical Info All the models operate on single phase 230V 50 Hz. A.C. Mains Supply. The chargers are fitted with double wound mains isolated transformer using copper wire. Rectification is done means of a full wave bridge rectifier. Charge current and voltage control is effected by means of coarse and fine tapping switches from the mains transformer. Protection for the charger is provided by means of circuit breakers on the A.C. and D.C. side. These chargers are built in aesthetically designed thick sheet metal cabinets. SPECIFICATIONS Model NoC 1096 Max Current10 Output Voltage12-96 V Max. no of Batteries8 Dimensions58 x 30 x 51 (cms) Nett Weight34 (kgs)

Constant Current Charging Charges 12V and 24V batteries Controlled at all times by a microprocessor Reverse Polarity & Short Circuit protected Analog ammeter Power Supply Voltage : 230V 50 Hz Charge Curve : WU Voltage Current 12V 0 - 15A 24V 0 - 10A

The models MX-70 have been designed to charge new generation Motor-cycle batteries especially the Maintenance Free Batteries. Unlike the normal flooded Lead Acid batteries, the M.F. Batteries cannot sustain over-charging. These chargers are therefore designed to charge the M.F. Batteries to a safe level and then reduce the charging current to a trickle. The model MX-70 has 3 circuits for M.F. charging and 3 circuits for normal Lead Acid Battery charging. MX-70 has 6 independent circuits, each with their own current control to charge batteries from 2.5 AH to 9 AH. FEATURES :- Constant current charging Independent current controls to all circuits Charging currents reduces to trickles when battery is fully charged LED indication to show fully charged battery. Reverse polarity, short circuit & overload protection.